Panasonic AJ-D960EG manual FRZ Mode, Stboff, Sof&Ej, Rec Inh, Light, Lamp, Flash, Eject SW

Setup menus

USER menu

<OPERATION> (continued)

	Item		Setting
						Description
No.	Superimposed	No.		Superimposed
	display			display
111	FRZ MODE	0000			DIS	This selects the output picture in the STANDBY OFF (HALF
	SEL	0001			STBOFF	LOADING) and EJECT modes.
		0002			SOF&EJ	0: The video output is muted.
						1: When the STANDBY OFF (HALF LOADING) mode is
						established, the picture being played back at the time is
						frozen and output.
						2: When the STANDBY OFF (HALF LOADING) or EJECT
						mode is established, the picture being played back at the
						time is frozen and output.
						<Notes>
						• Field freeze is used for freezing the picture.
						• In the EJECT mode, freeze frames are output only when 2
						(BLACK), 3 (BLACK1), 4 (GRAY) or 5 (GRAY1) is selected
						as the setup menu item No. 105 (AUTO EE SEL) setting.
112	V IN SEL	0000			OFF	This selects whether video input switching using the INPUT
	INH	0001			ON	SELECT switch is to be enabled or disabled.
		0002			REC	0: Video input switching using the INPUT SELECT switch is
						enabled.
						1: Video input switching using the INPUT SELECT switch is
						disabled.
						2: Video input switching using the INPUT SELECT switch
						after the unit has been transferred to a recording (but not
						editing) mode is disabled.
						<Note>
						Even when the 1 (ON) or 2 (REC) setting is selected to
						disable video input switching using the INPUT SELECT
						switch, it is still possible to set the setup menu item No. 600
						(INT SG).
113	A IN SEL	0000			OFF	This selects whether audio input switching using the INPUT
	INH	0001			ON	SELECT switch is to be enabled or disabled.
		0002			REC	0: Audio input switching using the INPUT SELECT switch is
						enabled.
						1: Audio input switching using the INPUT SELECT switch is
						disabled.
						2: Audio input switching using the INPUT SELECT switch
						after the unit has been transferred to a recording (but not
						editing) mode is disabled.
						<Note>
						Even when the 1 (ON) or 2 (REC) setting is selected to
						disable audio input switching using the INPUT SELECT
						switch, it is still possible to set the setup menu items No. 700
						(INT SG), No. 715 (CH1 IN SEL), No. 716 (CH2 IN SEL), No.
						717 (CH3 IN SEL), No. 718 (CH4 IN SEL), No. 719 (DIGI IN
						SEL12) and No. 720 (DIGI IN SEL34).
114	REC INH	0000			LIGHT	This selects whether to cause the REC INHIBIT lamp to flash
	LAMP	0001			FLASH	or light up when the cassette has been set to the accidental
						erasure prevention status.
						0: The lamp lights up.
						1: The lamp flashes.
						<Note>
						When the REC INHIBIT switch is set to ON, the REC INHIBIT
						lamp always lights regardless of the general setting status.
115	EJECT SW	0000			REC	This selects whether to enable or disable the operation of the
	INH	0001			OFF	EJECT button on the front panel.
						0: Operation is disabled while the unit is in the recording
						mode.
						1: Operation is enabled in all modes.

The underline on the setting item denotes the initial setting.

66 (E)