Panasonic NV-FJ760 manual Setting the Remote Control to Operate Your TV, TV Operation

Page 8

Setting the Remote Control to Operate Your TV

This setting procedure allows you to operate the TVs of most brands using the remote control supplied with this VCR.

Some TV models cannot be operated with this remote control.

1Set the VCR/TV switch P to “TV”.

2Look up your TV’s manufacturer in the list of TVs compatible with the VCR’s remote control on the next page.

3While keeping the TV-ON/OFF button 1 pressed, use the Numeric buttons 2 to enter the manufacturer’s code. If there is more than one code listed for that manufacturer, try the first code.

Be sure to enter the code in two digits. Example: 01

4Check whether you can operate the TV correctly with the VCR’s remote control.

If the TV cannot be operated properly:

In step 3, enter the other code listed for that manufacturer and repeat step 4.

TV Operation

The explanations below show you what functions individual buttons have when the VCR/TV switch P is set to “TV”.

°°1 TV-ON/OFF button

To switch the TV on from standby mode (OFF) or vice versa.

On some TVs it is only possible to switch the TV to standby mode (OFF) with this button, but not on. In this case, try to turn the TV on with one of the following buttons:

Numeric buttons 2

AV button 3

Channel button N

°°2 Numeric buttons

To select the programme positions (1s99) on the TV.

°°3 AV button

To select the desired AV input on the TV.

°°N Channel button

To select the desired programme position (TV station) on the TV.

°°O TV/TEXT button

To switch between normal TV mode and teletext mode.

°°W Teletext buttons

If your TV is equipped for Teletext reception, you can use these buttons to change the teletext information displayed on the screen and select desired information. For details, refer to your TV’s operating instructions.

°°X TV ASPECT button

To switch the screen format between the wide-screen and other formats.

°°Y VOLUME button

To adjust the volume of the TV.

The 3 Methods for Switching

to the AV Input onYour Panasonic TV

Your Panasonic TV uses one of three different methods for switching between TV reception and the AV input(s). Perform the operations steps listed for the switching methods A, B and C below to determine which one your Panasonic TV uses.

A1 Set the VCR/TV switch P to “TV”.

2 Press the AV button 3 to switch to the AV Input. Each press of the AV button 3 switches between “TV reception” and “AV Input(s)”.

B1 Set the VCR/TV switch P to “TV”.

2 Press the AV button 3.

Colour bars for selecting the AV Input appear on the TV screen.

3 Follow the instructions displayed on the TV screen to select the desired AV Input from the displayed colour bars for the AV Input by pressing the corresponding colour button @ (red) :, DATEi (green) ;, ONi (yellow) G or OFFi (blue) F on the remote control.

C1 Set the VCR/TV switch P to “TV”.

2 Press the AV button 3.

The last previously selected AV Input indication appears on the TV screen. The indications for selecting another AV Input also appear,

but they disappear a few seconds later.

3 Before the indications for selecting another AV Input disappear, press the ? button :, DATEp button ;, ONp button G or OFFp button F to select the desired AV input.

With the following four buttons, you can move and select as follows:

? :: Move left

DATEp ;: Move down

ONp G:

Move up

OFFp F:

Move right

 

 

