Panasonic NV-FJ610, NV-FJ606, NV-FJ604 manual ¡If your satellite

Connecting the VCR to a Satellite Receiver or Digital Receiver

Satellite receiver here includes a digital receiver.

The connection method differs depending on the type of your satellite receiver.

For details about the connection, also read the satellite receiver’s operating instructions.

If the Satellite Receiver is Equipped with a 21-pin Scart Socket

If your satellite receiver is equipped with a 21-pin Scart socket, use a 21-pin Scart cable to connect the VCR.

For the connection to the TV, refer to page 7.

Be sure to keep the VCR, TV and satellite receiver switched off until you have finished all connections.

For your safety, do not connect or handle the equipment with wet hands.

a

Satellite receiver (not supplied)

		1
2	21-pin Scart socket	21-pin Scart cable
To an AC Mains socket	¡If your satellite
	receiver has a	(not supplied)
	VCR socket,
	connect the cable
	to it.

1Connect a 21-pin Scart cable (not supplied) to the AV2 21-pin Scart socket a on the VCR and to the 21-pin Scart socket on the satellite receiver.

2Connect the satellite receiver’s mains lead to an AC mains socket.

3Set “AV2” to “EXT” or “TIMER”. For details, see page 27.

If the Satellite Receiver Is Not Equipped with a 21-Pin Scart Socket

In case your satellite receiver is not equipped with a 21-pin Scart socket, use the RF coaxial cable to connect it to the VCR.

For the connection to the TV, refer to page 7.

Be sure to keep the VCR, TV and satellite receiver switched off until you have finished all connections.

For your safety, do not connect or handle the equipment with wet hands.

	Aerial (not supplied)
Satellite receiver (not supplied)		Aerial Input socket	Aerial lead
			(not supplied)
			1
3	Aerial Output
	socket

To an AC mains socket

2

c
	RF coaxial cable
	(not supplied)

1Connect the aerial lead to the Aerial Input socket on the satellite receiver.

2Connect the RF coaxial cable to the Aerial Output socket on the satellite receiver and to the Aerial Input socket c on the VCR.

3Connect the satellite receiver’s mains lead to an AC mains socket.

Hint:

¡The RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the VCR, e.g. re-adjust to channel 33.

20