FUNAI ZV457MG9 Maintenance Servicing, Cleaning the cabinet, Cleaning discs, Auto head cleaning

Page 7

PRECAUTIONS

Maintenance

Servicing

•Please refer to relevant topics on “TROUBLESHOOTING” on pages 96-99 before returning the product.

•If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center.

Cleaning the cabinet

•Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive.

Cleaning discs

•When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion.

•Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.

Cleaning the disc lens

•If this unit still does not perform properly although you refer to the relevant sections and to “TROUBLESHOOTING” in this owner's manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

Disc handling

•Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

•Always store the disc in its protective case when it is not used.

Auto head cleaning

•Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture.

•Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated on the video heads after a long period of use, or the usage of rental or worn tapes can cause this problem. If a streaky or snowy picture appears during playback, the

video heads in your unit may need to be cleaned.

1.Please visit your local Audio/Video store and purchase a good quality VHS video head cleaner.

2.If a video head cleaner does not solve the problem, please consult your dealer or an Authorized Service Center.

© 2008 Funai Electric Co., Ltd.

Note

•Remember to read the instructions along with the video head cleaner before use.

•Clean video heads only when problems occur.

IR signal check

If the remote control does not work properly, you can test if the remote control sends out the infrared signal with AM radio or a digital camera (including built-in camera of cellular phone). It will help to define the cause of malfunction.

•With an AM radio:

Tune an AM radio to a station with no broadcasting. Press a button on remote control toward the radio. Sound will be fluttering when you press any key and the radio receives the signal. This means the remote control is working.

• With a digital camera (including built-in camera of cellular phone):

Direct a digital camera to remote control, press and hold a button on remote control. If infrared light appears through digital camera, the remote control is working.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Dolby Digital Recording

“Dolby® Digital Recording enables consumers to record high-quality video with stereo sound on recordable DVD discs. The technology, when utilized instead of PCM recording, also saves recordable disc space, allow- ing for higher video resolution or extended recording time on each DVD. DVDs created using Dolby Digital Recording will play back on all DVD-video players.” Note: This is true when the players are compatible with actual recordable DVD discs.

HDMI, the HDMI logo and High- Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

Introduction Connections Basic Setup Recording Playback Editing Function Setup VCR Functions

All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.

with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.

