JVC HR-J468EU Basic Connections, Check Contents, Situate Recorder, Connect Recorder to Mains

Page 3

INSTALLINGYOURNEWRECORDER

EN3

Basic Connections

It's essential that your video recorder be properly connected. Follow these steps carefully. THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.

CHECK CONTENTS

Make sure the package contains all of the accessories

1 listed in “Specifications” (☞ pg. 51).

SITUATE RECORDER

Aerial terminal

Back of TV

21-pin SCART connector

RF Cable (provided)

21-pin SCART Cable

Mains Power

Cord

TV Aerial Cable

2 Place the recorder on a stable, horizontal surface.
		CONNECT RECORDER TO
3		TV
	The connection method you use depends on the type of
		TV you have.

		RF CONNECTION
		● To Connect To A TV With NO AV Input Terminals . . .
		a– Disconnect the TV aerial cable from the TV.
		b– Connect the TV aerial cable to the ANT. IN jack
		on the rear panel of the recorder.
		c– Connect the provided RF cable between the RF.
		OUT jack on the rear panel of the recorder and the
		TV’s aerial terminal.

AV CONNECTION

●To Connect To A TV With AV Input Terminals . . .

a– Connect the aerial, recorder and TV as per “RF

CONNECTION”.

b– Connect an optional SCART cable between the

AV1 IN/OUT socket on the rear panel of the recorder and the TV’s 21-pin SCART connector.

		ENTREE
		ANT. IN
AV2 ENTREE/DECODEUR	AV1 ENTREE/SORTIE	ANTENNE
IN/DECODER	IN/OUT	SORTIE
		RF OUT

Rear view

Mains outlet	AV1 IN/OUT

CONNECT RECORDER TO MAINS

4 Plug the end of the mains power cord into a mains outlet.

Make AV connection if your TV has a 21-pin AV input connector (SCART) in order to reduce the possibility of interference.

After you plug the mains power cord into a mains outlet, the Country Set display appears on the TV screen and/or on the

recorder's front display panel when the button on the recorder/remote control is pressed for the first time to power on the recorder; go to page 4 to perform Auto Set Up.

Image 3

Contents HR-J468EU HR-J311EU HR-J268EU To HR-J311/268EU Owners Safety PrecautionsFor Italy To HR-J468EU OwnersConnect Recorder to Mains Check ContentsBasic Connections Situate RecorderInternational Telephone Country Code Auto Set UpIf you are referring to the front display panel If you are referring to the on-screen displayThis Language CodeVia an RF cable only RF connection Your TV to the Video Channel. Refer toENU Preset DownloadJust Clock on If both auto channel set and auto clock set have failedLanguage for the on-screen display Just ClockLanguage Return to Normal Screen Access Main Menu ScreenENABLE/DISABLE ON-SCREEN Display On-Screen DisplaysPower Save Mode NexTView Link Access Mode SET ScreenTV Auto Power On Link FunctionsColour SYSTEM, then press OK or # to select Colour System SetAbout Ntsc Playback Press %Þ to move the highlight bar pointer toStart Playback Basic PlaybackLoad a Cassette PointPlayback Features PlaybackActivate HIGH-SPEED Search Return to Automatic Adjust TrackingOverride Automatic Tracking ManuallyPicture Control Select Picture Control SET ModeAuto SP→LP Timer appears only with the HR-J468EU Repeat PlaybackBasic Recording SET Counter Display Recording FeaturesReset Counter Select Channel to WatchPress Record on the recorder Engage ITR ModeInstant Timer Recording ITR SET Recording DurationS.T. Picture System Preparation#to set to on or OFF Recording PlaybackOr press Record on the recorder Timer Programming Timer Warning Satellite Tuner UsersPress SP/LP Time Express Timer ProgrammingBefore performing Express Timer Programming Start TimeEngage RECORDER’S SET VPS/PDC ModeTimer Mode SET Tape Speed HR-J468EU onlyNext programmes Check, Cancel And Replace ProgrammesPress ä Timer Press Again to check More information. Each Time you pressOK or #to select either Auto SP→LP Timer HR-J468EU onlyAuto Timer For ExampleProg REC Mode Automatic Satellite Programme RecordingBefore performing the following steps Edit From a Camcorder Start Source Player Input ModeEdit To Or From Another Video Recorder SET Recording DECK’SAV2 Select Setting RecorderHR-J468EU HR-J311/268EU Back of Recorder Connection To Satellite TunerSatellite Tuner Unit Back of TVSet AV2 Select to AV2. pg DecoderSET Tuner Connecting Using a DecoderSelect Input Mode Connect DecoderGuide Program Number Set Showview SetupNumber Enter Receiving Channel Position NumberLanguage of your choice Access Auto CH SETTuner Set Auto Channel SetView Confirmation Screen Perform Auto Channel SETStoring Channels Manually Press %Þ @ #until the item you want to move begins When Receiving a Scrambled BroadcastDelete a Channel Change Station Channel PositionSwitch Stations Access Manual Channel SET ScreenPerform Tuning Access ManualTV Station And ID List Clock Set Turn the Recorder onSET Date and Time Channel position to the number representing Default setting is OFF. Set as desired by pressingRecorder is preset to receive clock setting SET Just ClockSET RF Output System Access Video Channel SET ModeExit Video Channel SET Mode Video Channel SetIf you’re using the RF OUT connec- tion No power is applied to the recorderRemote control wont function Mains power cord is discon- nectedRoubleshooting Quest Ions and Answers EN Ä remain lit on the display panel. Is there Problem?EN Index Rear View VCR, TV Prog +/-,TV +/-, TV Muting Remote ControlMaximum recording time Rotary two-head herical scanIN/OUT x 1, IN/DECODER x Ex. Francais is selected for Belgium Auto Set Up referring to the display panel