Panasonic AJ-HD150FE Time Code in connector, Time Code OUT connector, CUE in connector

Page 17

Controls and their functions

<Connector area>

5TIME CODE IN connector

This is the connector for recording the external time code on the tape.

6TIME CODE OUT connector

The playback time code is output from this connector during playback.

During recording, the time code generated by the internal time code generator is output.

7CUE IN connector

The analogue signal to be recorded on the CUE track is supplied to this connector. The audio signals from a microphone can also be recorded by selecting the –60dB input mode on the setup menu No. 705 (CUE IN LV).

8CUE OUT connector

The analogue signal recorded on the CUE track is output from this connector.

9MONITOR OUT connector

During playback, the playback signals from the CUE track or PCM audio signal CH1, CH2, CH3, CH4, CH5, CH6, CH7 and CH8 are output from this connector.

:ANALOG AUDIO IN connectors

These are the input connectors for the analogue audio signals (CH1, CH2, CH3, CH4).

;ANALOG AUDIO OUT connectors

These are the output connectors for the analogue audio signals (CH1, CH2, CH3, CH4).

<HD SERIAL DIGITAL COMPONENT AUDIO VIDEO IN/OUT connectors

These are the input and output connectors for the HD digital component audio and video signals that comply with the SMPTE 292M standard.

The TC, menu or other information is output from the HD SDI OUT3 connector with the information superimposed onto the signals.

=SD SERIAL DIGITAL COMPONENT AUDIO VIDEO OUT connectors

These are the output connectors for the digital component audio and video signals that comply with the SMPTE 259M-C, 272M and 294M standards.

The signals are output during the playback of compatible DVCPRO25M, 50M, DV or DVCAM format tapes or during down-conversion output (optional accessory).

The TC, menu or other information is output from the SD SDI OUT3 connector with the information superimposed onto the signals.

>ANALOG COMPOSITE VIDEO OUT connectors

These are the output connectors for the analogue composite video signals.

The signals are output during the playback of compatible DVCPRO25M, 50M, DV or DVCAM format tapes or during down-conversion output (optional accessory).

Video signals with information superimposed onto them can be output from the VIDEO OUT3 connector.

Whether information is to be superimposed or not (ON/OFF) is selected by setting the setup menu No.005 (SUPER) item.

The VIDEO OUT2 connector can also be used as the WFM (waveform) OUT connector.

TC, CTL, VIDEO, RF L/R and ENV L/R are the signals which can be selected on the menu.

