Panasonic AJ-HD150FE Error LOG function, Description of Menu, Error LOG mode selection

Page 58

ERROR LOG function

ERROR LOG mode selection

In <Expansion mode selection> status with MODE/SEL button		g pressed, ERROR LOG mode can be
selected.
When EXIT button	h is pressed, ERROR LOG mode is cancelled and changed to normal mode.

Outline

In case the following warning message is given during tape running, the time code and operation mode

as well as the warning message will be stored, which can be read in the form of a list at VTR status

display	3.
It is possible to store up to 99 warnings. Also, in case of more than 99 warnings, it will be processed
according to the setting of setup menu No. 015 (AUTO STEP).

Warning message to be stored		Description

NO RF		Blank portion of tape was detected more than 1 sec. (Normal playback
		mode)

SV NOT LOCKED		Servo was unlocked for over 3 sec. (Record/Normal playback/Edit mode)

LOW RF		Envelop level detected was about 1/3 of the normal level for over 1 sec.
		(Record/Normal playback/Edit mode)

HIGH ERROR RATE		Error rate worsened, and video or audio playback signal was subjected to
		correction/calibration. (Normal playback mode)

<Description of Menu>

Setup menu No.015 (AUTO STEP)

(Default setting is OFF)

In ERROR LOG function, warning can be stored up to 99 messages. If it exceeds the capacity, processing mode will be selected for storage.

OFF: Upper limit is 99 messages. Warning messages generated after that are not stored.

ON : 99 messages are stored. Warning messages given after that are stored in the place of 99th message. Warning messages already stored are then shifted down in the direction of smaller numbers in order.

• The image of storage with it set to ON is illustrated below.

Store No.	Warning stored

1/99	Warning 1

2/99	Warning 2

:	:
:	:

99/99	Warning 99

Stored up to 99

messages, and

100th message was given.

Store No.	Warning stored

1/99	Warning 2

2/99	Warning 3

:	:
:	:

