Panasonic NV-FJ760 manual Audio Dubbing on a Panasonic Hi-Fi VCR, General

Page 38

Audio Dubbing on a Panasonic Hi-Fi VCR

General

≥The VHS format allows audio dubbing only on the normal (mono) audio track, as the Hi-Fi audio tracks cannot be re-recorded without erasing the video signal.

A. Audio Dubbing and then Playing Back the Audio-Dubbed Mono Sound Alone

1Press the INPUT SELECT button 3 to select the AV input terminal to which the audio dubbing source unit is connected.

2Press the Play button I to search for the tape position at which the audio dubbing is to start.

3Press the AUDIO button ? repeatedly until the “ss” indication appears. ≥ The normal audio track is now selected.

4Press the Pause/Still button e at this position.

5Press the A.DUB button _ to switch the VCR over to the audio dubbing mode.

6Press the Pause/Still button e to start audio dubbing.

7After audio dubbing has been completed, rewind the tape, play it back and make sure that the normal audio track is selected (see step 3 above).

8Check if the audio dubbing was performed to your satisfaction.

B. Audio Dubbing and then Playing Back the Audio-Dubbed Mono Sound and Original Hi-Fi Sound Together (Hi-Fi Mix Function)

1Press the INPUT SELECT button 3 to select the AV input terminal to which the audio dubbing source unit is connected.

2Press the Play button I to search for the tape position at which the audio dubbing is to start.

3Press the AUDIO button ? repeatedly until the “L R” indication appears. ≥ The Hi-Fi audio tracks are now selected.

4Press the Pause/Still button e at this position.

5Press the A.DUB button _ to switch the VCR over to the audio dubbing mode.

6Press the Pause/Still button e to start audio dubbing.

7After audio dubbing has been completed, rewind the tape, play it back and set “Audio mode” to “MIX”. (For details, refer to page 54.)

8Check if the audio dubbing was performed to your satisfaction. The original sound and the new sound are heard simultaneously (mixed together).

C. Externally Mixing the Sound from the Hi-Fi Tracks with the New Sound for Audio

Dubbing and then Playing It Back (To produce audio-dubbed tapes for playback on mono VCRs)

1Press the INPUT SELECT button 3 to select the AV input terminal to which the audio dubbing source unit is connected.

2Press the Play button I to search for the tape position at which the audio dubbing is to start.

3Press the AUDIO button ? repeatedly until the “L R” indication appears.

4Press the Pause/Still button e at this position.

5Press the A.DUB button _ to switch the VCR over to the audio dubbing mode.

≥Input both the original signals of the Hi-Fi tracks (from the AV1, AV2 or the Audio Output sockets) and the new sound into a mixing console (optional), and then input the mixed sound back into the VCR (via the AV1, AV2 or AV3 socket) for audio dubbing.

6Press the Pause/Still button e to start audio dubbing.

7After audio dubbing has been completed, rewind the tape, play it back and press the AUDIO button ? repeatedly until the “ss” indication appears.

≥The normal audio track is now selected.

8Check if the audio dubbing was performed to your satisfaction. The original sound and the new sound are heard simultaneously (mixed together).

