JVC HR-J795EK manual Picture Quality, Manual Tracking, Picture Control

30

advanced features

Picture Quality

Manual Tracking

Your VCR is equipped with automatic tracking control. This will be adequate for most tapes and will automatically adjust the tracking to suit the particular tape in use but if you insert an old or worn tape, it may be necessary to manually adjust the track-

ing in order to get the best picture. If automatic tracking fails, you will notice noise bars appear- ing across the picture; you can correct this by manually overriding the tracking using the follow- ing steps.

override automatic tracking During playback, press /on the Remote Control to engage manual tracking.

adjust tracking manually Use the PR + or – buttons to adjust the tracking manually.

NOTES:

•Press /again to re-engage automatic tracking.

•When a new tape is inserted, the VCR returns to automatic tracking.

Picture Control

This feature allows you to select the most appropriate picture quality according to the type of tape or use of this VCR. The default setting is AUTO.

get to the mode set screen Press m. Move the highlight bar to MODE SET using the

Aand Bbuttons and press 3 OK / (or E).

select picture control mode Move the highlight bar to PICTURE CONTROL using the A

and Bbuttons. Press 3 OK / (or E) to select the desired mode:

•AUTO (NORM) Provides optimised picture benefits of B.E.S.T. Picture System. When B.E.S.T. is OFF, PICTURE CONTROL switches automatically from AUTO to NORM.

•EDIT Minimizes picture degradation during editing (record- ing or playback).

•SOFT Reduces image coarseness when viewing overplayed tapes containing lots of noise.

•SHARP Clearer, sharper-edged picture when viewing images with lots of flat, same-coloured surfaces such as cartoons.

MODE SET
B.E.S.T.	ON
FPICTURE CONTROL	AUTO
AUTO TIMER	OFF
O.S.D.	ON
DIRECT REC	ON
AUTO SP a LP TIMER	OFF
POWER SAVE	ON
AUTO POWER	OFF
[1] a k
[MENU]: EXIT

return to normal screen Press m.