USING DJ SOFTWARE
4Select [PC] on the BROWSE screen.
Once the DJ software starts, the center display’s BROWSE screen will show the computer control status, allowing the rotary selector dial, select up () and down () buttons to be used to operate the DJ software.
For DJS:
The center display will show the DJS BROWSE screen. For details of actual operation, consult the section “Selecting DJS Music Tracks” in the chapter on “Normal Style” operation of the
5Press LOAD A (or B) button.
When the LOAD A (or LOAD B) button is pressed while [PC] is selected on the BROWSE screen’s source selector, the DJ software’s track will be set in the controller corresponding to the LOAD button pressed (A or B). During DJ software operation, the controller appears highlighted in the BROWSE screen.
At the same time, the display A/B displays “PC”.
For DJS:
The display A/B displays “DJS”.
6Use the controller to operate the DJ software.
Use the various buttons, jog dial, and TEMPO adjust slider to operate the DJ software.
MEMO
•When using the accessory DJS software and certain other DJ software programs, the
•By designating the
7To switch to playback of disc or tracks on USB storage device While controller A (or B) is controlling the computer, if a track on disc or USB storage device is selected on the BROWSE screen and the LOAD A (or LOAD B) button is pressed, playback and control will switch to the selected track on disc or USB storage device.
Control using “Manipulator Style”
1Connect to the computer.
The center display will show the [PRO DJ] logo.
2Start the DJ software program.
When communication is established with the DJ software, the buttons, jog dial, and TEMPO adjust slider can be used to control operation, and the
MEMO
•Some DJ software programs do not support the aforementioned track information displays.
English
55
En