JVC HR-J268EU, HR-J468EU Video Channel Set, Access Video Channel SET Mode, SET RF Output System

Page 44

44EN

SUBSIDIARYSETTINGS(cont.)

Video Channel Set

Video Channel (RF Output Channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable.

IMPORTANT

Perform the following steps only if —

—Video Channel Set has not been done correctly by the Auto Set Up function (☞ pg. 4).

—you set up the recorder's tuner by Preset Download (☞ pg. 6) instead of using the Auto Set Up function.

—interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your area.

—you change the connection between your recorder and TV from RF connection to AV connection, or vice versa.

If you have connected the video recorder to your TV via both the RF cable and a 21-pin SCART cable (AV connec- tion), since you do not need the video channel you have to set the video channel to off.

If you have connected the video recorder to your TV via the RF cable only (RF connection), you have to set the correct video channel.

Before performing the following steps, make sure the recorder's power is off and there is no cassette inserted in the recorder.

1

2

3

ACCESS VIDEO CHANNEL SET MODE

Hold down STOP (5/8) on the recorder until the display panel shows the following.

SET RF OUTPUT SYSTEM

The blinking number on the display indicates the RF output system of your country. If you have selected MAGYARORSZAG (36), CESKA REPUBLIKA (42), POLSKA (48) or OTHER EASTERN EUROPE (EE) for the country setting (pg. 4, 8), press %Þ to set to "2". For other countries, set to "1". Then press OK or #.

(1: B/G 2: D/K)

SET VIDEO CHANNEL

With AV Connection

Press TV PROG – until the display panel shows "1OUT– –" (or "2OUT– –").

●Now the video channel is set to off.

With RF Connection

Press TV PROG + or – to set the video recorder to a vacant channel between 22 and 69 which is not occupied by any local station in your area.

(Ex.) If channel 50 is available in your area

Then set your TV to UHF channel 50.

●If the two vertical white bars appear clearly on the screen as shown to the right, go to step 4.

●If the two vertical white bars do not appear clearly, re-set the video recorder to another vacant channel and try again.

NOTES:

●If you set the video recorder to a channel which is occupied by a local station or has neighbouring channels that are occupied by local stations, the picture reception quality will be affected and some interference noise will appear on the TV screen. Be sure to select a vacant channel which has no broadcast on neighbouring channels.

●If you cannot obtain the two vertical white bars clearly with any channel between 22 and 69, consult your JVC dealer.

EXIT VIDEO CHANNEL SET MODE

4 Press OK on the remote control.

With AV Connection:

To view picture signals from the video recorder, set your TV to its AV mode.

With RF Connection:

The channel on which the screen in step 3 appears clearly is your video channel.

To view picture signals from the video recorder, set your TV to the Video Channel.

Page 43 Page 45
Image 44
Page 43 Page 45
Contents HR-J468EU HR-J311EU HR-J268EU Safety Precautions For ItalyTo HR-J468EU Owners To HR-J311/268EU OwnersCheck Contents Basic ConnectionsSituate Recorder Connect Recorder to MainsAuto Set Up If you are referring to the front display panelIf you are referring to the on-screen display International Telephone Country CodeLanguage Code Via an RF cable only RF connectionYour TV to the Video Channel. Refer to ThisPreset Download ENUIf both auto channel set and auto clock set have failed Language for the on-screen displayJust Clock Just Clock onLanguage Access Main Menu Screen ENABLE/DISABLE ON-SCREEN DisplayOn-Screen Displays Return to Normal ScreenPower Save Mode Access Mode SET Screen TV Auto Power OnLink Functions NexTView LinkColour System Set About Ntsc PlaybackPress %Þ to move the highlight bar pointer to Colour SYSTEM, then press OK or # to selectBasic Playback Load a CassettePoint Start PlaybackActivate HIGH-SPEED Search Playback FeaturesPlayback Adjust Tracking Override Automatic TrackingManually Return to AutomaticSelect Picture Control SET Mode Auto SP→LP Timer appears only with the HR-J468EURepeat Playback Picture ControlBasic Recording Recording Features Reset CounterSelect Channel to Watch SET Counter DisplayEngage ITR Mode Instant Timer Recording ITRSET Recording Duration Press Record on the recorder#to set to on or OFF S.T. Picture SystemPreparation Or press Record on the recorder RecordingPlayback Timer Programming Press SP/LP Timer WarningSatellite Tuner Users Express Timer Programming Before performing Express Timer ProgrammingStart Time TimeSET VPS/PDC Mode Timer ModeSET Tape Speed HR-J468EU only Engage RECORDER’SCheck, Cancel And Replace Programmes Press ä TimerPress Again to check More information. Each Time you press Next programmesAuto SP→LP Timer HR-J468EU only Auto TimerFor Example OK or #to select eitherBefore performing the following steps Prog REC ModeAutomatic Satellite Programme Recording Edit From a Camcorder Input Mode Edit To Or From Another Video RecorderSET Recording DECK’S Start Source PlayerHR-J468EU HR-J311/268EU AV2 Select SettingRecorder Connection To Satellite Tuner Satellite Tuner UnitBack of TV Back of RecorderDecoder Set AV2 Select to AV2. pgConnecting Using a Decoder Select Input ModeConnect Decoder SET TunerShowview Setup NumberEnter Receiving Channel Position Number Guide Program Number SetAccess Auto CH SET Tuner SetAuto Channel Set Language of your choicePerform Auto Channel SET View Confirmation ScreenStoring Channels Manually When Receiving a Scrambled Broadcast Delete a ChannelChange Station Channel Position Press %Þ @ #until the item you want to move beginsAccess Manual Channel SET Screen Perform TuningAccess Manual Switch StationsTV Station And ID List SET Date and Time Clock SetTurn the Recorder on Default setting is OFF. Set as desired by pressing Recorder is preset to receive clock settingSET Just Clock Channel position to the number representingAccess Video Channel SET Mode Exit Video Channel SET ModeVideo Channel Set SET RF Output SystemNo power is applied to the recorder Remote control wont functionMains power cord is discon- nected If you’re using the RF OUT connec- tionRoubleshooting Ä remain lit on the display panel. Is there Problem? Quest Ions and Answers ENEN Index Rear View Remote Control VCR, TV Prog +/-,TV +/-, TV MutingIN/OUT x 1, IN/DECODER x Maximum recording timeRotary two-head herical scan Auto Set Up referring to the display panel Ex. Francais is selected for Belgium
Top Page Image Contents