JVC HR-J311EU SET Tape Speed HR-J468EU only, SET VPS/PDC Mode, Engage RECORDER’S, Timer Mode

Page 25

ENTER CHANNEL POSITION

6

Press TV PROG +/–.

– P1 –

 

START

 

STOP

21:00 =

22:00

 

SP

 

VPS/PDC OFF

 

DATE

 

TV PROG

 

25.12

 

1

 

[+/–] =

 

ARD

 

 

 

 

[PROG] : EXIT

 

 

 

SP

 

 

 

SET TAPE SPEED

 

 

 

(HR-J468EU ONLY)

 

 

7 Press SP/LP ( ) to set the tape speed.

 

 

8

SET VPS/PDC MODE

 

Press VPS/PDC to select "ON" or "OFF".

 

 

If "VPS/PDC ON" is displayed on the screen or "VPS/

PDC" is lit on the display panel, VPS/PDC is set to ON.

If "VPS/PDC OFF" is displayed on the screen or "VPS/PDC"

 

is not lit on the display panel, VPS/PDC is set to OFF.

☞"VPS/PDC Recording" in the right column.

 

RETURN TO NORMAL

 

SCREEN

 

After confirming all information is correct, press PROG

 

or OK. "PROGRAM COMPLETED" appears on the

9 screen for about 5 seconds, then normal screen

 

appears.

 

● Repeat steps 1 – 9 for each additional programme.

 

ENGAGE RECORDER’S

10

TIMER MODE

Press ä (TIMER). The recorder turns off automatically

and ä appears on the display panel.

 

● To disengage the timer, press ä (TIMER) again.

EN25

Satellite Tuner Users

To timer-record a satellite broadcast using Express Timer Programming:

1 Set "AV2 SELECT" to "AV2" (☞ pg. 31).

2 Perform steps 1 – 10. Enter "L-2" for the channel position in step 6.

3 Set the satellite tuner to the appropriate channel before the selected programme begins.

4 Leave the satellite tuner's power on.

VPS/PDC Recording

Now available from some TV stations, PDC (Programme Delivery Control) and VPS (Video Programme System) are service designed to assure safe, accurate timer recording. With this system, special code signals are transmitted together with the audio/video signals. These code signals control your video recorder and have precedence over the advertised times you may have preset into the timer. This means that your recorder will start and stop recording when the preset TV programmes actually start and end — even if the broadcast time of a preset TV programme is changed.

NOTES:

● When you use Express Timer Programming, set the start time (VPS or PDC time) exactly as advertised in the TV listing. A different time than advertised will result in no recording.

● VPS/PDC recording is also possible when a satellite tuner or a cable system is connected to AV2 IN/DECODER on your recorder.

● VPS/PDC recording is also possible via the AV1 IN/OUT connector.

How to check if the station being received transmits a VPS/PDC signal

1 Press – –:– – until the channel position appears on the display panel.

2 Hold down START+ for about 5 seconds.

● "VPS/PDC" appears blinking on the display panel. If a VPS/PDC signal is detected from the station, "VPS/ PDC" will stop blinking.

If no VPS/PDC signal is detected from the station, "VPS/

PDC" will blink at a slower rate.

3 Press – –:– – or START+ again to return to normal display.

To Timer-Record Weekly Or Daily Serials . . .

. . . anytime during steps 2 through 9, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday – Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the corresponding indication disappear.

NOTE:

Timer Warning

If you have programmed your recorder to timer-record a programme or a series of programmes, a warning appears on screen to tell you that the recording is to start in 5 minutes.

–WARNING– TIMER RECORDING

TO START SOON

[]

You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, "PROGRAM FULL" appears on screen and "FULL" appears on the front display panel. To record the extra programme, you must first cancel any unnecessary programmes (☞ pg. 26).

NOTES:

●The warning only appears if

you’re not in the Timer mode at that time.

●If this recorder is being used as the player for tape dubbing, the warning screen is recorded on the tape in the other video recorder.

