Panasonic NV-FJ760 Search Functions, Operation, To Cancel the Index Search or to Stop Playback

Page 32

Search Functions

To Quickly Find the Beginning of a

Desired Programme

(VISS=VHS Index Search System)

This VCR automatically records special index signals on the tape every time a recording is started. The Index search function makes use of these index signals to let you find the beginning of a desired programme quickly and easily.

Index signals are automatically recorded in the following cases:

≥When you start a recording by pressing the REC button J, REC/OTR button d or DIRECT TV REC button 6.

≥When a timer recording starts.

≥When you press the REC button J on the remote control during recording.

Conditions for correct operation of the Index search function:

≥The VCR must be in the stop mode or in the playback mode.

≥Each programme recorded on the tape must be at least 5 minutes long.

Preparations

≥Display the VCR picture on the TV.

≥Insert a recorded video cassette.

As soon as the cassette is inserted, the Cassette Number Check starts. Wait a few moments until it is completed. (See page 15.)

Operation

1Press the INDEX button K (that corresponds to the direction from the current tape position in which the desired programme is located on the tape) to start the

index search. For example, if you want to search for the 2nd recorded programme in

forward direction, press the INDEX L button K twice.

≥The VCR fast-forwards or rewinds the tape and searches for the specified index signal (the beginning of the desired recorded programme).

When it has been found, playback starts automatically.

To Cancel the Index Search or to Stop Playback:

Press the Stop button 9.

Hints:

≥Searching in either direction is possible up to the 20th index signal.

≥If you press either of the INDEX buttons K too many times, simply press the other INDEX button K (indicating the opposite direction) to correct it. In this way, you can reduce the displayed figure down to 1.

≥The figure on the VCR display decreases by 1 every time an index signal is located.

To Search for a Desired Programme While Checking the Recorded Contents on a Cassette (Intro-Jet Scan)

This VCR automatically records special index signals on the tape every time a recording starts. The Intro-Jet Scan function makes use of these index signals to play back the beginning of each programme recorded on the cassette one after another at high speed.

This lets you quickly and easily check the contents of a cassette and find a desired programme.Index signals are automatically recorded in the following cases:

≥When you start a recording by pressing the REC button J, REC/OTR button d or DIRECT TV REC button 6.

≥When a timer recording starts.

≥When you press the REC button J on the remote control during recording.

Conditions for correct operation of the Intro-Jet Scan function:

≥The cassette must have been ejected after the timer recordings were performed.

≥VCR must be switched on, be in the playback mode or be in the standby mode.

≥Each programme recorded on the tape must be at least 15 minutes long.

Preparations

≥Display the VCR picture on the TV.

≥Insert a recorded video cassette.

Operations

1Insert a pre-recorded video cassette.

If a cassette is already in the VCR, press the LIBRARY button M.

¡As soon as the cassette is inserted, the Cassette Number Check starts. Wait a few moments until it is completed. (See page 15.)

If the “Intro-Jet Scan” indication does not appear on the TV screen, press the LIBRARY button M to make it appear.

 

Content of tape: 100

 

 

 

 

 

Content of tape: ---

 

Title

Date/Category

 

 

Title

 

Date/Category

 

 

 

 

 

 

 

 

 

 

 

 

 

ZDF (18:58)

We 19.04.98

 

 

 

 

>> Intro-Jet Scan <<

 

 

 

 

 

 

 

 

 

>>Find space to record <<

 

>> Intro-Jet Scan <<

or

 

 

 

 

 

 

 

 

 

: Subtitles

 

: Subtitles

2Press the Cursor buttons (34) R to select the “Intro-Jet Scan” indication and then press the LIBRARY button M to start the Intro-Jet Scan.

≥After rewinding the tape to the beginning, the VCR plays it back at high speed for approximately 10 seconds. It then fast-forwards the tape to the next tape position marked by an index signal (beginning of a programme), and every time an index signal is found, the VCR switches over to high-speed playback (Cue) for about 10 seconds.

 

 

Beginning of tape

 

 

 

 

Present tape position

 

 

 

 

 

 

 

 

Index signal

 

 

Programme 2

 

Programme 3

 

 

 

 

 

Programme 1

 

 

 

 

 

Rewinding

 

 

 

 

 

High-speed Playback

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fast-forwarding

 

 

(Cue)

 

 

 

 

 

 

3When you have found the programme that you want to view, press the Play button I to start normal playback.

To Cancel the Intro-Jet Scan or to Stop Playback:

Press the Stop button 9.

