Panasonic AJ-D960EG manual Operation, Memory stop function

Setup menus

USER menu

<OPERATION> (continued)

	Item		Setting
								Description
No.	Superimposed	No.		Superimposed
	display				display
106	EE MODE	0000			NORMAL			This selects the EE mode output signals.
	SEL	0001				THRU		0: Signals are output with a delay equivalent to the length of
									ENGLISH
								internal signal processing.
								1: Signals are output directly, without internal processing, and
								so are output with no delay.
								<Note>
								When editing mode is selected, SDTI is selected as the video
								input signal, or INT SG is selected at either VIDEO or AUDIO,
								the internal operations are forcibly set to NORMAL.
107	PLAY	0000					0	This set the play delay time in frame increments.
		.			.
	DELAY	.		.
		.		.
		0015		15
108	CAP.LOCK	0000				4F		This selects the CAPSTAN LOCK mode for the 4F and 8F
		0001				8F		settings of the CF switch.
								0: 4F mode
								1: 8F mode
								<Note>
								This setup menu is not displayed in the 525 mode.
109	AUTO REW	0000				OFF		This selects whether to rewind the tape automatically to the
		0001				ON		tape start when the tape end is detected.
								0: The tape stops at the tape end.
								1: The tape is rewound to the tape start.
110	MEMORY	0000				OFF		This selects whether the VTR is to stop automatically when
	STOP	0001				ON		the counter value reaches “0” during a fast forwarding or
								rewinding operation in the CTL mode.
								0: The VTR does not stop.
								1: The VTR stops automatically.
								<Notes>
								1. The stop mode concerned is either the stop or the still-
								picture (SHTL STILL) mode depending on the setup menu
								No. 315 (AFTER CUE-UP) setting.
								2. When both the AUTO REW function and MEMORY function
								have been selected at the same time, the AUTO REW
								function takes precedence.

The underline on the setting item denotes the initial setting.

Memory stop function

The MEMORY STOP function does not work if it is activated within a range of 0 ± 2 frames.

FWD direction

	Zero
	point
3 REW button	1 FF button
4 FF button	2 REW button

zWhen the FF button is pressed, the VTR performs the regular fast forward operation since the zero point is not located in the direction of operation.

xWhen the REW button is pressed, the PREROLL lamp lights (the SHTL lamp lights as well), the VTR proceeds with the preroll operation, and it automatically stops when it reaches the position where the counter reads “0.”

cWhen the REW button is pressed, the VTR performs the regular rewinding operation since the zero point is not located in the direction of operation.

vWhen the FF button is pressed, the PREROLL lamp lights (the SHTL lamp lights as well), the VTR proceeds with the preroll operation, and it automatically stops when it reaches the position where the counter reads “0.”

65 (E)