8

Image 8
Contents NV-FJ760 Series Contents Dear CustomerControls and Components See page 4. VCR Operation See page 8. TV OperationVCR Operation Before Checking the Accessories/Preparing the Remote ControlUse Avoid sudden changes in temperature Keep the VCR away from high temperaturesCleaning the VCR Avoid humidity and dustRemarks Before UseDo not Remove Outer Cover TV Operation Setting the Remote Control to Operate Your TV3 Methods for Switching To the AV Input onYour Panasonic TV List of TVs Compatible With the VCR’s Remote Control Manufacturer CodeHints Setting ConnectingOr Method Steps below. RF ConnectionConnecting and Setting Up Auto Setup FunctionInitial setting is channel Screen, the tuning is CompleteNumber of the RF output Channel appears on the VCR Display SeeWhen You Insert a Video Cassette Setting UpPlayback To Play back S-VHS Cassette Tape SQPB=S-VHS Quasi PlaybackTo Stop Playback Automatically Playback Off Timer Function To Eject the Video Cassette Using the Remote ControlPlayback To Play Back a Recorded Part RepeatedlyRecording To Select the Desired Tape SpeedTo Pause Recording To Display the Approximate Remaining Tape TimeRecording Linked Timer Recordings with a Digital ReceiverTo Prevent Accidental Erasure of Recorded Contents To Manually Adjust the Audio Recording Level Mode Timer RecordingTo Programme with the On Screen Display OSD Press the Numeric buttons To enter the ShowView number To Suspend the Timer Recording Standby ModeTo Programme with ShowView Function Other Timer Recordings and Convenient Functions TimerSetting the Recording Date/Days To Activate the Auto SP/LP Change FunctionTo Change a Timer Recording Programming Programming a Timer Recording of a Satellite ProgrammeTo Check the Contents of Timer Recording Programmings To Check the Total Timer Recording Programming Time Timer RecordingTo Cancel the Programming of a Timer Recording Tape Library System Precautions for RecordingHow to Read the Tape Library Contents To Check on Which Cassette a Desired Programme Is Recorded To Check the Tape Library DataTape Contents menu disappears Is found, the list of LibraryPlayback starts By cassette number Press the Cursor buttons To selectTo Manually Enter or Editing a Title or Category Tape Library SystemData are now deleted from Main menuTo Restore Deleted Tape Library Data To Demonstrate the Tape Library SystemTo Cancel the Index Search or to Stop Playback To Cancel the Intro-Jet Scan or to Stop PlaybackSearch Functions OperationAdvanced Operations EditingAssemble Editing Press the Still Album Button @ on the remote Album FunctionTo Change the Recording Time Synchronized Editing See page 20.Operations AdvancedInsert Editing Audio Dubbing Audio Dubbing on a Panasonic Hi-Fi VCR GeneralOne-Touch Editing VW-EC500E/EC310E/EC300E to the Edit socketVCR Mode TV ModeTo Connect the VCR to a Decoder To Connect the VCR to a Stereo AmplifierHow to install the satellite receiver Connect the RF coaxial cable to the Aerial Output socketPreparation To Prepare the Satellite Receiver Standby Type ActionPress the Numeric buttons 2 to select the satellite channel To select SAT EnterTo select a Programme position whoseTV station name is indicated To select the entryTo Obtain the Best Tuning Condition To Preset Pay TV StationsTo Enter Newly Available TV Stations List of TV Reception ChannelsTo Change the Type of Video System Colour TV system To Change the Subtitle Teletext Page Number SubtitlesVarious Settings To Change the Title Teletext Page Number TitleCursor buttons 34 R to Select the correct TeletextDesired TV station Follow the operations belowTo Restart the Download To Restart the Auto SetupTo Return the VCR to the Shipping Condition To Activate the Automatic Time Correction Function Setting the VCR’s ClockTo Manually Adjust the Clock For Automatic Display of the Channel Other Convenient Functions Various SettingsSettings for the Main Menu Item Display Selected Subtitle mode on or Power save and the entry fieldFor Power save in this order Subtitles and the presentlyTo Set the Playback Picture Sharpness Sharper or Softer Settings for the Main Menu Item FunctionsVarious To Set for One-Touch Editing or Other Editing Modes To Set the Remote Control ModeTo Set the Audio Mode to Be Used During Playback Language Setting Country SettingNicam Broadcasting System NV-FJ760EC/ECM/ECY Series GlossaryVPS Video Programme System/ PDC Programme Delivery Control Pin Scart Socket Link FunctionCrystal View Control CVC Before Requesting Service √ On Screen Display Messages√ The VCR Does Not Work Correctly √ Playback Does Not Work Properly√ The Remote Control Does Not Work Correctly √ Recording Is Not Possible or Does Not Work Properly√ The Satellite Receiver Cannot Be Controlled Correctly √ The Tape Library System Does Not Work CorrectlyAdjusting the Playback Picture If the Still Picture Scrolls Up or Down V-Lock AdjustmentPrecautions To Return to Auto TrackingSpecifications Central P.O. Box 288, Osaka 530-91, Japan