Panasonic AJ-HD150FE operating instructions VTR status item table, Name of registration, Menu item

Operations using the front panel top controls

VTR status item table

Name of registration			Item as it	ap-
			pears on VTR					Description of display
	menu item
			status display
000		REC FORMAT	REC FMT		This indicates the recording format.
					1080i:		The tape is recorded using the 1080i format.
					720p:		The tape is recorded using the 720p format.
001		REF OUT	REFOUT		This displays the output reference status.
					HD_59:		The HD REF input signal has been selected as
							the reference. The field frequency is 59.94 Hz.
					HD_60:		The HD REF input signal has been selected as
							the reference. The field frequency is 60 Hz.
					IN_59:		The	HD serial	input signal	has been selected
							as the reference. The field frequency is 59.94
							Hz.
					IN_60:		The	HD serial input signal has been			selected
							as the reference. The field frequency is 60 Hz.
					INT59:		The signal from the internal generator (59.94
							Hz) is selected as the reference.
					INT60:		The signal from the internal generator (60 Hz)
							is selected as the reference.
					INTSC59: The SD REF input signal has been selected as
							the reference. The field frequency is 59.94 Hz.
					INT59N: SD REF has been selected by the OUT REF
							setting. Since the SD REF signal is not input,
							the signal from the internal generator (59.94
							Hz) is used.
002		PB FLD RATE	PB_FLD		This indicates		the field frequency at which the recording
					was made on the tape as ascertained from the tape’s
					playback signals.
					59.94:		The tape has been recorded at				a field fre-
							quency of 59.94 Hz.
					60:		The tape has been recorded with at a field fre-
							quency of 60 Hz.
003		REC FLD	RECFLD		This indicates		the field frequency at which the recording
		RATE			is to be made on the tape.
					59.94:		The recording will be made on the tape at a
							field frequency of 59.94 Hz.
					60:		The recording will be made on the tape at a
							field frequency of 60 Hz.
004		HD OUT	HD_OUT		This indicates the format of the HD serial output.
					1080i:		The HD serial output uses the 1080i format.
					720P:		The HD serial output uses the 720p format.
					NONE:	Output is		in a state of mute according to			the
							setting of the setup menu No. 626 - No. 630.
005		SD OUT	SD_OUT		This indicates the format of the SD output.
					480i:		The SD output is in the 480i format.
					480P:		The SD output is in the 480p format.
					NONE:	Output is		in a state of mute according to			the
							setting of the setup menu No. 626 - No. 630.
006		UFC	UFC		This indicates		the status of HD-SD format converter
					board (AJ-UDC150AP, sold separately).
					LN_CON: The line converter is operating.
					UP_CON: The up-converter is operating.
					DW_CON:		The down-converter is operating.
					NONE:	HD-SD		format	converter	board	(AJ-
							UDC150AP, sold separately) is not installed.

– 24 –