Panasonic AJ-HD150FE ? SD REF in connectors and 75-ohm termination switch, HD REF OUT connector

Page 18

Controls and their functions

<Connector area>

?SD REF IN connectors and 75-ohm termination switch

These are the input connectors for the SD reference video signals. Input the NTSC signals with colour burst.

To terminate, set the switch to ON.

@HD REF IN connectors and 75-ohm termination switch This is the input connectors for the HD reference video signals. Input tri-level sync signals with positive and negative polarities. To terminate, set the switch to ON.

AHD REF OUT connector

This is the output connector for the HD reference video signals used for external synchronization.

It outputs tri-level sync signals with positive and negative polarities.

The field frequency is synchronized with the input signals. (If no signals are input, the frequency follows the menu setting.)

BSD REF OUT connector

This is the output connector for the NTSC external synchronization signal (black burst signal).

CDIGITAL AUDIO IN/OUT connector

This I/O connector is for digital audio signals which comply with the AES/EBU standard.

DRemote control connectors

The unit can be controlled from an external source by connecting the unit with another unit or an external controller.

There are two remote control connectors, one for IN/OUT uses and the other for OUT uses.

IN/OUT: For connection with an external controller. For connection with deck-to-deck operation.

OUT: For connection with parallel running operations. For use in a loop-through configuration.

EENCODER REMOTE connector

The external encoder/controller is hooked up to this connector when the video output signal and other settings are to be adjusted from an external source.

FRS-232C connector

GPARALLEL REMOTE connector

This is used when operating the unit from an external source.

