Metz MF 72TL68, MF 82TL95 manual Special functions Zoom, Special functions Picture position

Page 31

18. Special functions Zoom

The following description applies only to TV sets with a 4:3 screen.

Calling the zoom function:

•Briefly press function key „F1“

The small window "Zoom" is displayed at the bottom left corner of the screen.

•The zoom factor can now be adjusted with the - + key.

The new zoom factor is stored until it is changed again and can be recalled at any time with the „F1“ key.

-

Call the menu

F1

Zoom +

18.Special functions Picture position

☞The function "Picture position" is available only on TV sets with a 16:9 screen.

Calling the picture-position function3):

•Press and hold the function key "F1" for at least one second. The window "Special functions" appears on the screen.

• Press numeric key to open the function "Picture position"..

•Use the - + key to move the picture down or up to the desired position (e.g. so that the station logo or subtitles are visible).

☞This setting is not stored. However, you can save the picture position globally by following the instructions in Section 11.1.

Call the menu

F1

Special- functions 1

Picture format

Picture pos., vertical

3)This menu item is available only on TV sets with a 16:9 screen.

31

Image 31

Contents Operating instructions ForewordContents Installation Safety notes Safety notes Most important keys in normal use Remote control unitOverview of key functions Will select this programme position Setting the operating modeYou can adjust the volume with the + key Daily operationStation selection and programme posi- tion management Selecting stations Call the menuCall the info 7. Help function Information Using the menus Call the menu Case of „TOP stations, you Are displayed see the picture onLeft. Otherwise, page 100 appears See the lower pictureTeletext Teletext subtitles AV playback Press the red key To open the menu „ConfigurationPicture quality when playing back from tape machines Copying between AV devices Save the new setting as the standard Individual picture settings+ key to change the setting 3rd line in the setting windowUse the cursor control key to select Picture settings, generalPress the TV key to close the TV menu Timer Configuration Picture settings for a specific Programme positionPress the „OK key and then select Sound settings, generalSetting you want to change Selection and then, in the setting winSound settings for a specific programme position PAL, SECAM, NTSC, NTSC44, PAL60, PAL M Colour standard Call the menuCall the menu Automatic zoom Childlock Call the menu Call the menu15. Childlock Press the „TV key to close the menu Reminder Call the menuPicture-Volume AV devices Timer controlReminder Current date Childlock Timer control Call the menuCalling the picture format3 function Special functions Picture formatSpecial functions Picture position Special functions ZoomNot possible with an external satellite receiver EPG NexTViewII key Activating the EPG NexTView Call the menuCollecting NexTView data Collection operation is interrupted or cancelled ifUsing NexTView Call the menu Call the menu Using NexTView Selection Interest Users Record Using NexTView Call the menu Recording a programmeDisplayed in the selected language Help function Information are thenProgramming stations Call the menu Programming stations Select the desired programme position Executing fine tuningPress the „MENU key Logo, you can overwrite the logo manually Each station which transmits VPS signals alsoCall the menu 22. Station logo Work correctly, or if you want a different stationCopying, shifting and deleting stations Sorting stations Call the menuMenü AV devices Call the menu Call the menu AV devices Option Initial programme position Call the menuYou can define a so-called initial programme Position in this TV set. This is intended primarily toSetting the operating scope Programming the operating scope Or + key to adjust the contrast Operation without the remote control unitChanging programme positions Press the -/+ keys Volume Or + key to adjust the volume Contrast12 W Technical data8 W Options Cleaning the TV set Connecting headphonesCTI GlossaryVCR Standard settingsSuch as camcorders and video recorders Forced mono Few seconds and then Switch it on againLogic video recorder as Such as a DVD play Index AV playback, devices with switching voltageGlossary Programme guide see NexTView Errors excepted. Subject to changes Page Metz allways first class