Panasonic NV-FJ760 To Connect the VCR to a Decoder, To Connect the VCR to a Stereo Amplifier

Page 40

Connecting the VCR to a Decoder/ Connecting the VCR to a Stereo Amplifier

To connect this VCR to a decoder or a stereo amplifier, make the connections shown in the illustration below.

For the connection to the TV, see pages 10 and 12.

.

For details about the connection, also read the operating instructions of the decoder or stereo amplifier.

Be sure to keep the VCR, TV and decoder or stereo amplifier switched off until you have finished all connections.

For your safety, do not connect or handle the equipment with wet hands.

To Connect the VCR to a Decoder

Decoder here refers to the device used to decode scrambled broadcasts (Pay TV).

l

≥When you start playback on the VCR, the TV is automatically switched to the VCR mode. However, during playback, it is not possible to switch the TV back to the TV mode.

≥If a Pay TV station has been selected on the VCR when you switch to the TV mode, the picture on the TV is scrambled when you select a Pay TV station on the TV. In this case, either switch to the VCR mode or select the AV input on the TV.

Hint:

≥“RGB” means separate Red/Green/Blue colour signals. If you connect a TV equipped with RGB input capability to the AV1 socket k on this VCR, and a decoder equipped with RGB output capability to the AV2 socket l, the TV can receive RGB signal input from the decoder via the VCR.

To Connect the VCR to a Stereo Amplifier

Audio cable (not supplied)

1 m

Decoder (not supplied)

1

2

 

 

21-pin Scart socket

To an AC mains socket

 

21-pin Scart cable

 

 

(not supplied)

1Connect a 21-pin Scart cable (not supplied) to the AV2 21-pin Scart socket l on the VCR and to the 21-pin Scart socket on the decoder.

2Connect the decoder’s mains lead to an AC mains socket.

3Set “AV2” to “DECODER”. For details, see page 53.

AV Link Function

If the VCR is connected to the TV via a 21-pin Scart cable, you can use the AV LINK button B to switch the TV from normal TV reception over to the video playback channel (AV input) (and vice versa). In the VCR mode (when the VCR indication in the VCR display is lit), the TV is switched to the video playback channel (AV input). In the TV mode (when the VCR indication is not lit), the TV is switched to TV reception.

 

VCR

TV

VCR Mode

VCR indication

AV Input

 

is lit.

is selected.

 

 

 

TV Mode

VCR indication

TV reception

 

is not lit.

is selected.

≥When you press the MENU button U to display the menu on the TV screen, the TV is also automatically switched to the VCR mode, however, the VCR indication does not appear in this case.

Audio Input sockets

Stereo amplifier (not supplied)

2

To an AC mains socket

1Connect an Audio cable (not supplied) to the Audio Output sockets m on the VCR and to Audio Input sockets on the stereo amplifier.

2Connect the stereo amplifier’s mains lead to an AC mains socket.

