JVC HR-J311EU, HR-J468EU, HR-J268EU Automatic Satellite Programme Recording, Prog REC Mode

Page 28

28ENTIMERRECORDING(cont.)

Automatic

Satellite

Programme

Recording

[J468/268EU]

DISPLAY

STANDBY/ON

TIMER

 

REC LINK

TV PROG

REC LINK

 

[J311EU]

 

STANDBY/ON

 

 

DISPLAY

TIMER

 

REC LINK

TV PROG

REC LINK

 

ATTENTION

●Be sure not to turn on the satellite tuner before the programme is executed; otherwise, the recorder will start recording when the satellite tuner's power is turned on.

●If you have connected another appliance other than a satellite tuner to the AV2 IN/DECODER connector, be sure not to engage the Auto Satellite Prog Rec mode; otherwise, the recorder will start recording when the connected appliance's power is turned on.

●Auto Satellite Prog recording and timer-recording cannot be done at the same time.

This facility allows you record automatically a satellite programme which is timer-programmed on your external satellite tuner. Connect a satellite tuner to the recorder's AV2 IN/DECODER connector (☞ pg. 32) and programme the timer on the satellite tuner; the recorder starts recording when the signals input from the satellite tuner to the AV2 IN/DECODER connector, and when there is no input signals the recorder stops recording and the power shuts off.

Before performing the following steps:

●Make sure the satellite tuner is connected to the recorder's AV2 IN/DECODER connector. (☞ pg. 32)

●Programme the timer on the satellite tuner.

●Insert a cassette with the safety tab in place.

SELECT AV2 SELECT MODE

1 Set "AV2 SELECT" to "AV2" (☞ pg. 31).

SET TAPE SPEED

(HR-J468EU ONLY)

2 Press SP/LP ( ) to set the tape speed.

ENGAGE AUTO SATELLITE

PROG REC MODE

Press and hold REC LINK on the recorder for about 2

seconds. The REC LINK indicator lights up and the

3 recorder turns off automatically.

● To disengage the Auto Satellite Prog Rec mode, press

REC LINK. The REC LINK indicator goes off.

● If the recorder's power is off, it is not possible to

engage the Auto Satellite Prog Rec mode.

NOTES:

●Auto Satellite Prog recording is possible with the AV2 IN/DECODER connector only. (☞ pg. 33)

●For timer programming of the satellite tuner, refer to the instruction manual of the satellite tuner.

●Auto Satellite Prog recording is not possible if your satellite tuner does not have a timer.

●The REC LINK indicator blinks while Auto Satellite Prog recording is in progress.

●Pressing the recorder's button while Auto Satellite Prog recording is in progress turns off the recorder's power and disengage the Auto Satellite Prog Rec mode.

●If there are more than one satellite programme you wish to record with Auto Satellite Prog Recording, it is not possible to set the different tape speed per each; the tape speed selected in step 2 will be applicable to all the programmes for Auto Satellite Prog recording.

●The B.E.S.T. system (☞ pg. 20) does not work while Auto Satellite Prog recording is in progress.

●Just Clock (☞ pg. 42) does not work when the Auto Satellite Prog Rec mode is engaged.

●Depending on the type of satellite tuner, the recorder may not record a slight portion of the beginning of the programme or may record slightly longer than the actual length of the programme.

●If you engage the Auto Satellite Prog Recording mode when the satellite tuner's power is on, the recorder will not start Auto Satellite Prog recording even though the REC LINK indicator blinks. When the satellite tuner shuts off once and is turned back on again, the recorder starts recording.

●When the Auto Satellite Prog Rec mode is engaged or the recorder's power is turned off after Auto Satellite Prog recording is finished, the recorder will not enter the Timer mode even though "AUTO TIMER" is set to "ON".

●After Auto Satellite Programme recording, the number of recorded programmes will not be displayed on the front display panel for the Instant ReView function (☞ pg. 15).

●You can also record a programme from your cable system in the same way if the system has a timer.

●When you press and hold the recorder's REC LINK button to engage the Auto Satellite Prog Rec mode, if the REC LINK indicator does not light but instead blinks quickly even though your satellite receiver's power is off, Auto Satellite Prog Recording will not work properly with that satellite receiver*.

