Panasonic NV-FJ606, NV-FJ604, NV-FJ610 manual Off

For Reduced the VCR’s Power

Consumption When the VCR Is Switched

Off

1	Press the MENU button S to display the Main menu on
	the TV screen.
		Functions		VCR
2	Press the Cursor buttons
		OSD	: ON
	(34) P to select “Functions”
		Power save	:	OFF
	then press the OK button R.	VCR display	: DIMMED
		AV2	: DECODER
		TV system	: PAL
		Language	: English
		Country	: others

For Automatic Change of the Brightness of the VCR Display When the VCR Is Switched Off

1 Press the MENU button S to display the Main menu on the TV screen.

VCR

Functions

2	Press the Cursor buttons (34)	OSD	: ON
	P to select “Functions” then
		Power save	: OFF
	press the OK button R.	VCR display	:	DIMMED
		AV2	: DECODER
		TV system	: PAL
		Language	: English
		Country	: others

3Press the Cursor buttons (3421) P to select “Power save” and the entry field for “Power save” in this order.

4Press the Cursor buttons (34) P to select “ON” or “OFF”.

ON: In this setting, the power consumption is greatly minimised when the VCR is turned off (Standby mode). In this case, the following happens:

≥The item “VCR display” is automatically set to “OFF”.

≥To turn the VCR on, keep the VCR-ON/OFF button 1 pressed on the VCR main unit. It is not possible to turn it on with the remote control.

≥The Power save function works only when the VCR is turned off (Standby mode). It does not operate in the timer recording standby mode.

After all programmed timer recordings have been made, and after all programmed data have been erased, the VCR switches over to the Power save mode.

≥When the VCR is off, Pay TV programmes cannot be watched on the TV because the signal from the connected decoder is not looped through. To watch them, turn on the VCR.

OFF: In this setting, the power consumption is not reduced when the VCR is turned off (Standby mode).

5Press the OK button R to conclude the setting.

6Press the EXIT button Q to exit the On Screen Display.

3Press the Cursor buttons (3421) P to select “VCR display” and the entry field for “VCR display” in this order.

4Press the Cursor buttons (34) P to select the desired condition.

≥When the VCR is switched off, the brightness of the VCR display is as follows:

ON:	Indications are brightly lit.
OFF:	Indications are not lit.
DIMMED:	Indications are dimly lit.

5Press the OK button R to conclude the setting.

6Press the EXIT button Q to exit the On Screen Display.

To Set the Type of External Source Equipment that Is Connected to the AV2 21-pin Scart Socket

1 Press the MENU button S to display the Main menu

	on the TV screen.
		Functions		VCR
2	Press the Cursor buttons (34)	OSD	: ON
	P to select “Functions” then	Power save	: OFF
		VCR display	: DIMMED
	press the OK button R.	AV2	:	DECODER
		TV system	: PAL
		Language	: English
		Country	: others

		Settings
3 Press the Cursor buttons (3421) P to select “AV2”
and “DECODER”, “TIMER” or “EXT” in this order.
4 Press the Cursor buttons (34) P to select the type of
external source equipment which is connected to		Various
the VCR’s AV2 21-pin socket.
≥ Set the external source equipment as follows:
DECODER: When a decoder is connected.
TIMER:	When a digital receiver is connected.
	≥ When this is set, it is possible to have
	timer recordings for a Digital Receiver
	execute automatically simply by
	switching the Digital Receiver into
	timer standby mode and then
	switching this VCR into timer
	recording standby mode.
	(See page 12.)
EXT:	When another VCR or a satellite
	receiver is connected.

5Press the OK button R to conclude the setting.

6Press the EXIT button Q to exit the On Screen Display.

27