– 17 –

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Digital HD Video Cassette Recorder Operating InstructionsANY 13 AMP Socket For your safetyHow to replace the fuse Operating precaution Contents Features General and FeaturesTime codes Menu-driven setupMulti-functional interfaces Channel high-sound-quality digital audioFront panel Controls and their functionsFront Panel Top Section Front Panel Centre Section TC/UB switch TC/CTL switchINT/EXT switch TAPE/EE switch Stop modeSHTL/SLOW switch REMOTE/LOCAL switchJog mode Remote lampAuto Edit button Preroll buttonPREVIEW/REVIEW buttons A IN/SET/OUT a OUT buttonsCassette inserted display lamp Counter display areaDvcpro format 25 Mbps/50 Mbps cassette play display lamp SCH lampVolume control Headphones jackMonitor Select switches ` Metre FULL/FINE selector switchSET button Front Panel Bottom SectionDiag button Indicated on the Warning screen are the warningPower mains socket Connector areaSignal GND terminal Fuse holderTime Code OUT connector Time Code in connectorCUE in connector CUE OUT connectorHD REF OUT connector ? SD REF in connectors and 75-ohm termination switchSD REF OUT connector Digital Audio IN/OUT connectorRegistration method Operations using the front panel bottom controlsItems which can be registered When registering VTR statuses When registering setup menu itemsExample of the menu displayed for registering VTR statuses Press itAre reset to the factory settings Cancel buttonCancel button This is for cancelling the reset operation Prog Menu 1 to 4 buttonsRegistered menu item displays Operations using the front panel top controlsVTR status displays Cancelling the change How to change a registered menu settingEntering the setting Menu item VTR status item tableName of registration Description of display Composite Video OUT3 Set the Control switch on the front panel to LocalConnections Tapes Cassette Switching on the power/inserting the cassetteLights and the tape stops travelling STOP/STAND by modeStill Timer Setting 2Adjusting the audio level 1Selecting video/audio input signalsRecording Level controls Pushed in unity valuePlayback Jog/shuttle Jog mode Shuttle modeManual editing Select the editing modeSelect the editing channel For insert editingPreroll Deck to deck Automatic editingWhen the unit is used as the recorder Switch settings and adjustmentsWhen the unit is used as the player Set the Power switch to onSelecting the editing mode Negative duration function Entering the edit pointsMatch frame processing function Calculating the duration Checking the edit pointsModifying the edit points 1Resetting both the edit in and OUT points2Resetting either the edit in or OUT point Preview Postroll Executing automatic editingRetry function Auto tag editingReview Entering the edit points Audio split editingDeleting the edit points Modifying the edit pointsCueing up the tape to the edit points Displaying the audio split edit pointsDuration display OperationsExpansion mode selection status Expansion mode execution using the MODE/SEL buttonNormal mode Expansion mode selection statusMulti CUE function Selecting the Multi CUE modeEditing channels Registering the cue pointsSearch display Display mode selection mark Mode displayDescription of displays OperationsSearch point operations Search point and registration point operationsExample of LED display ¢ 1 onRegistering cue points Operations on the same selected page page Mode = Manu# CUE # CUE 7 # CUE¢¢ appears as the registration pointer display Resetting the registration points individually When registering cue points using numbersDeleting registered points Search operationsIC Card function IC Card mode selectionOutline IC CardDisplayed during the period of execution Description of DisplayExecute status Display 3 4 Description of OperationFile selection F O M aVariable memory mode selection Variable memory playback operation procedureVariable memory function Variable memory functionVariable memory editing operation procedure Error LOG mode selection Error LOG functionSetup menu No.015 Auto Step Description of MenuDescription of Operations Operation mode displayAre displayed Time code displayChanging the settings Setup default settingsSearch dial should be used in jog mode if at all possible SETUP-MENU Init SET YESPLAY/NOSTOPChanging the file Setup menusSystem User Each user file contains the following itemsPress the Menu button Setting and releasing the lock modeLoading a user file Settings can be lockedTurn the search dial and move the cursor Except No. A00 Load and No. A01 SaveSaving a user file Automatic loading of user file when the power is turned onVideo output signal adjustments Setting DescriptionControl matrix of the adjustments is shown below System menuSYS SC SYS HVO SYS SDI SYS0100 + The audio output phase is delayed from the video output0200 100 MenuBasic User menuYMD DisplayMDY DMYSYS Format Format in tape playbackManual Manual DvcamInput OUT REFHdref SdrefOperation Memory stop function SOF&EJ FRZ ModeREC INH LampMode Rota ModeInterface Master Local 50PIN/OUT PortEdit SettingJOG REV JOG FWDPostroll EditRplcec RPLCE4CH1+CH2 Tape Protect Time Code Vaux video auxiliary data area SBC sub code data areaVideo Video OUT ENHHD SDI OUT SD SDI OUT Video OUT ADD21L ADD22LADD20L AUT OLine Audio AES DigiCH6 CH5CH7 CH8Fade CH1 CUEAUD MIX LLinear AUTO11 Moni CHMON Auto Moni SELAUD VR REC PTMenu Time code Time code/user bitUser bit Alone. In addition,Recording internal/external time codes Setting the internal time codeSetting the external time code TC switch Reproducing the time code/user bit Place the unit in the stop mode Set the TC/CTL button to TCSuperimpose screen Operation modeCharacters displayed Display positionAudio recording channel and monitor output selection Recording track Recording signalAudio recording channel Monitor output channelRack-mounting adapters Rack mountingCondensation Video head cleaningMaintenance Diag menu Error messagesDisplaying the Diag menu This display the VTR informationItem No Description Displaying the Hours Meter informationPriority Display Description Priority Monitor displayCounter display Monitor display Table of Auto OFF Error messagesStop EjectIf the supply reel motor should rotate at an abnormally ForIf an abnormal torque applied to the supply reel motor Is detected or if an abnormal current flowing toExternal interface specifications Hardware specificationsRS-232C interface IntroductionOutline of send procedure from controller Software specificationsProtocol Communication parametresWhen the communication has terminated abnormally Nack Error code tableReturn format VTR ACKCommands relating to operation control Notes Command tableSupplementary notes Operation MessageReverse STX OSR ETXStandby STX OBF ETX OFF Standby STX OBN ETXOperation Commands relating to inquiries NotesSend command CLS Microsoft QuickBASIC sample programmePin No. Signal Connector signalsPin No Signal Signal Pin NoPin No SignalRS-232C Remote 25-pin D-SUB crossover cable supported F1 board Printed circuit boardAudio Input This sets the CH1 audio input Impedance SWVideo input connector SpecificationsVideo Output Connector YESAudio Output Connector Audio Input ConnectorDigital Audio Cue TrackHagenauer Str , 65203 Wiesbaden-Biebrich Deutschland Tel Panasonic Broadcast EuropePanasonic Broadcast Europe GmbH
Top Page Image Contents