Panasonic AJ-D960EG manual User menu, Basic

Setup menus

USER menu

<BASIC>

	Item		Setting
							Description
No.	Superimposed	No.		Superimposed
	display			display
000	P-ROLL	0000				0S	This sets the preroll time which can be set from 0 to 15
		.		.
	TIME	.		.			seconds in 1-second increments.
		.		.				ENGLISH
		0005				5S	<Note>
		.			.
		.		.			When the unit is set to automatic editing [PREVIEW, AUTO
		.		.
		0015				15S	EDIT], the unit will not operate if the preroll time is set to 0
							seconds.
001	LOCAL	0000				DIS	This selects the buttons which can be operated on the front panel
	ENA	0001			ST&EJ		when the REMOTE/LOCAL switch has been set to REMOTE.
		0002				ENA	0: No buttons can be operated.
							1: Only the STOP and EJECT buttons can be operated.
							2: All buttons except for the RECORDER and PLAYER
							buttons can be operated.
002	TAPE	0000				±12h	This selects the 12 or 24 hour display for the CTL counter.
	TIMER	0001				24h	0: 12 hour display
							1: 24 hour display
003	REMAIN	0000				OFF	This selects whether to indicate the remaining tape time
	SEL	0001				ON	(REMAIN) on the front panel display and the superimposed
							display at the VIDEO OUT 3/SERIAL OUT 3 connectors.
							0: Remaining tape time is not displayed.
							1: Remaining tape time is displayed.
							<Note>
							• The remaining tape time is indicated at the far right of the
							second line on the front panel display and superimposed
							display.
							• Even when 1 (ON) has been selected, the remaining tape
							time is not displayed while it is being calculated after the
							cassette has been ejected or inserted.
							• When TIME has been selected as the setup menu item
							No. 008 (DISPLAY SEL) setting, the time is not indicated on
							the superimposed display.
							• No display appears if the freeze mark (F) is indicated by the
							setup menu item No. 111 (FRZ MODE SEL) setting.
							• No display appears if the tape start or end has been
							detected and BOT or EOT is displayed.
004	SETUP	0000				OFF	This selects whether the SETUP-MENU user file No. is dis-
	NUMBER	0001				ON	played on-screen.
							0: The SETUP-MENU No. is not displayed.
							1: The SETUP-MENU No. is displayed.
005	METER	0000				CUE	This selects whether the level meters are to display the CUE
	SELECT	0001			VIDEO		track signal level or the video signal level.
							0: The CUE track signal levels are displayed.
							1: The video signal levels are displayed.
006	SYNCHRO-	0000				OFF	This selects whether or not to synchronize between two VTRs.
	NIZE	0001				ON	0: No synchronization. The editing points deviate several
							frames, but editing can be started quickly.
							1: Synchronization. Allows for error-free editing.
007	SUPER	0000				OFF	This selects whether the time code and other super display
		0001				ON	which are output to the VIDEO OUT 3/SERIAL OUT 3 con-
		0002				SW	nector is to shown.
							0: Not shown.
							1: Shown.
							2: ON or OFF for the superimposed display is selected by
							pressing the PLAY button while holding down the SET
							button on the lower section of the front panel.
							<Note>
							The regular playback operation is performed if the PLAY
							button is pressed first.

The underline on the setting item denotes the initial setting.

61 (E)