The warning blinks for the entire 5 minutes leading up to the start of timer recording. To clear the display, press .

Page 24 Page 26
Image 25
Page 24 Page 26
Contents HR-J468EU HR-J311EU HR-J268EU For Italy Safety PrecautionsTo HR-J468EU Owners To HR-J311/268EU OwnersBasic Connections Check ContentsSituate Recorder Connect Recorder to MainsIf you are referring to the front display panel Auto Set UpIf you are referring to the on-screen display International Telephone Country CodeVia an RF cable only RF connection Language CodeYour TV to the Video Channel. Refer to ThisENU Preset DownloadLanguage for the on-screen display If both auto channel set and auto clock set have failedJust Clock Just Clock onLanguage ENABLE/DISABLE ON-SCREEN Display Access Main Menu ScreenOn-Screen Displays Return to Normal ScreenPower Save Mode TV Auto Power On Access Mode SET ScreenLink Functions NexTView LinkAbout Ntsc Playback Colour System SetPress %Þ to move the highlight bar pointer to Colour SYSTEM, then press OK or # to selectLoad a Cassette Basic PlaybackPoint Start PlaybackPlayback Playback FeaturesActivate HIGH-SPEED Search Override Automatic Tracking Adjust TrackingManually Return to AutomaticAuto SP→LP Timer appears only with the HR-J468EU Select Picture Control SET ModeRepeat Playback Picture ControlBasic Recording Reset Counter Recording FeaturesSelect Channel to Watch SET Counter DisplayInstant Timer Recording ITR Engage ITR ModeSET Recording Duration Press Record on the recorderPreparation S.T. Picture System#to set to on or OFF Playback RecordingOr press Record on the recorder Timer Programming Satellite Tuner Users Timer WarningPress SP/LP Before performing Express Timer Programming Express Timer ProgrammingStart Time TimeTimer Mode SET VPS/PDC ModeSET Tape Speed HR-J468EU only Engage RECORDER’SPress ä Timer Check, Cancel And Replace ProgrammesPress Again to check More information. Each Time you press Next programmesAuto Timer Auto SP→LP Timer HR-J468EU onlyFor Example OK or #to select eitherAutomatic Satellite Programme Recording Prog REC ModeBefore performing the following steps Edit From a Camcorder Edit To Or From Another Video Recorder Input ModeSET Recording DECK’S Start Source PlayerRecorder AV2 Select SettingHR-J468EU HR-J311/268EU Satellite Tuner Unit Connection To Satellite TunerBack of TV Back of RecorderSet AV2 Select to AV2. pg DecoderSelect Input Mode Connecting Using a DecoderConnect Decoder SET TunerNumber Showview SetupEnter Receiving Channel Position Number Guide Program Number SetTuner Set Access Auto CH SETAuto Channel Set Language of your choiceView Confirmation Screen Perform Auto Channel SETStoring Channels Manually Delete a Channel When Receiving a Scrambled BroadcastChange Station Channel Position Press %Þ @ #until the item you want to move beginsPerform Tuning Access Manual Channel SET ScreenAccess Manual Switch StationsTV Station And ID List Turn the Recorder on Clock SetSET Date and Time Recorder is preset to receive clock setting Default setting is OFF. Set as desired by pressingSET Just Clock Channel position to the number representingExit Video Channel SET Mode Access Video Channel SET ModeVideo Channel Set SET RF Output SystemRemote control wont function No power is applied to the recorderMains power cord is discon- nected If you’re using the RF OUT connec- tionRoubleshooting Quest Ions and Answers EN Ä remain lit on the display panel. Is there Problem?EN Index Rear View VCR, TV Prog +/-,TV +/-, TV Muting Remote ControlRotary two-head herical scan Maximum recording timeIN/OUT x 1, IN/DECODER x Ex. Francais is selected for Belgium Auto Set Up referring to the display panel
Top Page Image Contents