Prepare Unit for Drive Installation
OPEN THE UNIT CHASSIS
WARNING: The chassis assembly includes parts with sharp edges. To avoid injury, use caution when working in and around the DX8000’s chassis and components.
1.If the DX8000 is mounted in a rack, remove it and transport it to an area that will provide full access to the unit chassis:
a.Disconnect any cables or connections that might restrict access to or the removal of the unit.
b.Unscrew the fasteners that are securing the unit in the rack.
c.Carefully lift the unit out of the rack.
NOTE: Removing the DX8000 from a rack may require more than one person. Refer to the DX8000
Installation Manual for rack mounting information.
2.Place the DX8000 on a flat surface with ample workspace.
C1606M (6/04) | 5 |