Metz MF 72TL68, MF 82TL95 manual Daily operation, Setting the operating mode

Page 8

4. Daily operation

Switching on

Switch on the TV set with the main switch. The red standby indicator lights. Then enter the desired programme posi- tion on the numeric keys of the remote control unit.

If you have defined an initial program- me position (see page 46), pressing the key with the TV set in standby mode

will select this programme position.

Switching off

Press the key to switch the TV set to standby mode or press the main switch on the TV set to switch it off completely.

Adjusting the volume

You can adjust the volume with the - + key.

Adjusting picture and sound set- tings

Call the picture settings with the blue key

or the sound settings with the yellow key .

At the bottom left of the screen, you will then see the setting box with the various functions. Select the desired function with the rocker key „P+/P-“ and adjust the setting with the - + key.

5. Setting the operating mode

The TV set can be switched on at the desired ope- rating level with the keys "TV", "AV" and "R".

TV AV R These keys can also be used to switch between the operating levels.

When the TV set is switched on with one of these keys, the station which was last selected at this operating level is again set.

TV = television mode

AV = audio-visual mode for use with AV devices R = radio mode 1)

(1) available only if a SAT receiver is installed)

8

Image 8

Contents Operating instructions ForewordContents Installation Safety notes Safety notes Remote control unit Most important keys in normal useOverview of key functions Setting the operating mode You can adjust the volume with the + keyDaily operation Will select this programme positionSelecting stations Call the menu Station selection and programme posi- tion managementCall the info 7. Help function Information Using the menus Call the menu Are displayed see the picture on Left. Otherwise, page 100 appearsSee the lower picture Case of „TOP stations, youTeletext Teletext subtitles Press the red key To open the menu „Configuration AV playbackPicture quality when playing back from tape machines Copying between AV devices Individual picture settings + key to change the setting3rd line in the setting window Save the new setting as the standardPress the TV key to close the TV menu Picture settings, generalUse the cursor control key to select Picture settings for a specific Programme position Timer ConfigurationSound settings, general Setting you want to changeSelection and then, in the setting win Press the „OK key and then selectSound settings for a specific programme position Colour standard Call the menu PAL, SECAM, NTSC, NTSC44, PAL60, PAL MCall the menu Automatic zoom Childlock Call the menu Call the menu15. Childlock Reminder Call the menu Press the „TV key to close the menuTimer control Picture-Volume AV devicesTimer control Call the menu Reminder Current date ChildlockSpecial functions Picture format Calling the picture format3 functionSpecial functions Zoom Special functions Picture positionEPG NexTView Not possible with an external satellite receiverActivating the EPG NexTView Call the menu II keyCollection operation is interrupted or cancelled if Collecting NexTView dataUsing NexTView Call the menu Call the menu Using NexTView Using NexTView Call the menu Recording a programme Selection Interest Users RecordHelp function Information are then Displayed in the selected languageProgramming stations Call the menu Programming stations Press the „MENU key Executing fine tuningSelect the desired programme position Each station which transmits VPS signals also Call the menu 22. Station logoWork correctly, or if you want a different station Logo, you can overwrite the logo manuallySorting stations Call the menu Copying, shifting and deleting stationsMenü AV devices Call the menu Call the menu AV devices Initial programme position Call the menu You can define a so-called initial programmePosition in this TV set. This is intended primarily to OptionSetting the operating scope Programming the operating scope Operation without the remote control unit Changing programme positions Press the -/+ keys VolumeOr + key to adjust the volume Contrast Or + key to adjust the contrast8 W Technical data12 W Options Connecting headphones Cleaning the TV setGlossary CTIStandard settings VCRSuch as camcorders and video recorders Forced mono Switch it on again Few seconds and thenLogic video recorder as Such as a DVD play Glossary AV playback, devices with switching voltageIndex Programme guide see NexTView Errors excepted. Subject to changes Page Metz allways first class