Kreisen KR-270T owner manual Control Device Setup

15. Balance (Command2 : j)

GTo adjust balance.

You can also adjust balance in the SOUND menu.

Transmission

[k][j][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64

•Refer to ‘Real data mapping 1’. See page 37.

Acknowledgement

[j][ ][Set ID][ ][OK][Data][x]

*Real data mapping 1

0 : Step 0

A : Step 10 (SET ID 10)

F: Step 15 (SET ID 15)

10 : Step 16 (SET ID 16)

64 : Step 100

* Real data mapping 2

0: -10

5: -9 A : -8

2D: -1

32 : 0

37 : +1

5F : +9

64 : +10

External EN

16. Colour Temperature (Command2 : u)

GTo adjust colour temperature.

You can also adjust CSM in the PICTURE menu.

Transmission

[k][u][ ][Set ID][ ][Data][Cr]

Data 0: Cool 1: Normal 2: Warm

Acknowledgement

[u][ ][Set ID][ ][OK][Data][x]

17. PIP Input Select (Command2 : y)

GTo select input source for sub picture in PIP/Twin picture mode.

Transmission

[k][y][ ][Set ID][ ][Data][Cr]

Data 0	: TV	3	: S-Video
1	: AV1	4	: Component(480i)
2	: AV2

Acknowledgement

[y][ ][Set ID][ ][OK][Data][x]

*In Component 480i for main picture, you can select RGB and DVi for sub picture.

18. SSM (Command2 : h)

GTo select sound mode.

Transmission

[k][h][ ][Set ID][			][Data][Cr]
Data	1	: Flat	4	: Music
	2	: Speech	5	: User
	3	: Movie
Acknowledgement
[h][	][Set ID][ ][OK][Data][x]

19. AVL (Command2 : k)

GTo keeps on an equal volume level even if you change programmes.

Transmission

[k][k][ ][Set ID][ ][Data][Cr]

Data 0: Off 1: On

Acknowledgement

[k][ ][Set ID][ ][OK][Data][x]

Control Device Setup

37