Pioneer MEP-7000 Troubleshooting, Description of problem, Possible cause of problem

TROUBLESHOOTING

Description of problem	Possible cause of problem	Recommended action
A large amount of noise is	• Disc is seriously warped or scratched.	• Replace with new disc.
generated when playing back a
	• Disc is unusually dusty or dirty.	• Wipe away dust or dirt from disc.
certain disc or discs. Playback
halts unexpectedly.
Track won’t load during	• LOAD LOCK is set to ON.	• Use UTILITY screen to set LOAD LOCK to OFF.
playback.
Track searching fails to halt	• Track searching sometimes takes longer than	• Hold the TIME/A.CUE button depressed for one
with Auto Cue function turned	expected when the length of silent portions	second or more to set the Auto Cue mode to
ON.	between tracks is unusually long.	OFF.
	• If the length of a silent portion between two
	tracks is longer than 10 seconds in duration, the
	second track cannot be played back unless Auto
	Cue function is turned OFF.
The jog dial performs a	• The jog mode is incorrect.	• Press the SCRATCH/JOG BREAK button to
different function from that		select the desired function.
desired.
Back cueing fails to work when	• No cueing point has been defined.	• Specify the desired cueing point. (P. 36)
the CUE button is pressed
during playback.
Unable to produce loop	• No cueing point (i.e., starting point) has been	• Specify the desired cueing point. (P. 36)
playback by pressing the OUT/	defined.
ADJUST button.
Auto cue and other setting are	• The power was turned off right after a setting	• Wait 10 seconds before turning off the power
not stored.	was made.	after a change.
Can’t store cue/lop point data	• Insufficient space on USB storage device.	• Delete unnecessary files or other make
for tracks on USB storage		sufficient space on USB storage device.
device.
Recorded USB storage device	• USB storage device was disconnected before	• Always perform proper dismount procedure
cue and loop points aren’t	performing proper dismount procedure, or	before disconnecting USB storage device or
displayed.	power was turned off.	turning off power.
Playlist tracks appear grayed	• The disc or USB storage device for the recorded	• Load or connect the disc or USB storage device
out.	tracks is not loaded/connected.	for the recorded tracks.
	• The recorded tracks have been deleted from the	• Once again record the changed file names or
	USB storage device.	changed locations in the playlist.
	• The file names for the recorded tracks have been
	changed, or the files moved.
	• USB storage device was disconnected before	• Always perform proper dismount procedure
	performing proper dismount procedure, or	before disconnecting USB storage device or
	power was turned off.	turning off power.
Can’t record tracks located on	• Insufficient space on USB storage device.	• Delete unnecessary files or other make
USB storage device on playlist.		sufficient space on USB storage device.
Keyboard input isn’t correct.	• KEYBOARD LANGUAGE setting is incorrect.	• Use UTILITY screen’s KEYBOARD LANGUAGE
		setting to select the proper input language.
	• You are using a keyboard for a language other	• Use a keyboard for one of the supported
	than the ten supported by this unit.	languages.
Character data for MP3, AAC	• LANGUAGE setting is incorrect	• Go to the UTILITY screen and set LANGUAGE to
format tracks appears garbled.		the language of your choice.
	• The track information for the music file created	• Input the file information in a language
	in the DJ software is in a language not	supported by this unit. This unit is able to display
	supported by this unit.	European languages, Russian, simplified
		Chinese and Japanese.
	• The track information for this unit is in a	• For information on the languages supported by
	language not supported by the DJ software.	your DJ software, check the instruction manual
		for the software you are using.
Tracks contained in m3u files	• m3u file is not recorded correctly.	• Confirm correct recording format for m3u file.
won’t load.

66

En