Pioneer MEP-7000 Normal Style Connections, Control unit, Drive unit, Accessory, control cord

CONNECTIONS

CONNECTIONS

Whenever connecting or disconnecting components, be sure to first turn off the power and disconnect the power cord from its outlet first. Damage to the unit may result if connections are modified while power is supplied.

NORMAL STYLE CONNECTIONS

1. System connections

Use the provided dedicated remote control cable to connect the control unit to the drive unit. Insert firmly until you hear a click.

Control unit

PC
5V
MONITOR OUT	REMOTE
	CONTROL

Drive unit

REMOTE

CONTROL

AC IN				B	A
				AUDIO OUT	AUDIO OUT
		DIGITAL OUT		L	L	REMOTE
PC	USB1	B	A			CONTROL
				R	R

Accessory dedicated remote control cable

CONTROLCONTROL

2. Connections to DJ mixer (DJM-3000/DJM-800) (audio output and control connections)

Using the accessory audio cable, connect the white plug to the L (left) channel connector and the red plug to the R (right) channel connector. By connecting the accessory control cord, this unit can be controlled from a Pioneer DJ-mixer so as to allow fader start play and back cue operations (except during relay play).

Accessory	Accessory audio cable
control cord

Accessory control cord

DJM-3000

Accessory audio cable

Drive unit

MEMO

•When connecting to the DJM-300, DJM-500 or DJM-600, use the accessory audio cable to connect the CD1 to the drive unit’s side A output connectors, and CD2 to the drive unit’s side B output connectors as shown in the accompanying illustration.

16

En