99/99	Warning 100

– 58 –

Image 58

Contents Operating Instructions Digital HD Video Cassette RecorderHow to replace the fuse For your safetyANY 13 AMP Socket Operating precaution Contents General and Features FeaturesMulti-functional interfaces Menu-driven setupTime codes Channel high-sound-quality digital audioControls and their functions Front panelFront Panel Top Section Front Panel Centre Section INT/EXT switch TC/CTL switchTC/UB switch TAPE/EE switch Stop modeJog mode REMOTE/LOCAL switchSHTL/SLOW switch Remote lampPREVIEW/REVIEW buttons Preroll buttonAuto Edit button A IN/SET/OUT a OUT buttonsDvcpro format 25 Mbps/50 Mbps cassette play display lamp Counter display areaCassette inserted display lamp SCH lampMonitor Select switches Headphones jackVolume control ` Metre FULL/FINE selector switchDiag button Front Panel Bottom SectionSET button Indicated on the Warning screen are the warningSignal GND terminal Connector areaPower mains socket Fuse holderCUE in connector Time Code in connectorTime Code OUT connector CUE OUT connectorSD REF OUT connector ? SD REF in connectors and 75-ohm termination switchHD REF OUT connector Digital Audio IN/OUT connectorItems which can be registered Operations using the front panel bottom controlsRegistration method Example of the menu displayed for registering VTR statuses When registering setup menu itemsWhen registering VTR statuses Press itCancel button This is for cancelling the reset operation Cancel buttonAre reset to the factory settings Prog Menu 1 to 4 buttonsVTR status displays Operations using the front panel top controlsRegistered menu item displays Entering the setting How to change a registered menu settingCancelling the change Name of registration VTR status item tableMenu item Description of display Connections Set the Control switch on the front panel to LocalComposite Video OUT3 Tapes Switching on the power/inserting the cassette CassetteStill Timer Setting STOP/STAND by modeLights and the tape stops travelling Recording 1Selecting video/audio input signals2Adjusting the audio level Level controls Pushed in unity valuePlayback Jog mode Shuttle mode Jog/shuttleSelect the editing channel Select the editing modeManual editing For insert editingPreroll Automatic editing Deck to deckWhen the unit is used as the player Switch settings and adjustmentsWhen the unit is used as the recorder Set the Power switch to onSelecting the editing mode Match frame processing function Entering the edit pointsNegative duration function Checking the edit points Calculating the duration2Resetting either the edit in or OUT point 1Resetting both the edit in and OUT pointsModifying the edit points Preview Retry function Executing automatic editingPostroll Auto tag editingReview Deleting the edit points Audio split editingEntering the edit points Modifying the edit pointsDuration display Displaying the audio split edit pointsCueing up the tape to the edit points OperationsNormal mode Expansion mode execution using the MODE/SEL buttonExpansion mode selection status Expansion mode selection statusEditing channels Selecting the Multi CUE modeMulti CUE function Registering the cue pointsDescription of displays Mode displaySearch display Display mode selection mark OperationsExample of LED display Search point and registration point operationsSearch point operations ¢ 1 on# CUE Operations on the same selected page page Mode = ManuRegistering cue points # CUE 7 # CUE¢¢ appears as the registration pointer display Deleting registered points When registering cue points using numbersResetting the registration points individually Search operationsOutline IC Card mode selectionIC Card function IC CardExecute status Display Description of DisplayDisplayed during the period of execution File selection Description of Operation3 4 F O M aVariable memory function Variable memory playback operation procedureVariable memory mode selection Variable memory functionVariable memory editing operation procedure Setup menu No.015 Auto Step Error LOG functionError LOG mode selection Description of MenuAre displayed Operation mode displayDescription of Operations Time code displaySearch dial should be used in jog mode if at all possible Setup default settingsChanging the settings SETUP-MENU Init SET YESPLAY/NOSTOPSystem User Setup menusChanging the file Each user file contains the following itemsSetting and releasing the lock mode Press the Menu buttonTurn the search dial and move the cursor Settings can be lockedLoading a user file Except No. A00 Load and No. A01 SaveAutomatic loading of user file when the power is turned on Saving a user fileControl matrix of the adjustments is shown below Setting DescriptionVideo output signal adjustments System menuVO SYS SYS HSYS SC SDI SYS0200 100 + The audio output phase is delayed from the video output0100 MenuUser menu BasicMDY DisplayYMD DMYManual Format in tape playbackSYS Format Manual DvcamHdref OUT REFInput SdrefOperation Memory stop function REC INH FRZ ModeSOF&EJ LampRota Mode ModeInterface IN/OUT Local 50PMaster PortSetting EditPostroll JOG FWDJOG REV EditCH1+CH2 RPLCE4Rplcec Tape Protect Time Code SBC sub code data area Vaux video auxiliary data areaVideo HD SDI OUT ENHVideo OUT SD SDI OUT Video OUT ADD20L ADD22LADD21L AUT OLine Audio Digi AESCH7 CH5CH6 CH8AUD CH1 CUEFade MIX LLinear MON Auto Moni CHAUTO11 Moni SELREC PT AUD VRMenu User bit Time code/user bitTime code Alone. In addition,Setting the external time code TC switch Setting the internal time codeRecording internal/external time codes Place the unit in the stop mode Set the TC/CTL button to TC Reproducing the time code/user bitCharacters displayed Operation modeSuperimpose screen Display positionAudio recording channel Recording track Recording signalAudio recording channel and monitor output selection Monitor output channelRack mounting Rack-mounting adaptersMaintenance Video head cleaningCondensation Displaying the Diag menu Error messagesDiag menu This display the VTR informationPriority Display Description Displaying the Hours Meter informationItem No Description Priority Monitor displayStop Table of Auto OFF Error messagesCounter display Monitor display EjectIf an abnormal torque applied to the supply reel motor ForIf the supply reel motor should rotate at an abnormally Is detected or if an abnormal current flowing toRS-232C interface Hardware specificationsExternal interface specifications IntroductionProtocol Software specificationsOutline of send procedure from controller Communication parametresReturn format VTR Error code tableWhen the communication has terminated abnormally Nack ACKSupplementary notes Command tableCommands relating to operation control Notes Operation MessageStandby STX OBF ETX STX OSR ETXReverse OFF Standby STX OBN ETXSend command Commands relating to inquiries NotesOperation Microsoft QuickBASIC sample programme CLSPin No Signal Connector signalsPin No. Signal Signal Pin NoRS-232C Remote 25-pin D-SUB crossover cable supported SignalPin No Audio Input This sets the CH1 audio input Printed circuit boardF1 board Impedance SWVideo Output Connector SpecificationsVideo input connector YESDigital Audio Audio Input ConnectorAudio Output Connector Cue TrackPanasonic Broadcast Europe GmbH Panasonic Broadcast EuropeHagenauer Str , 65203 Wiesbaden-Biebrich Deutschland Tel