Panasonic NV-FJ760 manual To Programme with ShowView Function

Page 22

To Programme with the

ShowView Function

The ShowView numbers assigned to each TV programme and published alongside the TV programme listings in newspapers and magazines make it extremely easy to set the VCR for timer recording.

The duration of a timer recording programmed with ShowView number may be slightly longer than the actual duration of the TV programme.

Preparations

≥Confirm that the VCR is on.

≥Confirm that the TV is on and the VCR viewing channel is selected.

≥Insert a video cassette with an intact erasure prevention tab.

As soon as the cassette is inserted, the Cassette Number Check starts. Wait a few moments until it is completed. (See page 15.)

≥Set the VCR/TV switch P to “VCR”.

Example:

Programming a timer recording of a TV programme with the ShowView number 920126

Operations

1 Press the SHOW VIEW button L to display the menu for entering the ShowView number on the TV.

6 Press the OK button T again to conclude the

settings.

≥ To programme additional

 

Timer recording

 

 

 

 

 

Pos

Start

Stop SP VPS

 

 

timer recordings, repeat

 

 

Name DATE ON

OFF LP PDC Min

operation steps 1–6.

ZDF

27/10 We 20:00 21:30 SP

ON

90

 

jjjjj

jj/jj jj jj:jj jj:jj jj

jjj

jjj

 

 

jjjjj

jj/jj jj jj:jj jj:jj jj

jjj

jjj

 

 

jjjjj

jj/jj jj jj:jj jj:jj jj

jjj

jjj

7 Press the TIMER REC button D to switch the VCR over to the timer recording standby mode.

≥Check that “Á” is lit on the VCR display.

If it is flashing, check the timer recording details again. (See page 24.)

If “– –” Appears under “Pos/Name” after Entering a ShowView Number

Pos/Name stands for Programme Position/TV Station Name. Normally, the name of the TV station or the number of the programme position is displayed under “Pos/Name”. However, if the TV station information was not automatically set during Preset Download or Auto Setup due to adverse reception conditions, the “– –” indication appears instead. In such a case, follow the operation steps below to correct it.

Press the Channel buttons :

Timer recording

 

 

 

 

 

 

repeatedly to select the programme

Pos

Start Stop

SP VPS

Name DATE

ON

OFF

LP PDC Min

 

position on which the TV programme

 

 

15:00

17:00

SP jjj 120

jj jjjjj

 

2 Press the Numeric buttons 2

to enter the ShowView number.

≥If you have entered a wrong digit, press the Cursor button (2) R and then enter the correct digit.

On Screen Display

ShowView

9 2 0 1 2 6

 

jjjjj

jj/jj jj jj:jj jj:jj jj

jjj

jjj

to be recorded will be broadcast.

jjjjj

jj/jj jj jj:jj jj:jj jj

jjj

jjj

jjjjj

jj/jj jj jj:jj jj:jj jj

jjj

jjj

jjjjj

jj/jj jj jj:jj jj:jj jj

jjj

jjj

 

jjjjj

jj/jj jj jj:jj jj:jj jj

jjj

jjj

“– –” indication

After you have entered the information of a TV station, it remains stored in the VCR’s memory, and you do not need to enter it again in the future.

3 Press the OK button T to display the programmed content.

4 Press the SP/LP button E to set the desired tape

speed.

 

Timer recording

 

 

 

 

 

 

 

 

 

 

 

≥ SP provides standard

Pos

 

Start

Stop SP VPS

 

 

Name DATE

ON

OFF LP PDC Min

recording time and

 

ZDF

27/10 We 20:00 21:30

SP

ON

90

 

 

jjjjj

jj/jj jj jj:jj jj:jj jj

jjj

jjj

optimum picture quality.

 

jjjjj

jj/jj jj jj:jj jj:jj jj

jjj

jjj

 

jjjjj

jj/jj jj jj:jj jj:jj jj

jjj

jjj

 

 

/

:

:

 

 

 

 

LP provides double recording time with slightly

 

 

 

reduced picture quality.

 

 

 

 

 

 

 

 

 

EP provides triple recording time with slightly reduced picture quality.

Regarding the “A” indication, refer to page 23.

≥To extend the ending time or to make any corrections, use the Cursor button (3421) R, the Channel buttons :, the DATE button ;, the ON button G, the OFF button F, the SP/LP button E.

≥See page 23 for VPS/PDC recording.

5 Press the TAPE button C to select the corresponding

cassette tape length.

(See page 51.)

To Suspend the Timer Recording Standby Mode

See the previous page.

