JVC HR-J468EU Colour System Set, About Ntsc Playback, Colour SYSTEM, then press OK or # to select

Page 12

12EN

INFORMATIONONCOLOURSYSTEM

Colour System Set

1 2 3

2

4 5 6

7 8 9

0

4

1

?

OK

MENU

NOTES:

About NTSC Playback

●Some TVs shrink the picture vertically and place black bars at the top and bottom of the screen. This is not a malfunction on the part of either the video recorder or the TV.

●The picture may roll up and down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control.)

●The counter and tape remaining time readings will be incorrect.

●During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.

●Depending on the type of TV, the top and bottom portions of superimposed displays may be cut off during NTSC playback.

You can play back PAL, NTSC and MESECAM tapes, or record PAL and SECAM* signals on this recorder. Follow the procedure below to select the appropriate colour system.

*SECAM signals will be recorded as MESECAM on this recorder; MESECAM is the designation for tapes with SECAM signals that have been recorded on a MESECAM-compatible PAL video cassette recorder.

TURN ON THE RECORDER

1 Press

.

ACCESS MAIN MENU

SCREEN

2 Press MENU.

ACCESS MODE SET SCREEN

Press %Þ to move the

MAIN MENU

highlight bar (pointer) to

3 "MODE SET", then press

MODE SET

AUTO CH SET

OK or #.

MANUAL CH SET

INITIAL SET

[5°] =

[MENU] : EXIT

SELECT COLOUR SYSTEM

MODE

Press %Þ to move the highlight bar (pointer) to

"COLOUR SYSTEM", then press OK or # to select the

4 appropriate colour system.

HR-J468EU

HR-J311/268EU

MODE SET

MODE SET

PREVIOUS PAGE

PREVIOUS PAGE

AV2 SELECT

AV2

COLOUR SYSTEM PAL/NTSC

COLOUR SYSTEM PAL/NTSC

[5°] =

[5°] =

[MENU] : EXIT

[MENU] : EXIT

a- PAL/NTSC: To record PAL signals, or play back a PAL or NTSC tape.

b- MESECAM: To record SECAM signals, or play back a MESECAM tape.

RETURN TO NORMAL

SCREEN

5 Press MENU.

Image 12

Contents HR-J468EU HR-J311EU HR-J268EU Safety Precautions For ItalyTo HR-J468EU Owners To HR-J311/268EU OwnersCheck Contents Basic ConnectionsSituate Recorder Connect Recorder to MainsAuto Set Up If you are referring to the front display panelIf you are referring to the on-screen display International Telephone Country CodeLanguage Code Via an RF cable only RF connectionYour TV to the Video Channel. Refer to ThisPreset Download ENUIf both auto channel set and auto clock set have failed Language for the on-screen displayJust Clock Just Clock onLanguage Access Main Menu Screen ENABLE/DISABLE ON-SCREEN DisplayOn-Screen Displays Return to Normal ScreenPower Save Mode Access Mode SET Screen TV Auto Power OnLink Functions NexTView LinkColour System Set About Ntsc PlaybackPress %Þ to move the highlight bar pointer to Colour SYSTEM, then press OK or # to selectBasic Playback Load a CassettePoint Start PlaybackPlayback Features PlaybackActivate HIGH-SPEED Search Adjust Tracking Override Automatic TrackingManually Return to AutomaticSelect Picture Control SET Mode Auto SP→LP Timer appears only with the HR-J468EURepeat Playback Picture ControlBasic Recording Recording Features Reset CounterSelect Channel to Watch SET Counter DisplayEngage ITR Mode Instant Timer Recording ITRSET Recording Duration Press Record on the recorderS.T. Picture System Preparation#to set to on or OFF Recording PlaybackOr press Record on the recorder Timer Programming Timer Warning Satellite Tuner UsersPress SP/LP Express Timer Programming Before performing Express Timer ProgrammingStart Time TimeSET VPS/PDC Mode Timer ModeSET Tape Speed HR-J468EU only Engage RECORDER’SCheck, Cancel And Replace Programmes Press ä TimerPress Again to check More information. Each Time you press Next programmesAuto SP→LP Timer HR-J468EU only Auto TimerFor Example OK or #to select eitherProg REC Mode Automatic Satellite Programme RecordingBefore performing the following steps Edit From a Camcorder Input Mode Edit To Or From Another Video RecorderSET Recording DECK’S Start Source PlayerAV2 Select Setting RecorderHR-J468EU HR-J311/268EU Connection To Satellite Tuner Satellite Tuner UnitBack of TV Back of RecorderDecoder Set AV2 Select to AV2. pgConnecting Using a Decoder Select Input ModeConnect Decoder SET TunerShowview Setup NumberEnter Receiving Channel Position Number Guide Program Number SetAccess Auto CH SET Tuner SetAuto Channel Set Language of your choicePerform Auto Channel SET View Confirmation ScreenStoring Channels Manually When Receiving a Scrambled Broadcast Delete a ChannelChange Station Channel Position Press %Þ @ #until the item you want to move beginsAccess Manual Channel SET Screen Perform TuningAccess Manual Switch StationsTV Station And ID List Clock Set Turn the Recorder onSET Date and Time Default setting is OFF. Set as desired by pressing Recorder is preset to receive clock settingSET Just Clock Channel position to the number representingAccess Video Channel SET Mode Exit Video Channel SET ModeVideo Channel Set SET RF Output SystemNo power is applied to the recorder Remote control wont functionMains power cord is discon- nected If you’re using the RF OUT connec- tionRoubleshooting Ä remain lit on the display panel. Is there Problem? Quest Ions and Answers ENEN Index Rear View Remote Control VCR, TV Prog +/-,TV +/-, TV MutingMaximum recording time Rotary two-head herical scanIN/OUT x 1, IN/DECODER x Auto Set Up referring to the display panel Ex. Francais is selected for Belgium