RECONNECT THE DATA AND POWER CABLES
IMPORTANT: Data and power cable connectors fit together only one way. All connectors are keyed to ensure that they are inserted in the proper orientation. Examine the drive, motherboard, and cable connectors before installation so that connectors are properly aligned. Make sure connectors are seated in the mating connectors securely, but do not force the connection. When installing drive power cables, push the connectors straight in or out; do not rock connectors back and forth.
1.Connect the
a.Connect the gray connector of the data cable that came with your DX8000 to the
b.Connect the black connector of the data cable to the newly installed hard drive. Refer to Figure 16.
c.Connect the blue connector of the data cable to the primary (blue) IDE connector on the system motherboard. Refer to Figure 16.
18 | C1606M (6/04) |