Metz MF 72TL68, MF 82TL95 Special functions Picture format, Calling the picture format3 function

Page 30

Call the menu

F1

16:9 full picture	+
Zoom
Standard 4:3	—
Standard 4:3	+
Panorama
16:9 Vollbild	—

Panorama +

16:9 full picture

3)This menu item is available only on TV sets with a 16:9 screen.

18.Special functions Picture format

☞The function "Picture format" is available only on TV sets with the aspect ratio 16:9.

Calling the picture format3) function:

•Briefly press the F1 key to display the pop-up menu for special picture functions.

•You can use the "P+/P-" rocker key to select the various functions. You can also set the zoom factor for the selec- ted picture format within the next five seconds.

•The settings made here (except for the automatic zoom in the TV menu) remain stored until you switch to anot- her programme position or switch off the TV set.

Zoom

After selecting the "Zoom" function, you can adjust the zoom factor with the - + key.

In addition to adjusting the zoom factor, you can move the picture up or down on the screen so that, for exam- ple, the station logo or subtitles remain visible. To do this, press the F1 key and then the key and move the picture with the "P+/P-" rocker key.

Standard 4:33)

This is the standard setting for all programmes with the aspect ratio 4:3.

Panorama3)

With the Panorama function, you can adjust the picture of a programme in 4:3 aspect ratio to fill the 16:9 format of the screen (only on sets with 16:9 screen). The picture is expanded uniformly in the horizontal direction. You can also zoom the picture. The Panorama function can be switched on and off in the menu "Picture and Sound" under the heading "Picture settings, general".

16:9 full screen3)

This function is used to display the picture format of external devices (such as 16:9 video recorders) with the correct aspect ratio.

30

Image 30

Contents Operating instructions ForewordContents Installation Safety notes Safety notes Remote control unit Most important keys in normal useOverview of key functions Daily operation Setting the operating modeYou can adjust the volume with the + key Will select this programme positionSelecting stations Call the menu Station selection and programme posi- tion managementCall the info 7. Help function Information Using the menus Call the menu See the lower picture Are displayed see the picture onLeft. Otherwise, page 100 appears Case of „TOP stations, youTeletext Teletext subtitles Press the red key To open the menu „Configuration AV playbackPicture quality when playing back from tape machines Copying between AV devices 3rd line in the setting window Individual picture settings+ key to change the setting Save the new setting as the standardPicture settings, general Use the cursor control key to selectPress the TV key to close the TV menu Picture settings for a specific Programme position Timer ConfigurationSelection and then, in the setting win Sound settings, generalSetting you want to change Press the „OK key and then selectSound settings for a specific programme position Colour standard Call the menu PAL, SECAM, NTSC, NTSC44, PAL60, PAL MCall the menu Automatic zoom Childlock Call the menu Call the menu15. Childlock Reminder Call the menu Press the „TV key to close the menuTimer control Picture-Volume AV devicesTimer control Call the menu Reminder Current date ChildlockSpecial functions Picture format Calling the picture format3 functionSpecial functions Zoom Special functions Picture positionEPG NexTView Not possible with an external satellite receiverActivating the EPG NexTView Call the menu II keyCollection operation is interrupted or cancelled if Collecting NexTView dataUsing NexTView Call the menu Call the menu Using NexTView Using NexTView Call the menu Recording a programme Selection Interest Users RecordHelp function Information are then Displayed in the selected languageProgramming stations Call the menu Programming stations Executing fine tuning Select the desired programme positionPress the „MENU key Work correctly, or if you want a different station Each station which transmits VPS signals alsoCall the menu 22. Station logo Logo, you can overwrite the logo manuallySorting stations Call the menu Copying, shifting and deleting stationsMenü AV devices Call the menu Call the menu AV devices Position in this TV set. This is intended primarily to Initial programme position Call the menuYou can define a so-called initial programme OptionSetting the operating scope Programming the operating scope Or + key to adjust the volume Contrast Operation without the remote control unitChanging programme positions Press the -/+ keys Volume Or + key to adjust the contrastTechnical data 12 W8 W Options Connecting headphones Cleaning the TV setGlossary CTIStandard settings VCRSuch as camcorders and video recorders Forced mono Switch it on again Few seconds and thenLogic video recorder as Such as a DVD play AV playback, devices with switching voltage IndexGlossary Programme guide see NexTView Errors excepted. Subject to changes Page Metz allways first class