– 18 –

Image 18

Contents Operating Instructions Digital HD Video Cassette RecorderFor your safety How to replace the fuseANY 13 AMP Socket Operating precaution Contents General and Features FeaturesMulti-functional interfaces Menu-driven setupTime codes Channel high-sound-quality digital audioControls and their functions Front panelFront Panel Top Section Front Panel Centre Section INT/EXT switch TC/CTL switchTC/UB switch TAPE/EE switch Stop modeJog mode REMOTE/LOCAL switchSHTL/SLOW switch Remote lampPREVIEW/REVIEW buttons Preroll buttonAuto Edit button A IN/SET/OUT a OUT buttonsDvcpro format 25 Mbps/50 Mbps cassette play display lamp Counter display areaCassette inserted display lamp SCH lampMonitor Select switches Headphones jackVolume control ` Metre FULL/FINE selector switchDiag button Front Panel Bottom SectionSET button Indicated on the Warning screen are the warningSignal GND terminal Connector areaPower mains socket Fuse holderCUE in connector Time Code in connectorTime Code OUT connector CUE OUT connectorSD REF OUT connector ? SD REF in connectors and 75-ohm termination switchHD REF OUT connector Digital Audio IN/OUT connectorOperations using the front panel bottom controls Items which can be registeredRegistration method Example of the menu displayed for registering VTR statuses When registering setup menu itemsWhen registering VTR statuses Press itCancel button This is for cancelling the reset operation Cancel buttonAre reset to the factory settings Prog Menu 1 to 4 buttonsOperations using the front panel top controls VTR status displaysRegistered menu item displays How to change a registered menu setting Entering the settingCancelling the change VTR status item table Name of registrationMenu item Description of display Set the Control switch on the front panel to Local ConnectionsComposite Video OUT3 Tapes Switching on the power/inserting the cassette CassetteSTOP/STAND by mode Still Timer SettingLights and the tape stops travelling Recording 1Selecting video/audio input signals2Adjusting the audio level Level controls Pushed in unity valuePlayback Jog mode Shuttle mode Jog/shuttleSelect the editing channel Select the editing modeManual editing For insert editingPreroll Automatic editing Deck to deckWhen the unit is used as the player Switch settings and adjustmentsWhen the unit is used as the recorder Set the Power switch to onSelecting the editing mode Entering the edit points Match frame processing functionNegative duration function Checking the edit points Calculating the duration1Resetting both the edit in and OUT points 2Resetting either the edit in or OUT pointModifying the edit points Preview Retry function Executing automatic editingPostroll Auto tag editingReview Deleting the edit points Audio split editingEntering the edit points Modifying the edit pointsDuration display Displaying the audio split edit pointsCueing up the tape to the edit points OperationsNormal mode Expansion mode execution using the MODE/SEL buttonExpansion mode selection status Expansion mode selection statusEditing channels Selecting the Multi CUE modeMulti CUE function Registering the cue pointsDescription of displays Mode displaySearch display Display mode selection mark OperationsExample of LED display Search point and registration point operationsSearch point operations ¢ 1 on# CUE Operations on the same selected page page Mode = ManuRegistering cue points # CUE 7 # CUE¢¢ appears as the registration pointer display Deleting registered points When registering cue points using numbersResetting the registration points individually Search operationsOutline IC Card mode selectionIC Card function IC CardDescription of Display Execute status DisplayDisplayed during the period of execution File selection Description of Operation3 4 F O M aVariable memory function Variable memory playback operation procedureVariable memory mode selection Variable memory functionVariable memory editing operation procedure Setup menu No.015 Auto Step Error LOG functionError LOG mode selection Description of MenuAre displayed Operation mode displayDescription of Operations Time code displaySearch dial should be used in jog mode if at all possible Setup default settingsChanging the settings SETUP-MENU Init SET YESPLAY/NOSTOPSystem User Setup menusChanging the file Each user file contains the following itemsSetting and releasing the lock mode Press the Menu buttonTurn the search dial and move the cursor Settings can be lockedLoading a user file Except No. A00 Load and No. A01 SaveAutomatic loading of user file when the power is turned on Saving a user fileControl matrix of the adjustments is shown below Setting DescriptionVideo output signal adjustments System menuVO SYS SYS HSYS SC SDI SYS0200 100 + The audio output phase is delayed from the video output0100 MenuUser menu BasicMDY DisplayYMD DMYManual Format in tape playbackSYS Format Manual DvcamHdref OUT REFInput SdrefOperation Memory stop function REC INH FRZ ModeSOF&EJ LampRota Mode ModeInterface IN/OUT Local 50PMaster PortSetting EditPostroll JOG FWDJOG REV EditRPLCE4 CH1+CH2Rplcec Tape Protect Time Code SBC sub code data area Vaux video auxiliary data areaVideo ENH HD SDI OUTVideo OUT SD SDI OUT Video OUT ADD20L ADD22LADD21L AUT OLine Audio Digi AESCH7 CH5CH6 CH8AUD CH1 CUEFade MIX LLinear MON Auto Moni CHAUTO11 Moni SELREC PT AUD VRMenu User bit Time code/user bitTime code Alone. In addition,Setting the internal time code Setting the external time code TC switchRecording internal/external time codes Place the unit in the stop mode Set the TC/CTL button to TC Reproducing the time code/user bitCharacters displayed Operation modeSuperimpose screen Display positionAudio recording channel Recording track Recording signalAudio recording channel and monitor output selection Monitor output channelRack mounting Rack-mounting adaptersVideo head cleaning MaintenanceCondensation Displaying the Diag menu Error messagesDiag menu This display the VTR informationPriority Display Description Displaying the Hours Meter informationItem No Description Priority Monitor displayStop Table of Auto OFF Error messagesCounter display Monitor display EjectIf an abnormal torque applied to the supply reel motor ForIf the supply reel motor should rotate at an abnormally Is detected or if an abnormal current flowing toRS-232C interface Hardware specificationsExternal interface specifications IntroductionProtocol Software specificationsOutline of send procedure from controller Communication parametresReturn format VTR Error code tableWhen the communication has terminated abnormally Nack ACKSupplementary notes Command tableCommands relating to operation control Notes Operation MessageStandby STX OBF ETX STX OSR ETXReverse OFF Standby STX OBN ETXCommands relating to inquiries Notes Send commandOperation Microsoft QuickBASIC sample programme CLSPin No Signal Connector signalsPin No. Signal Signal Pin NoSignal RS-232C Remote 25-pin D-SUB crossover cable supportedPin No Audio Input This sets the CH1 audio input Printed circuit boardF1 board Impedance SWVideo Output Connector SpecificationsVideo input connector YESDigital Audio Audio Input ConnectorAudio Output Connector Cue TrackPanasonic Broadcast Europe Panasonic Broadcast Europe GmbHHagenauer Str , 65203 Wiesbaden-Biebrich Deutschland Tel