FUNAI ZV457MG9 owner manual Setups, Playback cont’d, Yes, Parental Lock Default OFF, Disc Audio

SETUPS

Playback (cont’d)

1 Parental Lock (Default: OFF)

Some DVD-video feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material.

Use [K / L] to select the desired level, then press [OK].

Note

•Press [CLEAR] to erase numbers entered incorrectly.

•When you forget the password or you want to clear all settings in “Parental Lock” menu, enter 4,7,3,7 using [the Number buttons] in password input window. Password will be cleared and parental levels will be set to “OFF”.

Introduction Connections

Parental Lock

OFF

8 [Adult]

7 [NC 17]

6 [R]

5 [PG R]

4 [PG 13]

3 [PG]

2 [G]

1 [Kid Safe]

If a password has not been set yet, proceed to A . If a password has been set already, proceed to B .

Note

•Parental lock function may not be available to some discs.

•With some DVD, it may be difficult to find if they are compatible with parental lock. Be sure to check if the parental lock function operates in the way that you have set.

•Record the password in case you forget it.

•If there is a DVD in the unit when you set up the parental lock, press [OPEN/CLOSE A] to activate the parental lock level.

A A password has not been set yet.

Use [K / L] to select “Yes”. Use [the Number buttons] to enter a new password except for 4737, then press [OK].

Change Password?			Password Input
	Yes	Yes
	No

Your setting will be activated.

B A password has been set already.

•Use [the Number buttons] to enter the current password.

Password Input

Your setting will be activated.

•If you want to change password, use [K / L] to select “Yes”. Use [the Number buttons] to enter a new password, then press [OK].

			<change the password>
Change Password?				Password Input
	Yes	Yes
	No

Your setting will be activated.

	2	Disc Audio	Basic
Choose the appropriate audio setting for your external
device.			Setup
It will only affect a disc playback.

Use [K / L] to select a desired item, then press [OK].

Disc Audio	Recording
A Dynamic Range Control
B PCM
C Dolby Digital

A Dynamic Range Control (Default : ON)

Set to “ON” to compress the range between soft and loud						Playback
sounds.
Use [K / L] to select a setting, then press [OK].
				Dynamic Range Control
					ON
					OFF
Your setting will be activated.						Editing
	Note
	• Dynamic range control function is available only on
	the discs which are recorded in the Dolby Digital
	format.
						Function
	B	PCM (Default : 48kHz)
						Setup
Use [K / L] to select a setting, then press [OK].
				PCM
					48kHz	VCR
					96kHz
						Functions
Your setting will be activated.
48kHz			: If your amplifier/decoder is NOT compatible
			with 96kHz PCM, select “48kHz”. 96kHz sound
			will be output in 48kHz.
96kHz			: If your amplifier/decoder is compatible with
			96kHz PCM, select “96kHz”. 96kHz sound will
			be output.			Others
	Note

When playing back disc with copyright protection

•Even if you select “96kHz”, the sound will be down sampled at 48kHz.

Español

EN 85