If this is the case, perform "Express Timer Programming" (☞ pg. 24) to timer-record a satellite programme.

* Some satellite receivers output signals even if the power is off. Auto Satellite Prog Recording is not possible with those satellite receivers.

Page 27 Page 29
Image 28
Page 27 Page 29
Contents HR-J468EU HR-J311EU HR-J268EU Safety Precautions For ItalyTo HR-J468EU Owners To HR-J311/268EU OwnersCheck Contents Basic ConnectionsSituate Recorder Connect Recorder to MainsAuto Set Up If you are referring to the front display panelIf you are referring to the on-screen display International Telephone Country CodeLanguage Code Via an RF cable only RF connectionYour TV to the Video Channel. Refer to ThisPreset Download ENUIf both auto channel set and auto clock set have failed Language for the on-screen displayJust Clock Just Clock onLanguage Access Main Menu Screen ENABLE/DISABLE ON-SCREEN DisplayOn-Screen Displays Return to Normal ScreenPower Save Mode Access Mode SET Screen TV Auto Power OnLink Functions NexTView LinkColour System Set About Ntsc PlaybackPress %Þ to move the highlight bar pointer to Colour SYSTEM, then press OK or # to selectBasic Playback Load a CassettePoint Start PlaybackPlayback Playback FeaturesActivate HIGH-SPEED Search Adjust Tracking Override Automatic TrackingManually Return to AutomaticSelect Picture Control SET Mode Auto SP→LP Timer appears only with the HR-J468EURepeat Playback Picture ControlBasic Recording Recording Features Reset CounterSelect Channel to Watch SET Counter DisplayEngage ITR Mode Instant Timer Recording ITRSET Recording Duration Press Record on the recorderPreparation S.T. Picture System#to set to on or OFF Playback RecordingOr press Record on the recorder Timer Programming Satellite Tuner Users Timer WarningPress SP/LP Express Timer Programming Before performing Express Timer ProgrammingStart Time TimeSET VPS/PDC Mode Timer ModeSET Tape Speed HR-J468EU only Engage RECORDER’SCheck, Cancel And Replace Programmes Press ä TimerPress Again to check More information. Each Time you press Next programmesAuto SP→LP Timer HR-J468EU only Auto TimerFor Example OK or #to select eitherAutomatic Satellite Programme Recording Prog REC ModeBefore performing the following steps Edit From a Camcorder Input Mode Edit To Or From Another Video RecorderSET Recording DECK’S Start Source PlayerRecorder AV2 Select SettingHR-J468EU HR-J311/268EU Connection To Satellite Tuner Satellite Tuner UnitBack of TV Back of RecorderDecoder Set AV2 Select to AV2. pgConnecting Using a Decoder Select Input ModeConnect Decoder SET TunerShowview Setup NumberEnter Receiving Channel Position Number Guide Program Number SetAccess Auto CH SET Tuner SetAuto Channel Set Language of your choicePerform Auto Channel SET View Confirmation ScreenStoring Channels Manually When Receiving a Scrambled Broadcast Delete a ChannelChange Station Channel Position Press %Þ @ #until the item you want to move beginsAccess Manual Channel SET Screen Perform TuningAccess Manual Switch StationsTV Station And ID List Turn the Recorder on Clock SetSET Date and Time Default setting is OFF. Set as desired by pressing Recorder is preset to receive clock settingSET Just Clock Channel position to the number representingAccess Video Channel SET Mode Exit Video Channel SET ModeVideo Channel Set SET RF Output SystemNo power is applied to the recorder Remote control wont functionMains power cord is discon- nected If you’re using the RF OUT connec- tionRoubleshooting Ä remain lit on the display panel. Is there Problem? Quest Ions and Answers ENEN Index Rear View Remote Control VCR, TV Prog +/-,TV +/-, TV MutingRotary two-head herical scan Maximum recording timeIN/OUT x 1, IN/DECODER x Auto Set Up referring to the display panel Ex. Francais is selected for Belgium
Top Page Image Contents