Panasonic NV-FJ610, NV-FJ606, NV-FJ604 manual Auto Setup Function, Hint

Page 8

If you are connecting your VCR to a TV using Method 1, follow the operations explained below.

Auto Setup Function

The Auto Setup function automatically tunes all available TV stations and sets the VCR’s clock to the current date and time. If the tuning and time/date settings are not correct, performing timer recordings is not possible.

Hint:

If you select “Schweiz”, “Suisse” or “Svizzera” on the Country setting menu, the Functions setting menu appears automatically to let you set the item “Power save” to “ON”. In this setting, the VCR’s power consumption is minimised when it is off (Standby mode). To turn the VCR on, keep the VCR-ON/OFF button 1 pressed on the VCR main unit. It is not possible to turn it on with the remote control.

1

Switch the TV on.

2

Select the AV input on your TV.

3

Set the VCR/TV switch N to “VCR”.

4

Press the VCR-ON/OFF button

 

1 to switch the VCR on.

 

The Country setting menu

 

appears on the TV screen.

5

Press the Cursor buttons

 

(3421) P to select the

 

country where you are using

 

the VCR.

On Screen Display

Country

VCR

België

Deutschland

Belgique

Österreich

Belgien

Portugal

Danmark

Suomi

España

Sverige

France

Schweiz

Italia

Suisse

Nederland

Svizzera

Norge

others

Menu for Country setting

When the clock setting menu appears after Auto Setup has finished:

1Press the Cursor buttons (3421) P to set the correct time and date.

2Press the OK button R to conclude the setting.

To Confirm that the TV Stations Have Been Tuned Correctly by the Auto Setup Function

6 Press the OK button R and the

VCR’s Auto Setup automatically

starts and tunes all available TV

stations and also sets the clock.

This takes about 5 minutes.

VCR

Auto-Setup

Country

:

others

Tuning

:

Ch 21

1 Press the MENU button S to

display the OSD Main menu

on the TV screen.

On Screen Display

VCR

Main menu

Timer recording

Tuning

Clock setting

Functions

7When the indication shown on the right appears on the VCR display, the Auto Setup is complete.

8Press the MENU button S for more than 5 seconds so that the RF output channel number appears on the VCR display.

The initial setting is channel 36.

Indication during Auto Setup

VCR display

CVCSP

Indication when Auto Setup is complete

Indication when the RF output channel is 36 (example)

2

Press the Cursor buttons

 

(34) P to select “Tuning”

 

and press the OK button R

 

then select “Manual”.

3

Press the OK button R to

 

display the list of tuned TV

 

stations and confirm that all

 

available TV stations have

 

been set correctly.

VCR

Tuning

Manual

Auto-Setup Restart

Shipping condition

VCR

Tuning

Pos Name

Ch

1

ARD

1

2

ZDF

2

3

N3

19

4

HR3

26

5

BR3

18

6

RB3

3

7

SFB3

36

8

SW3

29

List of tuned TV stations (example)

9 Press the Numeric button “0”

2 so that the displayed RF

output channel number

Indication after changing the RF

changes to “– –”.

output channel to “– –”

 

10Press the OK button R to conclude the setting.

To Cancel the Auto Setup Before It Has Finished Press the EXIT button Q.

4Press the EXIT button Q to exit the On Screen Display.

When the station names and/or channel numbers have not been set correctly:

See page 21 for details.

8

Image 8
Contents NV-FJ610 Series NV-FJ606 Series NV-FJ604 Series Contents Dear CustomerControls and Components 8 GPreparing the Remote Control Inserting Remote Control BatteriesIf the Sliding Cover of the Remote Control Becomes Detached VCR OperationDo not Remove Outer Cover RemarksSetting the Remote Control to Operate Your TV TV OperationConnecting the VCR to a TV Or MethodAuto Setup Function HintSetting Playback Recording To Display the Approximate Remaining Tape Time Linked Timer Recordings with a Digital ReceiverTo Prevent Accidental Erasure of Recorded Contents To Programme with the On Screen Display OSD Timer RecordingTo Suspend the Timer Recording Standby Mode To Programme with ShowView Function Press the Numeric buttons To enter the ShowView numberTo Check the Contents of Timer Recording Programmings Other Timer Recordings and Convenient FunctionsSetting the Recording Date/Days To Cancel the Programming of a Timer Recording To Change a Timer Recording ProgrammingTo Check the Total Timer Recording Programming Time To Cancel the Index Search or to Stop Playback To Cancel the Intro-Jet Scan or to Stop PlaybackSearch Functions OperationEditing Assemble EditingVCR Mode TV ModeTo Connect the VCR to a Decoder To Connect the VCR to a Stereo Amplifier¡If your satellite Settings To Obtain the Best Tuning Condition To Preset Pay TV StationsTo Enter Newly Available TV Stations List of TV Reception ChannelsTo Change the Type of Video System Colour TV system PALTo Restart the Auto Setup To Return the VCR to the Shipping ConditionTo Activate the AutomaticTime Correction Function Setting the VCR’s ClockTo Manually Adjust the Clock Other Convenient Functions Various Settings Tape length indicatorSound mode during playback L/R Tape speed indicatorOFF Language Setting To select Functions thenGlossary VPS Video Programme System/ PDC Programme Delivery ControlCrystal View Control CVC Pin Scart SocketBefore Requesting Service √ On Screen Display Messages√ The VCR Does Not Work Correctly √ Playback Does Not Work Properly√ Recording Is Not Possible or Does Not Work Properly Adjusting the Playback Picture√ The Remote Control Does Not Work Correctly Avoid sudden changes in temperature Keep the VCR away from high temperaturesCleaning the VCR Avoid humidity and dustSpecifications