40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents NV-FJ760 Series Contents Dear CustomerControls and Components See page 4. VCR Operation See page 8. TV OperationVCR Operation Use Checking the Accessories/Preparing the Remote ControlBefore Avoid sudden changes in temperature Keep the VCR away from high temperaturesCleaning the VCR Avoid humidity and dustDo not Remove Outer Cover Before UseRemarks 3 Methods for Switching To the AV Input onYour Panasonic TV Setting the Remote Control to Operate Your TVTV Operation List of TVs Compatible With the VCR’s Remote Control Manufacturer CodeHints Setting ConnectingOr Method Steps below. RF ConnectionConnecting and Setting Up Auto Setup FunctionInitial setting is channel Screen, the tuning is CompleteNumber of the RF output Channel appears on the VCR Display SeeWhen You Insert a Video Cassette Setting UpPlayback To Play back S-VHS Cassette Tape SQPB=S-VHS Quasi PlaybackTo Stop Playback Automatically Playback Off Timer Function To Eject the Video Cassette Using the Remote ControlPlayback To Play Back a Recorded Part RepeatedlyRecording To Select the Desired Tape SpeedTo Pause Recording To Display the Approximate Remaining Tape TimeTo Prevent Accidental Erasure of Recorded Contents Linked Timer Recordings with a Digital ReceiverRecording To Manually Adjust the Audio Recording Level To Programme with the On Screen Display OSD Timer RecordingMode To Programme with ShowView Function To Suspend the Timer Recording Standby ModePress the Numeric buttons To enter the ShowView number Other Timer Recordings and Convenient Functions TimerSetting the Recording Date/Days To Activate the Auto SP/LP Change FunctionTo Check the Contents of Timer Recording Programmings Programming a Timer Recording of a Satellite ProgrammeTo Change a Timer Recording Programming To Cancel the Programming of a Timer Recording Timer RecordingTo Check the Total Timer Recording Programming Time How to Read the Tape Library Contents Precautions for RecordingTape Library System Tape To Check the Tape Library DataTo Check on Which Cassette a Desired Programme Is Recorded Contents menu disappears Is found, the list of LibraryPlayback starts By cassette number Press the Cursor buttons To selectTo Manually Enter or Editing a Title or Category Tape Library SystemData are now deleted from Main menuTo Restore Deleted Tape Library Data To Demonstrate the Tape Library SystemTo Cancel the Index Search or to Stop Playback To Cancel the Intro-Jet Scan or to Stop PlaybackSearch Functions OperationAssemble Editing EditingAdvanced Operations To Change the Recording Time Album FunctionPress the Still Album Button @ on the remote Synchronized Editing See page 20.Operations AdvancedInsert Editing Audio Dubbing Audio Dubbing on a Panasonic Hi-Fi VCR GeneralOne-Touch Editing VW-EC500E/EC310E/EC300E to the Edit socketVCR Mode TV ModeTo Connect the VCR to a Decoder To Connect the VCR to a Stereo AmplifierHow to install the satellite receiver Connect the RF coaxial cable to the Aerial Output socketPreparation To Prepare the Satellite Receiver Standby Type ActionPress the Numeric buttons 2 to select the satellite channel To select SAT EnterTo select a Programme position whoseTV station name is indicated To select the entryTo Obtain the Best Tuning Condition To Preset Pay TV StationsTo Enter Newly Available TV Stations List of TV Reception ChannelsTo Change the Type of Video System Colour TV system To Change the Subtitle Teletext Page Number SubtitlesVarious Settings To Change the Title Teletext Page Number TitleCursor buttons 34 R to Select the correct TeletextDesired TV station Follow the operations belowTo Return the VCR to the Shipping Condition To Restart the Auto SetupTo Restart the Download To Manually Adjust the Clock Setting the VCR’s ClockTo Activate the Automatic Time Correction Function Settings for the Main Menu Item Display Other Convenient Functions Various SettingsFor Automatic Display of the Channel Selected Subtitle mode on or Power save and the entry fieldFor Power save in this order Subtitles and the presentlyVarious Settings for the Main Menu Item FunctionsTo Set the Playback Picture Sharpness Sharper or Softer To Set the Audio Mode to Be Used During Playback To Set the Remote Control ModeTo Set for One-Touch Editing or Other Editing Modes Language Setting Country SettingVPS Video Programme System/ PDC Programme Delivery Control GlossaryNicam Broadcasting System NV-FJ760EC/ECM/ECY Series Crystal View Control CVC Link FunctionPin Scart Socket Before Requesting Service √ On Screen Display Messages√ The VCR Does Not Work Correctly √ Playback Does Not Work Properly√ The Remote Control Does Not Work Correctly √ Recording Is Not Possible or Does Not Work Properly√ The Satellite Receiver Cannot Be Controlled Correctly √ The Tape Library System Does Not Work CorrectlyAdjusting the Playback Picture If the Still Picture Scrolls Up or Down V-Lock AdjustmentPrecautions To Return to Auto TrackingSpecifications Central P.O. Box 288, Osaka 530-91, Japan
Top Page Image Contents