38

Page 37 Page 39
Image 38
Page 37 Page 39
Contents NV-FJ760 Series Contents Dear CustomerControls and Components See page 4. VCR Operation See page 8. TV OperationVCR Operation Before Checking the Accessories/Preparing the Remote ControlUse Cleaning the VCR Avoid sudden changes in temperatureKeep the VCR away from high temperatures Avoid humidity and dustRemarks Before UseDo not Remove Outer Cover TV Operation Setting the Remote Control to Operate Your TV3 Methods for Switching To the AV Input onYour Panasonic TV List of TVs Compatible With the VCR’s Remote Control Manufacturer CodeHints Setting ConnectingOr Method Steps below. RF ConnectionConnecting and Setting Up Auto Setup FunctionNumber of the RF output Channel appears on the VCR Display Initial setting is channelScreen, the tuning is Complete SeeWhen You Insert a Video Cassette Setting UpPlayback To Play back S-VHS Cassette Tape SQPB=S-VHS Quasi PlaybackPlayback To Stop Playback Automatically Playback Off Timer FunctionTo Eject the Video Cassette Using the Remote Control To Play Back a Recorded Part RepeatedlyTo Pause Recording RecordingTo Select the Desired Tape Speed To Display the Approximate Remaining Tape TimeRecording Linked Timer Recordings with a Digital ReceiverTo Prevent Accidental Erasure of Recorded Contents To Manually Adjust the Audio Recording Level Mode Timer RecordingTo Programme with the On Screen Display OSD Press the Numeric buttons To enter the ShowView number To Suspend the Timer Recording Standby ModeTo Programme with ShowView Function Setting the Recording Date/Days Other Timer Recordings and Convenient FunctionsTimer To Activate the Auto SP/LP Change FunctionTo Change a Timer Recording Programming Programming a Timer Recording of a Satellite ProgrammeTo Check the Contents of Timer Recording Programmings To Check the Total Timer Recording Programming Time Timer RecordingTo Cancel the Programming of a Timer Recording Tape Library System Precautions for RecordingHow to Read the Tape Library Contents To Check on Which Cassette a Desired Programme Is Recorded To Check the Tape Library DataTape Playback starts Contents menu disappearsIs found, the list of Library By cassette number Press the Cursor buttons To selectTo Manually Enter or Editing a Title or Category Tape Library SystemData are now deleted from Main menuTo Restore Deleted Tape Library Data To Demonstrate the Tape Library SystemSearch Functions To Cancel the Index Search or to Stop PlaybackTo Cancel the Intro-Jet Scan or to Stop Playback OperationAdvanced Operations EditingAssemble Editing Press the Still Album Button @ on the remote Album FunctionTo Change the Recording Time Synchronized Editing See page 20.Operations AdvancedInsert Editing Audio Dubbing Audio Dubbing on a Panasonic Hi-Fi VCR GeneralOne-Touch Editing VW-EC500E/EC310E/EC300E to the Edit socketTo Connect the VCR to a Decoder VCR ModeTV Mode To Connect the VCR to a Stereo AmplifierHow to install the satellite receiver Connect the RF coaxial cable to the Aerial Output socketPreparation Press the Numeric buttons 2 to select the satellite channel To Prepare the Satellite ReceiverStandby Type Action To select SAT EnterTV station name is indicated To select aProgramme position whose To select the entryTo Enter Newly Available TV Stations To Obtain the Best Tuning ConditionTo Preset Pay TV Stations List of TV Reception ChannelsTo Change the Type of Video System Colour TV system To Change the Subtitle Teletext Page Number SubtitlesCursor buttons 34 R to Various SettingsTo Change the Title Teletext Page Number Title Select the correct TeletextDesired TV station Follow the operations belowTo Restart the Download To Restart the Auto SetupTo Return the VCR to the Shipping Condition To Activate the Automatic Time Correction Function Setting the VCR’s ClockTo Manually Adjust the Clock For Automatic Display of the Channel Other Convenient Functions Various SettingsSettings for the Main Menu Item Display For Power save in this order Selected Subtitle mode on orPower save and the entry field Subtitles and the presentlyTo Set the Playback Picture Sharpness Sharper or Softer Settings for the Main Menu Item FunctionsVarious To Set for One-Touch Editing or Other Editing Modes To Set the Remote Control ModeTo Set the Audio Mode to Be Used During Playback Language Setting Country SettingNicam Broadcasting System NV-FJ760EC/ECM/ECY Series GlossaryVPS Video Programme System/ PDC Programme Delivery Control Pin Scart Socket Link FunctionCrystal View Control CVC √ The VCR Does Not Work Correctly Before Requesting Service√ On Screen Display Messages √ Playback Does Not Work Properly√ The Satellite Receiver Cannot Be Controlled Correctly √ The Remote Control Does Not Work Correctly√ Recording Is Not Possible or Does Not Work Properly √ The Tape Library System Does Not Work CorrectlyPrecautions Adjusting the Playback PictureIf the Still Picture Scrolls Up or Down V-Lock Adjustment To Return to Auto TrackingSpecifications Central P.O. Box 288, Osaka 530-91, Japan
Top Page Image Contents