Pioneer MEP-7000 About the LCD Screen, About OEL Organic EL Screens, About the Driver Program

TROUBLESHOOTING

Description of problem	Possible cause of problem	Recommended action
MEP-7000 isn’t detected when	• Driver software hasn’t been correctly installed in	• Install the driver correctly. If already installed, try
connected to computer	computer.	uninstalling and reinstalling it.
(normal style connections).	If the MEP-7000 is not connected properly and
	communicating with the computer, the version
	information utility will not display the firmware
	version. To check this, see P. 52 of this manual
	(“ABOUT THE DRIVER PROGRAM,
	Confirming the driver version”).
	• Control unit is connected to computer.	• In Normal Style, connect drive unit to computer.
MEP-7000 isn’t detected when	• Driver software hasn’t been correctly installed in	• Install the driver correctly. If already installed, try
connected to computer	computer.	uninstalling and reinstalling it.
(manipulator style	If the MEP-7000 is not connected properly and
connections).	communicating with the computer, the version
	information utility will not display the firmware
	version. To check this, see P. 52 of this manual
	(“ABOUT THE DRIVER PROGRAM,
	Confirming the driver version”).
	• USB auxiliary power cable not connected.	• Connect to computer in the order (1) USB
		auxiliary power cable, and (2) USB cable.
Television pictures are	• Interference caused by player.	• Turn off the power to the player or move the
distorted or noise appears in		player further away from the radio or television
FM broadcasts.		set.
Disc is not rotating even	• Disc rotation is automatically halted when no	• Press the play/pause () button to begin
though power has been turned	operation is performed for 100 minutes or longer	playback. Alternatively, press the EJECT ()
on.	when in pause mode.	button to eject the disc.

•When the last track on the disc is over the disc stops rotating.

•There may be times when MEP-7000 fails to operate properly as a result of static electricity or some other form of interference from an outside source. If any such problem occurs, turn off the power to the MEP-7000, wait for the currently inserted disc to come to a full stop, and then turn on the power again to see if that fixes the problem in question.

•This unit cannot play “partial” (unfinalized) CD-R/-RW, DVD-R/-RW, DVD+R/+RW, and DVD±R dual layer media.

•Do not attempt to play irregularly shaped or other discs besides normal 12 cm round discs, since malfunction or damage may result.

•The BPM value measured by MEP-7000 may differ from the BPM value recorded on a CD or from our DJ mixer, but this difference is a result of differences in the BPM value measurement method; not a result of a fault with the player.

English

ABOUT THE LCD SCREEN

•Some LCD monitors may display so-called “hot pixels” or “dead pixels” (constantly bright pixels or pixels that are permanently off). This is a phenomenon characteristic of LCD displays and is not considered a malfunction.

•When used in cold regions, the screen may appear dark for a while after the power is first turned on. As the unit warms up with time, the screen will return to normal brightness.

•Avoid viewing the LCD screen in direct sunlight, since the light reflected off the screen may make the image difficult to view.

ABOUT OEL (ORGANIC EL) SCREENS

• The two screens (displays A/B) may display slightly different color characteristics, but this is not a malfunction.

67

En