FUNAI ZV457MG9 owner manual Select the channel number to add or delete, Press Setup to exit

CHANNEL SETTING

ANALOG

5Select the channel number to add or delete.

•Use [CHANNEL / ] to cycle through only the memorized channels.

•Use [{ / B] to cycle through all the channels including the ones not memorized.

•Use [the Number buttons] to select a channel directly.

•When a memorized channel is selected, “Add” is checked and highlighted as a default.

•When an unmemorized channel is selected “Delete” is checked and highlighted as a default.

6Use [K / L] to select “Add” or “Delete”, then press [OK].

Manual Channel Preset

CH 2

Add

Delete

Your setting will be activated and it will automatically switch to the next channel so that you can continue adding or deleting channels.

7Press [SETUP] to exit.

DIGITAL

5Select the channel number to delete.

•Only the major channel is displayed in “Manual Channel Preset” menu. (The channel number displayed in the parenthesis is a virtual channel number)

•Use [CHANNEL / ] to cycle through only the memorized channels.

•You cannot use [{ / B] for the digital TV channel selection.

•Use [the Number buttons] to select a channel directly.

•When a memorized channel is selected, “Add” is checked and highlighted as a default.

•When an unmemorized channel is selected “Delete” is checked and highlighted as a default.

6Use [K / L] to select “Delete”, then press [OK]. Then select the next channel to delete.

•If the setting is complete, press [RETURN] to activate “Manual Channel Preset”.

Manual Channel Preset

DTV 2 (CH - - - )

Add

Delete

Your setting will be activated.

WARNING:

•For the digital TV channels, you cannot recover the deleted channels once they are deleted unless you perform the auto channel preset again.

Introduction Connections Basic Setup Recording Playback Editing Function

7Press [SETUP] to exit.

EN 29

Setup VCR Functions Others

Español