Parker Hannifin 88-020292-01 A What YOU should have Ship KIT, Precautions, Installation Overview

WHAT YOU SHOULD HAVE (SHIP KIT)

Inspect your shipment carefully. You should have received one or more of the following:

Part	Part Number
E-AC Drive	E-AC
E-AC Drive Quick Reference Guide	88-020290-01

You may have ordered a motor from one of the following families of

Compumotor motors:

OS Motors

VS Motors

PRECAUTIONS

To prevent injuries to personnel and damage to equipment, observe the following guidelines:

•Never probe the drive. Hazardous voltages are present within the drive.

•Never open the drive. Opening the drive will void the warranty.

•Never increase the current setting to a value greater than that specified for the motor you are using. Excessive current may cause motor overheating and failure.

•Always remove AC power before changing or reconfiguring DIP switches.

INSTALLATION OVERVIEW

Topics in this chapter are arranged to lead you through the installation process in a step–by–step manner. Complete each step before proceeding to the next.

The order of topics in the installation procedure is:

•Quick Test

•Motor selection: specifications, speed/torque curves and dimensions

•Motor wiring—series vs. parallel

•DIP switch configuration

•Controller connections and 25 pin D-connector input/output schematic

•Drive mounting

•Motor mounting

•Connecting the load

•Connecting AC power

•Testing the installation

10 E-AC Drive Hardware Installation Guide Chapter 2 – Installation