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents NV-FJ760 Series Contents Dear CustomerControls and Components See page 4. VCR Operation See page 8. TV OperationVCR Operation Before Checking the Accessories/Preparing the Remote ControlUse Avoid sudden changes in temperature Keep the VCR away from high temperaturesCleaning the VCR Avoid humidity and dustRemarks Before UseDo not Remove Outer Cover TV Operation Setting the Remote Control to Operate Your TV3 Methods for Switching To the AV Input onYour Panasonic TV List of TVs Compatible With the VCR’s Remote Control Manufacturer CodeHints Setting ConnectingOr Method Steps below. RF ConnectionConnecting and Setting Up Auto Setup FunctionInitial setting is channel Screen, the tuning is CompleteNumber of the RF output Channel appears on the VCR Display SeeWhen You Insert a Video Cassette Setting UpPlayback To Play back S-VHS Cassette Tape SQPB=S-VHS Quasi PlaybackTo Stop Playback Automatically Playback Off Timer Function To Eject the Video Cassette Using the Remote ControlPlayback To Play Back a Recorded Part RepeatedlyRecording To Select the Desired Tape SpeedTo Pause Recording To Display the Approximate Remaining Tape TimeRecording Linked Timer Recordings with a Digital ReceiverTo Prevent Accidental Erasure of Recorded Contents To Manually Adjust the Audio Recording Level Mode Timer RecordingTo Programme with the On Screen Display OSD Press the Numeric buttons To enter the ShowView number To Suspend the Timer Recording Standby ModeTo Programme with ShowView Function Other Timer Recordings and Convenient Functions TimerSetting the Recording Date/Days To Activate the Auto SP/LP Change FunctionTo Change a Timer Recording Programming Programming a Timer Recording of a Satellite ProgrammeTo Check the Contents of Timer Recording Programmings To Check the Total Timer Recording Programming Time Timer RecordingTo Cancel the Programming of a Timer Recording Tape Library System Precautions for RecordingHow to Read the Tape Library Contents To Check on Which Cassette a Desired Programme Is Recorded To Check the Tape Library DataTape Contents menu disappears Is found, the list of LibraryPlayback starts By cassette number Press the Cursor buttons To selectTo Manually Enter or Editing a Title or Category Tape Library SystemData are now deleted from Main menuTo Restore Deleted Tape Library Data To Demonstrate the Tape Library SystemTo Cancel the Index Search or to Stop Playback To Cancel the Intro-Jet Scan or to Stop PlaybackSearch Functions OperationAdvanced Operations EditingAssemble Editing Press the Still Album Button @ on the remote Album FunctionTo Change the Recording Time Synchronized Editing See page 20.Operations AdvancedInsert Editing Audio Dubbing Audio Dubbing on a Panasonic Hi-Fi VCR GeneralOne-Touch Editing VW-EC500E/EC310E/EC300E to the Edit socketVCR Mode TV ModeTo Connect the VCR to a Decoder To Connect the VCR to a Stereo AmplifierHow to install the satellite receiver Connect the RF coaxial cable to the Aerial Output socketPreparation To Prepare the Satellite Receiver Standby Type ActionPress the Numeric buttons 2 to select the satellite channel To select SAT EnterTo select a Programme position whoseTV station name is indicated To select the entryTo Obtain the Best Tuning Condition To Preset Pay TV StationsTo Enter Newly Available TV Stations List of TV Reception ChannelsTo Change the Type of Video System Colour TV system To Change the Subtitle Teletext Page Number SubtitlesVarious Settings To Change the Title Teletext Page Number TitleCursor buttons 34 R to Select the correct TeletextDesired TV station Follow the operations belowTo Restart the Download To Restart the Auto SetupTo Return the VCR to the Shipping Condition To Activate the Automatic Time Correction Function Setting the VCR’s ClockTo Manually Adjust the Clock For Automatic Display of the Channel Other Convenient Functions Various SettingsSettings for the Main Menu Item Display Selected Subtitle mode on or Power save and the entry fieldFor Power save in this order Subtitles and the presentlyTo Set the Playback Picture Sharpness Sharper or Softer Settings for the Main Menu Item FunctionsVarious To Set for One-Touch Editing or Other Editing Modes To Set the Remote Control ModeTo Set the Audio Mode to Be Used During Playback Language Setting Country SettingNicam Broadcasting System NV-FJ760EC/ECM/ECY Series GlossaryVPS Video Programme System/ PDC Programme Delivery Control Pin Scart Socket Link FunctionCrystal View Control CVC Before Requesting Service √ On Screen Display Messages√ The VCR Does Not Work Correctly √ Playback Does Not Work Properly√ The Remote Control Does Not Work Correctly √ Recording Is Not Possible or Does Not Work Properly√ The Satellite Receiver Cannot Be Controlled Correctly √ The Tape Library System Does Not Work CorrectlyAdjusting the Playback Picture If the Still Picture Scrolls Up or Down V-Lock AdjustmentPrecautions To Return to Auto TrackingSpecifications Central P.O. Box 288, Osaka 530-91, Japan
Top Page Image Contents