JVC HR-J268EU, HR-J468EU, HR-J311EU Showview Setup, Enter Receiving Channel Position Number

[5°] = [MENU] : EXIT

(Ex.) If ZDF is received on channel position 2.

SUBSIDIARYSETTINGSEN35

SHOWVIEW Setup

IMPORTANT

Normally, Auto Set Up (☞ pg. 4), Preset Download (☞ pg. 6) or Auto Channel Set (☞ pg. 36) sets the Guide Program Numbers automatically. You need to set the Guide Program Numbers manually only in the following cases.

●When timer-programming with SHOWVIEW, the channel position, where the station you wish to record is received on your recorder, is not selected or when you add a channel after Auto Set Up or Auto Channel Set has taken place.

— Set the Guide Program Number for that station manually.

●When you delete a channel or change channel positions manually after Auto Set Up or Auto Channel Set has taken place.

— Set the Guide Program Numbers for all the receivable stations manually.

●When you wish to timer-record a satellite programme with SHOWVIEW.

— Set the Guide Program Numbers for all satellite broadcasts received on your satellite tuner.

Turn on the TV and select the VIDEO channel (or AV mode).

Guide Program Number Set

		ACCESS MAIN MENU
1		SCREEN
	Press MENU.
		ACCESS INITIAL SET
2		SCREEN
	Press %Þ to move the highlight bar (pointer) to
		"INITIAL SET", then press OK or #.
		ACCESS GUIDE PROG SET
3		SCREEN
	Press %Þ to move the highlight bar (pointer) to "GUIDE
		PROG SET", then press OK or #.
		ENTER GUIDE PROG
4		NUMBER
	Press %Þor NUMBER keys				GUIDE PROG SET
		to enter the Guide Program
		number for the desired
		station as shown in the TV		GUIDE PROG		TV PROG
		listings. Then press
					2	5
		OK or #.
			[5°] =
				[MENU] : EXIT
			(Ex.) When inputting the
					Guide Program
					number 2 for ZDF.

ENTER RECEIVING

CHANNEL POSITION

NUMBER

Press %Þ or NUMBER		GUIDE PROG SET
keys to input the number
5 of the recorder's channel
position on which the	GUIDE PROG		TV PROG
Guide Program number's
		2	2
broadcast is received.
			ZDF
Then press OK or #.

● If the satellite broadcast is received on your recorder's auxiliary channel "L-2", select

"L-2" for the channel position.

●Repeat steps 4 and 5 as necessary.

RETURN TO NORMAL

SCREEN

6 Press MENU.

Guide Program Number

"Guide Program (GUIDE PROG) number" refers to the assigned TV station numbers, according to broadcast area, for SHOWVIEW timer recording. The Guide Program numbers can be found in most TV listings.