Panasonic NV-FJ760 manual Setting, Connecting

VCR display

Preset Download Function

The Preset Download function automatically copies the tuning position of all available TV stations into the VCR’s memory when you connect the VCR using a fully-wired 21-pin Scart cable to a TV equipped with the Q Link function.

To Simultaneously Set Up this VCR with a New TV

Perform the following operation steps exactly as described to ensure that the Preset Download function works correctly.

√First of all, make sure that the VCR is switched off.

1Switch the TV on.

The TV starts to tune all available TV stations and to adjust the clock.

(This is called Auto Setup function.)

Hints:
≥ If you use a Panasonic TV and perform the operation step
1, starting the downloading of the setup data will
automatically display the “Download” indication. However, in
case of a TV of another make, the “Download” indication
may not appear. In this case, select the AV input on your TV
if you want to see the “Download” indication.
≥ If you select “Schweiz”, “Suisse” or “Svizzera” on the
Country setting menu, the Display setting menu appears	Up
automatically to let you set the item “Power save” to “ON”. In
this setting, the VCR’s power consumption is minimised
	Setting
when it is off (Standby mode).To turn the VCR on, keep the
VCR-ON/OFF button 1 pressed on the VCR main unit. It is
not possible to turn it on with the remote control.
To Set Up this VCR with a TV Already in
	and
Use
1 Switch the TV on.

√ When the TV has finished its

own auto setup, the VCR is

automatically switched on, and

the downloading of the setup

data from the TV to the VCR

starts. (Applicable to TVs with

“Q Link” or “DATA LOGIC”

function)

If your TV is equipped with the

“Easy Link”, “Megalogic” or

“SMARTLINK” function, the

On Screen Display

Download

Download in

progress,

please wait.

Position 67

Indication during downloading

Country

België	Deutschland
Belgique	Österreich
Belgien	Portugal

2	Select the AV input on your TV.			Connecting
3	Set the VCR/TV switch P to “VCR”.
4	Press the VCR-ON/OFF button
	1 to switch the VCR on.		Download
			Download in
	Downloading of the setup data
			progress,
	starts automatically. (Applicable		please wait.
			Position 67
	to TVs with “Q Link” or “DATA
	LOGIC” function)
		Indication during downloading

Country setting menu appears

on the TV screen before

downloading. Press the Cursor

buttons (3421) R to select

the desired country. Then, press

the OK button T and the

downloading automatically

starts.

Danmark	Suomi
España	Sverige
France	Schweiz
Italia	Suisse
Nederland	Svizzera
Norge	others

Menu for Country setting

If your TV is equipped with the “Easy Link”, “Megalogic”or “SMARTLINK” function, the Country setting menu appears on the TV screen before downloading. Press the Cursor buttons (3421) R to select the desired country. Then, press the OK button T and the downloading automatically

Country

België	Deutschland
Belgique	Österreich
Belgien	Portugal
Danmark	Suomi
España	Sverige
France	Schweiz
Italia	Suisse
Nederland	Svizzera
Norge	others

Menu for Country setting

√The VCR’s Auto Setup (Downloading) is complete when the programme position and the current time appear in

the VCR display.

	CVC	SP
Programme		Indication when the
position		current time is 16:45

Note:

≥If you accidentally switch on the VCR before the TV, downloading of the setup data from the TV may not be performed correctly. In this case, follow the operation steps below.

1Wait until the Auto Setup is complete on both the TV and the VCR.

2Press the MENU button U to display the OSD Main menu on the TV screen.

3Press the Cursor buttons (3421) R to select “Tuning” and then “Download”.

4Press the OK button T twice. Downloading of the setup data from the TV to the VCR starts.

5When the programme position and the current time appear in the VCR display, downloading is complete.

starts.

√ When the programme position	CVC	SP
and the current time appear in
the VCR display, the VCR’s
Auto Setup (Downloading) is	Programme	Indication when the
complete.
	position	current time is 16:45

Hint:

≥If you select “Schweiz”, “Suisse” or “Svizzera” on the Country setting menu, the Display setting menu appears automatically to let you set the item “Power save” to “ON”. In this setting, the VCR’s power consumption is minimised when it is off (Standby mode).To turn the VCR on, keep the VCR-ON/OFF button 1 pressed on the VCR main unit. It is not possible to turn it on with the remote control.

11