USING DJ SOFTWARE
For DJS:
Control can be performed while viewing the center display’s BROWSE, MIX, and EFFECT screens. For details of actual operation, consult the chapter on “Manipulator Style” operation of the
MEMO
•While the UTILITY screen is being displayed on the center display, the center display’s buttons and rotary selector dial cannot be used to control DJ software.
Control in “Normal Style”
1Connect to the computer.
When the USB connection with the computer is properly established, the BROWSE screen’s [PC] icon will change to active display.
2Start the DJ software program. The icon will not change.
3Designate the
In “Normal style”, designating the
4Select [PC] on the BROWSE screen.
When communication is established with the DJ software, the center display’s BROWSE screen will indicate the computer control status. While the BROWSE screen is displayed, the center display outputs MIDI messages that enable operation of the DJ software by using the rotary selector dial and select up () and down () buttons.
USING MIDI FOR COMPUTER CONTROL
MIDI (Musical Instrument Digital Interface) is a standardized protocol used to govern data transmission between electronic musical instruments and computers.
The
For more information regarding messages output by the MEP- 7000, consult the section “MIDI MESSAGE TABLE” (P. 58).
5Press LOAD A (or B) button.
When the LOAD A (or LOAD B) button is pressed, controller A (or B) MIDI messages are output, allowing use of the controller to operate the DJ software. During DJ software operation, the controller appears highlighted in the BROWSE screen.
56
En