JVC HR-J468EU Override Automatic Tracking, Adjust Tracking, Manually, Return to Automatic

Page 15

Manual Tracking

Your video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TV PROG buttons.

OVERRIDE AUTOMATIC

TRACKING

1

Press

on the remote to engage manual tracking.

 

 

ADJUST TRACKING

2

 

MANUALLY

Press TV PROG + or – to adjust tracking.

 

 

RETURN TO AUTOMATIC

 

 

TRACKING

 

Press

on the remote to re-engage automatic

3 tracking.

 

NOTE:

When a new tape is inserted, the recorder enters the automatic tracking mode automatically.

Instant ReView

Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the recorder is off and that the Timer mode is disengaged.

ACTIVATE INSTANT

REVIEW

1 Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last timer-recorded programme. Once it’s found, playback begins automatically.

●The front display panel tells you how many programmes have been timer-recorded. If you have, for example, 3 programmes, “REVIEW” and "3" appear and blink. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

NOTES:

●Instant ReView is not possible while the recorder is in the Timer mode.

●The number of recorded programmes will not be displayed on the front display panel after Auto Satellite Prog recording (☞ pg. 28).

EN15

Index Search

Your recorder automatically marks

index codes at the beginning of£ 2 each recording. This function gives

you quick access to any one of 9 index codes in either direction.

NOTE:

Before starting, make sure the recorder is in the Stop mode.

ACTIVATE INDEX SEARCH

1 Press @ or # (ª or £). “ª 1” or “£ 1” is displayed on screen and search begins in the corre- sponding direction.

●To access index codes 2 through 9, press @or # repeatedly until the correct index number is displayed. Ex.: To locate the beginning of B from the current

position, press @twice.

To locate the beginning of D from the current position, press #once.

Current position

A

B

C

D E

F

–2

 

–1

1

2

3

 

 

 

%

 

%

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Index number

●When the specified index code is located, playback begins automatically.

Skip Search

 

 

 

SKIP OVER UNWANTED

 

1

 

SECTIONS

 

Press 30 SEC 1 to 4 times during playback. Each press

 

 

initiates a 30-second period of fast-motion playback.

 

 

Normal playback resumes automatically.

NOTE:

To return to normal playback during a Skip Search, press PLAY.

Next Function Memory

The Next Function Memory "tells" the recorder what to do after rewinding. Before continuing, make sure the recorder is in the Stop mode.

a– For Automatic Start Of Playback After Tape Rewind . . .

. . . press REW, then press PLAY within 2 seconds. b– For Automatic Power Off After Tape Rewind . . .

. . . press REW, then press within 2 seconds.

c– For Automatic Timer Standby After Tape Rewind . . .

. . . press REW, then press (TIMER) within 2 seconds.

Page 14 Page 16
Image 15
Page 14 Page 16
Contents HR-J468EU HR-J311EU HR-J268EU To HR-J311/268EU Owners Safety PrecautionsFor Italy To HR-J468EU OwnersConnect Recorder to Mains Check ContentsBasic Connections Situate RecorderInternational Telephone Country Code Auto Set UpIf you are referring to the front display panel If you are referring to the on-screen displayThis Language CodeVia an RF cable only RF connection Your TV to the Video Channel. Refer toENU Preset DownloadJust Clock on If both auto channel set and auto clock set have failedLanguage for the on-screen display Just ClockLanguage Return to Normal Screen Access Main Menu ScreenENABLE/DISABLE ON-SCREEN Display On-Screen DisplaysPower Save Mode NexTView Link Access Mode SET ScreenTV Auto Power On Link FunctionsColour SYSTEM, then press OK or # to select Colour System SetAbout Ntsc Playback Press %Þ to move the highlight bar pointer toStart Playback Basic PlaybackLoad a Cassette PointPlayback Features PlaybackActivate HIGH-SPEED Search Return to Automatic Adjust TrackingOverride Automatic Tracking ManuallyPicture Control Select Picture Control SET ModeAuto SP→LP Timer appears only with the HR-J468EU Repeat PlaybackBasic Recording SET Counter Display Recording FeaturesReset Counter Select Channel to WatchPress Record on the recorder Engage ITR ModeInstant Timer Recording ITR SET Recording DurationS.T. Picture System Preparation#to set to on or OFF Recording PlaybackOr press Record on the recorder Timer Programming Timer Warning Satellite Tuner UsersPress SP/LP Time Express Timer ProgrammingBefore performing Express Timer Programming Start TimeEngage RECORDER’S SET VPS/PDC ModeTimer Mode SET Tape Speed HR-J468EU onlyNext programmes Check, Cancel And Replace ProgrammesPress ä Timer Press Again to check More information. Each Time you pressOK or #to select either Auto SP→LP Timer HR-J468EU onlyAuto Timer For ExampleProg REC Mode Automatic Satellite Programme RecordingBefore performing the following steps Edit From a Camcorder Start Source Player Input ModeEdit To Or From Another Video Recorder SET Recording DECK’SAV2 Select Setting RecorderHR-J468EU HR-J311/268EU Back of Recorder Connection To Satellite TunerSatellite Tuner Unit Back of TVSet AV2 Select to AV2. pg DecoderSET Tuner Connecting Using a DecoderSelect Input Mode Connect DecoderGuide Program Number Set Showview SetupNumber Enter Receiving Channel Position NumberLanguage of your choice Access Auto CH SETTuner Set Auto Channel SetView Confirmation Screen Perform Auto Channel SETStoring Channels Manually Press %Þ @ #until the item you want to move begins When Receiving a Scrambled BroadcastDelete a Channel Change Station Channel PositionSwitch Stations Access Manual Channel SET ScreenPerform Tuning Access ManualTV Station And ID List Clock Set Turn the Recorder onSET Date and Time Channel position to the number representing Default setting is OFF. Set as desired by pressingRecorder is preset to receive clock setting SET Just ClockSET RF Output System Access Video Channel SET ModeExit Video Channel SET Mode Video Channel SetIf you’re using the RF OUT connec- tion No power is applied to the recorderRemote control wont function Mains power cord is discon- nectedRoubleshooting Quest Ions and Answers EN Ä remain lit on the display panel. Is there Problem?EN Index Rear View VCR, TV Prog +/-,TV +/-, TV Muting Remote ControlMaximum recording time Rotary two-head herical scanIN/OUT x 1, IN/DECODER x Ex. Francais is selected for Belgium Auto Set Up referring to the display panel
Top Page Image Contents