Pioneer MEP-7000 Connections, English, Connecting other components, Control unit

CONNECTIONS

3. Connection to external monitor (pin-jack connector)

Use these connections when you wish to output the center display images to a large screen, or when using CD-G Karaoke. After connecting this unit to the external monitor, the unit’s settings must be changed (see the item “MONITOR OUT” in the topic “[1] DISPLAY” under the section “USING THE UTILITY” on P. 61.

Control unit

PC
5V
MONITOR OUT	REMOTE
	CONTROL

External monitor

4. Connecting other components

A.Connecting another mixer

Connect this unit’s AUDIO OUT connectors to the mixer’s LINE IN or AUX connectors. (Do not connect to PHONO connectors, since sound will be distorted and proper playback will not be produced.)

B.Connecting a stereo amplifier (when not using DJ mixer)

Connect to CD or AUX IN connectors

(do not connect to PHONO connectors).

English

Accessory audio cable

C. Connecting a component with digital input connectors

CD recorder, amplifier with digital inputs, etc.

Digital signal cable

Drive unit

Drive unit

MEMO

•The digital output connectors produce only audio data without the inclusion of subcodes.

•Depending on the CD recorder or other component, certain features, including CD recording, may be restricted. For details, consult the operating instructions for the connected component.

17

En