Note:

≥If the VCR is not put in the timer recording standby mode at the latest 10 minutes before the programmed timer recording starting time, the “Á” indication flashes on the VCR display. In this case, press the TIMER REC button D to put the VCR in the timer recording standby mode.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents NV-FJ760 Series Contents Dear CustomerControls and Components See page 4. VCR Operation See page 8. TV OperationVCR Operation Use Checking the Accessories/Preparing the Remote ControlBefore Cleaning the VCR Avoid sudden changes in temperatureKeep the VCR away from high temperatures Avoid humidity and dustDo not Remove Outer Cover Before UseRemarks 3 Methods for Switching To the AV Input onYour Panasonic TV Setting the Remote Control to Operate Your TVTV Operation List of TVs Compatible With the VCR’s Remote Control Manufacturer CodeHints Setting ConnectingOr Method Steps below. RF ConnectionConnecting and Setting Up Auto Setup FunctionNumber of the RF output Channel appears on the VCR Display Initial setting is channelScreen, the tuning is Complete SeeWhen You Insert a Video Cassette Setting UpPlayback To Play back S-VHS Cassette Tape SQPB=S-VHS Quasi PlaybackPlayback To Stop Playback Automatically Playback Off Timer FunctionTo Eject the Video Cassette Using the Remote Control To Play Back a Recorded Part RepeatedlyTo Pause Recording RecordingTo Select the Desired Tape Speed To Display the Approximate Remaining Tape TimeTo Prevent Accidental Erasure of Recorded Contents Linked Timer Recordings with a Digital ReceiverRecording To Manually Adjust the Audio Recording Level To Programme with the On Screen Display OSD Timer RecordingMode To Programme with ShowView Function To Suspend the Timer Recording Standby ModePress the Numeric buttons To enter the ShowView number Setting the Recording Date/Days Other Timer Recordings and Convenient FunctionsTimer To Activate the Auto SP/LP Change FunctionTo Check the Contents of Timer Recording Programmings Programming a Timer Recording of a Satellite ProgrammeTo Change a Timer Recording Programming To Cancel the Programming of a Timer Recording Timer RecordingTo Check the Total Timer Recording Programming Time How to Read the Tape Library Contents Precautions for RecordingTape Library System Tape To Check the Tape Library DataTo Check on Which Cassette a Desired Programme Is Recorded Playback starts Contents menu disappearsIs found, the list of Library By cassette number Press the Cursor buttons To selectTo Manually Enter or Editing a Title or Category Tape Library SystemData are now deleted from Main menuTo Restore Deleted Tape Library Data To Demonstrate the Tape Library SystemSearch Functions To Cancel the Index Search or to Stop PlaybackTo Cancel the Intro-Jet Scan or to Stop Playback OperationAssemble Editing EditingAdvanced Operations To Change the Recording Time Album FunctionPress the Still Album Button @ on the remote Synchronized Editing See page 20.Operations AdvancedInsert Editing Audio Dubbing Audio Dubbing on a Panasonic Hi-Fi VCR GeneralOne-Touch Editing VW-EC500E/EC310E/EC300E to the Edit socketTo Connect the VCR to a Decoder VCR ModeTV Mode To Connect the VCR to a Stereo AmplifierHow to install the satellite receiver Connect the RF coaxial cable to the Aerial Output socketPreparation Press the Numeric buttons 2 to select the satellite channel To Prepare the Satellite ReceiverStandby Type Action To select SAT EnterTV station name is indicated To select aProgramme position whose To select the entryTo Enter Newly Available TV Stations To Obtain the Best Tuning ConditionTo Preset Pay TV Stations List of TV Reception ChannelsTo Change the Type of Video System Colour TV system To Change the Subtitle Teletext Page Number SubtitlesCursor buttons 34 R to Various SettingsTo Change the Title Teletext Page Number Title Select the correct TeletextDesired TV station Follow the operations belowTo Return the VCR to the Shipping Condition To Restart the Auto SetupTo Restart the Download To Manually Adjust the Clock Setting the VCR’s ClockTo Activate the Automatic Time Correction Function Settings for the Main Menu Item Display Other Convenient Functions Various SettingsFor Automatic Display of the Channel For Power save in this order Selected Subtitle mode on orPower save and the entry field Subtitles and the presentlyVarious Settings for the Main Menu Item FunctionsTo Set the Playback Picture Sharpness Sharper or Softer To Set the Audio Mode to Be Used During Playback To Set the Remote Control ModeTo Set for One-Touch Editing or Other Editing Modes Language Setting Country SettingVPS Video Programme System/ PDC Programme Delivery Control GlossaryNicam Broadcasting System NV-FJ760EC/ECM/ECY Series Crystal View Control CVC Link FunctionPin Scart Socket √ The VCR Does Not Work Correctly Before Requesting Service√ On Screen Display Messages √ Playback Does Not Work Properly√ The Satellite Receiver Cannot Be Controlled Correctly √ The Remote Control Does Not Work Correctly√ Recording Is Not Possible or Does Not Work Properly √ The Tape Library System Does Not Work CorrectlyPrecautions Adjusting the Playback PictureIf the Still Picture Scrolls Up or Down V-Lock Adjustment To Return to Auto TrackingSpecifications Central P.O. Box 288, Osaka 530-91, Japan
Top Page Image Contents