FUNAI ZV457MG9 owner manual Troubleshooting, Press OPEN/CLOSE a, Repairing process MAY not work

				TROUBLESHOOTING
	Symptom				Remedy
	There is no picture.				• If the main menu appears on the TV screen, press [RETURN] to exit.
					• Check if the progressive scan mode is set correctly according to your TV
					(page 90).
	Picture noise appears.				• Clean the disc with a cleaning cloth.
	There is no sound.				• If you are using DIGITAL AUDIO OUT (COAXIAL) jack, check the setting in
					“Disc Audio” (pages 85-86).
					• Clean the disc with a cleaning cloth.
	Sound is noisy.				• Clean the disc with a cleaning cloth.
	No DTS sound is output.				• This unit is not compatible with DTS sound.
	The disc does not play back.				• No disc is inserted.
					• A blank disc is inserted.
					• The disc is upside down. Insert the disc with the labeled side facing up.
					• The disc is not correctly inserted.
					• The unit cannot play back certain discs (such as a CD-ROM) (page 55).
					• The region code on the DVD-video does not match the unit (page 55).
					• Moisture has condensed inside the unit. Remove the disc and leave the
					unit turned on for about 2 hours until the moisture evaporates (page 4).
					• If the disc was recorded on another recorder, the unit cannot play back
					the disc if it was not finalized.
	Discs recorded on this unit cannot be				• If you are using DVD-RW/-R, please ensure you finalized the disc after
	played back on other DVD players.				recording (pages 53-54).
	The disc does not start playback from				• Resume playback was activated (page 61). Press [STOP C] twice.
	the beginning.				• You have inserted a disc whose title menu or DVD menu automatically
					appears on the TV screen when it is first inserted.
	The unit starts playing back the disc				• The DVD-video features an auto playback function.
	automatically.
	Some functions such as stop, search,				• Depending on the disc, you may not be able to do some of the
DVD	or slow-motion playback cannot be				operations. Refer to the instruction manual supplied with the disc.
	performed.
	The language for the sound track				• The title does not have the multilingual audio tracks.
	cannot be changed.				• The DVD-video prohibits the changing of the language for the sound
					track.
	The subtitle language cannot be				• Multilingual subtitle are not recorded on the DVD-video.
	changed or turned off.
	The angles cannot be changed.				• Multi-angles are not recorded on the DVD-video being played back.
					• The angle-change operation is whenever possible as long as the disc
					contains a multi-angle portion. Actual change will be performed when
					the portion has come up.
					• The DVD-video prohibits changing angles.
					• Try changing the angle using the DVD-video’s menu.
	Recording does not stop immediately				• It may take a few seconds for the unit to input disc data before
	after you press [STOP C].				recording stops.
	The disc tray does not open when you				• It may take a few seconds for the disc tray to open after you have
	press [OPEN/CLOSE A].				recorded or edited a disc. This is because the unit is adding disc data to
					the disc.
	“Repairing” appears on the TV screen.				• If there is a power failure or unplugging during recording, finalizing,
					formatting or editing (even after “Repairing” disappears), a repairing
					process will begin automatically just after turning the unit on again.
		Repairing
					It may take several minutes up to about several hours.
	In a case you intend to cancel the				• If you intend to cancel the repairing process, press [OPEN/CLOSE A]
	repairing process.				on the front panel, then select “Yes” and press [OK]. After that, press
					[OPEN/CLOSE A] to take out the disc. The disc canceled during the
		Do you want to cancel a repairing			repairing process MAY NOT work.
		process? When selecting “Yes”,
		the disc may not be usable.
			Yes
			No
		Repairing

EN 97

Introduction Connections Basic Setup Recording Playback Editing Function Setup VCR Functions Others

Español