To Programme with the
ShowView Function
The ShowView numbers assigned to each TV programme and published alongside the TV programme listings in newspapers and magazines make it extremely easy to set the VCR for timer recording.
The duration of a timer recording programmed with ShowView number may be slightly longer than the actual duration of the TV programme.
Preparations
³Confirm that the VCR is on.
³Confirm that the TV is on and the VCR viewing channel is selected.
³Insert a video cassette with an intact erasure prevention tab.
³Set the VCR/TV switch N to “VCR”.
Example:
Programming a timer recording of a TV programme with the ShowView number 920126
Operations
1 Press the SHOW VIEW button K to display the menu for entering the ShowView number on theTV.
7 Press theTIMER REC button C to switch the VCR
over to the timer recording standby mode.
³Check that “ç” is lit on the VCR display.
If it is flashing, check the timer recording details again. (See page 15.)
If “– – ” Appears under “Pos/Name” after Entering a ShowView Number
Pos/Name stands for Programme Position/TV Station Name. Normally, the name of the TV station or the number of the programme position is displayed under “Pos/Name”. However, if the TV station information was not automatically set during Auto Setup due to adverse reception conditions, the “– – ” indication appears instead.
In such a case, follow the operation steps below to correct it.
Press the Channel buttons : |
|
|
|
|
|
|
|
| |
repeatedly to select the programme |
|
|
|
|
|
|
|
|
|
| Timer recording |
|
|
| VCR | ||||
position on which the TV programme |
| Pos |
| DATE | Start | Stop | SP | VPS | |
to be recorded will be broadcast. | Name |
| ON | OFF | LP | PDC | |||
jjjjj |
| jj/jj | jj:jj jj:jj | jj | jjj |
| |||
|
| jj jjjjj |
| 15:00 | 17:00 | SP | jjj | ||
|
| jjjjj |
| jj/jj | jj:jj jj:jj | jj | jjj | ||
|
| jjjjj |
| jj/jj | jj:jj jj:jj | jj | jjj | ||
|
| jjjjj |
| jj/jj | jj:jj jj:jj | jj | jjj | ||
|
|
| “– – ” indication |
|
|
|
2 Press the Numeric buttons 2
to enter the ShowView number.
³If you have entered a wrong digit, press the Cursor button (2) P and then enter the correct digit.
On Screen Display
VCR
ShowView
9 2 0 1 2 6
After you have entered the information of a TV station, it remains stored in the VCR’s memory, and you do not need to enter it again in the future.
To Suspend the Timer Recording Standby Mode
3 Press the OK button R to display the programmed content.
4 Press the SP/LP button D speed.
³ SP provides standard |
|
|
|
|
|
|
|
Timer recording |
|
|
|
| VCR | ||
recording time and |
|
|
|
|
| ||
Pos |
| Start | Stop | SP | VPS | ||
optimum picture quality. | Name | DATE | ON | OFF | LP | PDC | |
ZDF | 27/10 | 20:00 | 21:30 |
|
| ON | |
SP | |||||||
LP provides doubled | jjjjj | jj/jj | jj:jj jj:jj | jj | jjj | ||
jjjjj | jj/jj | jj:jj jj:jj | jj | jjj | |||
jjjjj | jj/jj | jj:jj jj:jj | jj | jjj | |||
recording time with slightly | jjjjj | jj/jj | jj:jj | jj:jj | jj | jjj | |
|
|
|
|
|
|
| |
reduced picture quality. |
|
|
|
|
|
|
|
Regarding the “A” indication, refer to page 15. |
|
|
|
³To extend the ending time or to make any corrections, use the Cursor button (3421) P, the Channel buttons :, the DATE button ;, the ON button F, the OFF button E, the SP/LP button D.
³See page 15 for VPS/PDC recording.
5 Press theTAPE button B to select the corresponding
cassette tape length. (See page 26.)
6 Press the OK button R again to conclude the |
|
| ||||
settings. |
|
|
|
|
|
|
Timer recording |
|
|
| VCR | ||
³ To programme additional |
|
|
|
| ||
Pos | DATE | Start | Stop | SP | VPS | |
timer recordings, repeat | Name | ON | OFF | LP | PDC | |
ZDF | 27/10 | 20:00 | 21:30 | SP | ON | |
operation steps | jjjjj | jj/jj | jj:jj jj:jj | jj | jjj | |
jjjjj | jj/jj | jj:jj jj:jj | jj | jjj | ||
| jjjjj | jj/jj | jj:jj | jj:jj | jj | jjj |
|
|
|
|
|
|
|
14
When you want to use the VCR for playback, normal recording or some other operation before the programmed timer recording will be performed, you can temporarily suspend the timer recording standby mode by
pressing the TIMER REC button C so that the “ç” indication on the VCR display disappears.
However, after you have finished using the VCR, be sure to reactivate the timer recording standby mode by pressing the TIMER REC button C again, otherwise the programmed timer recording will not be performed.
Note:
³If the VCR is not put in the timer recording standby mode at the latest 10 minutes before the programmed timer recording starting time, the “ç” indication flashes on the VCR display. In this case, press the TIMER REC button C to put the VCR in the timer recording standby mode.