Pioneer Error Message Display, MEP-7000UPDATES, Troubleshooting, Error Code, Error Type, Media

TROUBLESHOOTING

ERROR MESSAGE DISPLAY

When MEP-7000is unable to operate properly, an error code is displayed on the display panel. Check the error code displayed against the following table and take the recommended action to correct the error. If an error code other than any of the error codes listed in the table below is displayed or if the same error code is displayed even after corrective action has been taken, contact your nearest Pioneer Service Station or contact the store from which you purchased your player for assistance.

Error Code	Error Type	Media	Description	Possible cause and recommended action
E-6002	AUDIO DSP		Programs cannot be written to	Consult your dealer or the nearest Pioneer
	DOWNLOAD		the audio DPS when the power	Service Station.
	ERROR		is turned on.
E-7201	TOC READ	DVD/CD	TOC data is not being read	• If there are cracks in the disc, replace the
	ERROR		from the disc.	disc.
				• If the disc is dirty, clean the disc.
				• If the unit operates normally with other discs,
				there is a problem with the disc.
E-8301	STOP ERROR	DVD/CD	Cannot stop disc properly.	Consult your dealer or the nearest Pioneer
				Service Station.
E-8302	PLAYBACK	DVD/CD	Desired address cannot be	• If there are cracks in the disc, replace the
	ERROR		searched.	disc.
				• If the disc is dirty, clean the disc.
			Address cannot be read.
				• If the unit operates normally with other discs,
			Focus servo cannot be closed.
				there is a problem with the disc.
			Pickup cannot be moved.	Consult your dealer or the nearest Pioneer
				Service Station.
E-8303	BUFFER WRITE	DVD/CD/USB	Failed to write to music data	Consult your dealer or the nearest Pioneer
	ERROR		buffer.	Service Station.
E-8304	DECODE ERROR	DVD/CD/USB	Although the compressed	Consult your dealer or the nearest Pioneer
			music file (MP3/AAC) is in the	Service Station.
			format supported by this unit,
			a data error or decode error
			occurred.
E-8305	FORMAT ERROR	DVD/CD/USB	Although the extension of the	Exchange the disc or file to one that meets
			music file (MP3/AAC/WAV/	format specifications.
			AIFF) is correct, the
			description within the file is
			not in the supported format.
E-8306	MUSIC FILE NONE	USB	Although tracks were entered	Do not delete music files from USB storage
			in libraries (database)/playlists	devices.
			etc., at time of playback the
			tracks had been deleted from
			the USB storage device.
E-9101	LOADING	DVD/CD	A mechanical error (timeout)	If a foreign object is in the disc loading slot,
	TIMEOUT		occurred during the loading or	remove the object.
			unloading of a disc.

MEP-7000 UPDATES

Software for this unit may be updated to improve operation or functionality. For details consult the following support website: http://www.prodjnet.com/support/

68

En