EN 5

Others

Español

Page 6 Page 8
Image 7
Page 6 Page 8
Contents ZV457MG9 Playable files Plug in the power cords of the devices to the AC outletYou can play back DVD+RW on most DVD players without Playable discsInsert a disc Place the disc properly. Press OPEN/CLOSE aChannel / or the Number buttons and for digital TV 6Press Stop C to stop recordingDo not Open PrecautionsFCC Warning PrecautionsTo Avoid the Hazards of Electrical Shock and Fire Supplied AccessoriesLocation and Handling Dew Condensation WarningCleaning the disc lens Disc handling Maintenance ServicingCleaning the cabinet Cleaning discsContents Contents Features Symbol Description FeaturesDescription refers to DVD+RW Description refers to DVD-RW Front Panel 21 2019 18 Functional Overview13 12 11 Rear Panel Functional Overview12 11 2625 Remote ControlOpen the cover Insert batteries Close the coverChannel / buttons DVD/VCR DVD mode Confirm button DVD/VCR Analog modeREW E button DVD/VCR DVD mode VCR modeDisplays the following Front Panel DisplayDisplay Message Current status of the unitAntenna Cable Connection Disconnect the power cord of your TV from the AC outletRF Modulator Connection Plug in the power cords of the devices to the AC outletConnections Basic With this setupAvailable on DVD only Method Analog audio Good picture Connection to a TVThis unit RCA video cableCables not included Hdmi Mode and Actual Output SignalsInterlaced Press Hdmi Progressive Actual Output Modes by MediaConnection Dolby Digital SettingConnection to AN Audio System AudioTurn on your TV Setting onBefore YOU Start Finding the Viewing Channel on Your TVHdmi Information Before YOU StartGuide to On-Screen Display / Menu MP3 Tag InformationFile Name Information Title Name InformationFirst, track name will be displayed Main Menu How to Insert a Cassette Tape Switching DVD / VCR ModeHow to Insert a Disc / Cassette Tape How to Insert a DiscSetting on Initial SettingScanning Channel SettingWhen scanning is over, press Setup to exit Auto Channel ScanAdding / Deleting Channels Channel SettingUse K / L to select Manual Channel Preset, then press OK General Setting menu will appearUse the Number buttons to select a channel directly Press Setup to exitSelect the channel number to add or delete Use K / L to select Add or Delete, then press OKPress Setup and turn off the unit Setting the ClockAuto Clock Setting Press Setup to exit Press STANDBY-ON y to turn off the unitDaylight Saving Time Setting the ClockManual Clock Setting Use K / L to select Clock Setting, then press OKSwitching Analog Mode Digital Mode Tuner SettingsChannel Selection Selecting TV Audio Tuner SettingsStereo Selecting TV Audio cont’dSAP secondary audio program DTV Closed Caption Use K / L to select Caption Service, then press OKSelect if you do not want DTV CC. This is the default Service 1 to ServiceClosed Caption Style Use K / L to select User Setting, then press OKUse K / L to select ON, then press Font Style Font SizeEdge Type Edge ColorUnrecordable Discs Recording ModeInformation on DVD Recording Recordable DiscsRecording the DTV Closed Caption Setting for Auto ChapterBefore Recording Make Recording CompatibleFollow the steps to record TV programs Press REC Mode to select a recording modeRefer to Recording Mode on Desired channel to recordPress Stop C Basic Recording & ONE-TOUCH Timer RecordingPress Stop C to exit the title list Press REC I repeatedly until the desired length appearPress Timer Use K / L to select New Program, then press OK Timer RecordingUse K / L to enter the date, then press B Press OK when all items are Entered Timer RecordingPress Timer SET Check the information To stop the timer recording in progressHow to select a channel number for the timer recording Stop C on the remote control is not effectivePriority of Overlapped Settings Hints for Timer RecordingOverwriting in the Middle of the Title Overwriting Unnecessary TitleOverwriting from the Beginning TitleOverwrite recording a Existing title B Existing title C Overwriting Unnecessary TitleHints for Overwriting Overwrite recording a Existing title B After overwritingConnection to an External Device Settings for AN External DeviceRecording to a DVDPress DVD Settings for AN External DeviceRecording from an External Device Press VCRPreparing for dubbing cassette tape to DVD BI-DIRECTIONAL DubbingUse K / L to select Recording, then press OK Use K / L to select Dubbing Mode, then press OKPress Stop C to stop the dubbing BI-DIRECTIONAL DubbingUse K / L to select VCR DVD, then press OK Use K / L to select DVD VCR, then press OKDisc will be protected Setting a Disc to ProtectUse K / L to select Yes, then press OK OFF ON, then press OK. e.g. DVD+RWFinalizing is completed Press Setup Use K / L to select Disc Edit, then press OKFinalizing a Disc Use K / L to select Finalize, then press OKAuto Finalizing Playing the Discs on Other DVD PlayersColor Systems Information on PlaybackPlayable Discs and Files Unplayable DiscsHint for DVD Playback CD Playback Mode menu will appearInformation on Playback PBC playback control for Video CDPress Stop C once to stop playback temporarily Basic PlaybackDirect Playback Press Play B to start playbackUse K / L to select Play, then Basic PlaybackPlayback from the Title List Use K / L to select a desired titleOr track/file, then press OK Playing Back an Audio CD and a CD-RW/-R with MP3 FilesUse K / L to select a desired folder Playback will be paused and sound will be muted Using the Title / Disc MenuPause During playback, press Pause FSkipping TV Commercials During Playback Special PlaybackResume Playback Fast Forward / Fast Reverse PlaybackZoom Special PlaybackStep by Step Playback Slow Forward / Slow Reverse PlaybackMarker Setting Repeat Playback Repeat this step until you program all the desired tracks Random PlaybackProgram Playback Use K / L to select Random Play, then press OKTitle / Chapter Search Using H / GUsing Display SearchTime Search SearchAudio CD Switching Audio Soundtrack Switching SubtitlesFor DVD-video Audio soundtrack will switch Reducing Block Noise Switching Virtual Surround SystemSwitching Camera Angles Selecting the Format of Audio and VideoPress DVD, then press Title Information on Disc EditingGuide to a Title List Editing DiscsUse K / L to select Edit, then Editing DiscsDeleting Titles Press DVD first Press TitleAfter this operation is completed, press Return to exit Editing DiscsPutting Names on Titles Use K / L to select Edit TitleSubmenu will appear Setting Chapter MarksUse K / L to select Add, then press OK Press Return twice to exitEdit Chapter Mark Delete Clearing Chapter MarksTo delete all chapter marks Clearing Chapter Marks cont’dAll chapter marks will be deleted Hiding Chapters Press Return to exit Setting Pictures for ThumbnailsPicture for thumbnail will be set Use K / L to select Yes, then press Dividing a TitleName, then press OK. e.g. DVD+RW When you finish entering a title name, pressPutting Name on Disc You can put a name on the disc and change it from this menuErasing Disc Compatible, then press OK Making Edits CompatibleContents List of SettingsTV-PG TV-G TV-Y7 List of SettingsVCR DVD Use K / L to select a desired item, then press OK SetupsPlayback Use K / L to select Playback, then press OKYes SetupsParental Lock Default OFF Playback cont’dAngle Icon Default on Disc Menu Language Default EnglishAudio Language Default Original Subtitle Language Default OFFSet Selected item DisplayUse K / L to select a desired item On pages 85-86Display cont’d FL Dimmer Default BrightChip To set the rating Change Password Change the current passwordUse the Number Buttons to enter new access password Canadian English RatingRefer to 1 to 2 on this page and set Progressive Scan Default OFFTV Aspect Default 43 Letter Box VideoRGB Range Default Normal When you finish with the setting, press Setup to exitFormat Default RGB Hdmi Audio Default onYour setting in recording will be initialized Reset AllSelect Yes again using K / L , then press OK Reset the setting to defaultTo resume playback 2Select the recording mode using REC ModeRecording mode VCR FunctionsVCR Functions One-touch Timer Recording OTRPress REC I to begin the one-touch timer recording You cannot pause the one-touch timer recordingOther Operations Symptom Remedy TroubleshootingPress OPEN/CLOSE a TroubleshootingOPEN/CLOSE a to take out the disc. The disc canceled during Repairing process MAY not workREC Frequently Asked QuestionsOutput Jacks Disc Error message Cause Solution Language Code Language CodeGlossary Tuner SpecificationsGeneral RecordingCódigos de Región EspañolDiscos Reproducibles Disco GrabableParte trasera de este aparato EspañolPresione REC I para iniciar la grabación Presione STANDBY-ON yBandeja de discos Para seleccionar un modo deDVD Presione Abra la bandeja deDe discos Memo Tel Customer Service1VMN25873
Top Page Image Contents