Panasonic NV-FJ604, NV-FJ606, NV-FJ610 manual Playback

Page 10

Playback

Preparations

Confirm that the VCR is on.

Confirm that the TV is on and the VCR viewing channel is selected.

Insert a recorded video cassette.

For Normal Playback:

VCR display

Press the Play button H.

 

 

 

 

For Cue Playback:

During playback, tap the Fast Forward button G.

To return to normal playback, press the

Play button H.

If you press and hold down the Fast Forward button G, cue playback continues for as long as you keep the

Notes:

Cue, review or slow playback will be automatically cancelled after 10 minutes, and still playback after 5 minutes.

During playback function other than normal playback, horizontal noise bars may appear in the picture, the colour of the picture may be unstable, or the picture may be otherwise distorted.

When you play back a tape recorded in the LP mode, the picture may be in black and white. However, these are not malfunctions.

To Play Back a Recorded Part Repeatedly

Press the Play button H on the remote control for more than 5 seconds.

The “R” indication appears on the On Screen Display.

If “OSD” is set to “OFF” (See page 26), the “R” indication will not appear in repeat playback mode.

button pressed.

For Review Playback:

During playback, tap the Rewind button 8.

To return to normal playback, press the

Play button H.

If you press and hold down the Rewind button 8, review playback continues for as long as you keep the button pressed.

Beginning

 

 

 

End of

 

 

of Tape

 

 

 

 

 

 

 

 

Recorded Part

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Repeat Playback

Control Signal

PLAYInterruption

(at least 5 sec.)

REWIND

R 0:00:29

Indication of the Repeat Playback mode

For Still Playback:

During playback, press the Pause/Slow button 7.

To return to normal playback, press the

Play button H or the Pause/Slow button

7.

To Cancel the Repeat Playback Mode:

Press the Stop button 9.

For Slow Playback:

During playback, keep the Pause/Slow button 7 pressed for 2 seconds or more.

To return to normal playback, press the Play button H.

Fast-forwarding or Rewinding the Tape:

To fast-forward the tape:

Press the Fast Forward button G in the stop mode.

To rewind the tape:

Press the Rewind button 8 in the stop mode.

To stop fast-forwarding or rewinding, press the Stop button

9.

To briefly view the picture during fast-forwarding or rewinding, press and hold down the corresponding button.

To Stop Playback

Press the Stop button 9.

To rewind the tape a little to view the same scene again

(Replay Function)

If you want to view the same scene again, for example because you could not catch clearly what a person said, simply press the REPLAY button 4, to rewind the tape a little from its present position and play it back again.

The direction in which the tape is rewound depends on what playback mode the VCR is in when you press the REPLAY button 4.

If you press the REPLAY button 4 when the VCR is in the stop, rewind, fast-forward, slow playback, or standby (Off) mode, the Replay function does not work.

During Normal Playback, Cue Playback and Still Playback:

When you press the REPLAY button 4, the VCR switches over to the review playback mode for a few seconds and then resumes normal playback.

During Review Playback:

When you press the REPLAY button 4, the VCR briefly switches over to Cue playback and then plays back at normal speed in forward direction from the point where the REPLAY button 4 was pressed.

10

Image 10
Contents NV-FJ610 Series NV-FJ606 Series NV-FJ604 Series Contents Dear CustomerControls and Components 8 GIf the Sliding Cover of the Remote Control Becomes Detached Preparing the Remote ControlInserting Remote Control Batteries VCR OperationDo not Remove Outer Cover RemarksSetting the Remote Control to Operate Your TV TV OperationConnecting the VCR to a TV Or MethodAuto Setup Function HintSetting Playback Recording To Prevent Accidental Erasure of Recorded Contents Linked Timer Recordings with a Digital ReceiverTo Display the Approximate Remaining Tape Time To Suspend the Timer Recording Standby Mode Timer RecordingTo Programme with the On Screen Display OSD To Programme with ShowView Function Press the Numeric buttons To enter the ShowView numberSetting the Recording Date/Days Other Timer Recordings and Convenient FunctionsTo Check the Contents of Timer Recording Programmings To Check the Total Timer Recording Programming Time To Change a Timer Recording ProgrammingTo Cancel the Programming of a Timer Recording Search Functions To Cancel the Index Search or to Stop PlaybackTo Cancel the Intro-Jet Scan or to Stop Playback OperationEditing Assemble EditingTo Connect the VCR to a Decoder VCR ModeTV Mode To Connect the VCR to a Stereo Amplifier¡If your satellite Settings To Enter Newly Available TV Stations To Obtain the Best Tuning ConditionTo Preset Pay TV Stations List of TV Reception ChannelsTo Change the Type of Video System Colour TV system PALTo Restart the Auto Setup To Return the VCR to the Shipping ConditionTo Manually Adjust the Clock Setting the VCR’s ClockTo Activate the AutomaticTime Correction Function Sound mode during playback L/R Other Convenient Functions Various SettingsTape length indicator Tape speed indicatorOFF Language Setting To select Functions thenGlossary VPS Video Programme System/ PDC Programme Delivery ControlCrystal View Control CVC Pin Scart Socket√ The VCR Does Not Work Correctly Before Requesting Service√ On Screen Display Messages √ Playback Does Not Work Properly√ The Remote Control Does Not Work Correctly Adjusting the Playback Picture√ Recording Is Not Possible or Does Not Work Properly Cleaning the VCR Avoid sudden changes in temperatureKeep the VCR away from high temperatures Avoid humidity and dustSpecifications