Install Software on the New Drive
To complete the installation of a new primary hard disk in your DX8000, all necessary operating system and application software must be installed. Installation of this software will require that you configure the DX8000 to boot from the CD/DVD drive. Then follow the
CONFIGURE SYSTEM TO BOOT FROM CD/DVD
To change the boot drive from the hard disk to the CD/DVD drive:
1.Insert the DX8000 Reinstallation CD into your DVR’s CD/DVD drive.
2.Boot the DX8000 Series DVR by turning on the power switch, or restart the system if it is already running. Refer to the Operations and Programming Manual for instructions on restarting the DX8000.
24 | C1606M (6/04) |