JVC HR-J795EK manual Editing Using Another VCR

advanced features

41

Editing

Editing Using Another VCR

connect up Connect the two VCRs together using a 21-pin SCART cable. If this VCR is to be the player, connect its L-1 IN/OUT connecter to the recording VCR. If this VCR is to be the recorder, you can use either the L-1 IN/OUT or the L-2 IN/DECODER connecter to connect to the player VCR.

set recorder input mode The recording VCR mode must be set to AUX. If this VCR is the recorder, press AUX and /or PR to select L-1(if you’ve used the L-1 IN/OUT connecter) or L-2(if you’ve used the L-2 IN/DECODER connecter). If this VCR is the player, set O.S.D. to OFF. (
pg. 43)

set edit mode See Picture Control on page 31.

start source vcr Engage its PLAY mode.

start recording vcr Engage its RECORD mode.

TV Set Your VCR

Video Channel or AV Mode

21-pin SCART Cables

(not provided)

RF Cable

(provided)

	Another VCR	Your VCR as the Player
Your VCR as the Recorder	Your VCR	TV Set

RF Cable	Video Channel
	or AV Mode
(provided)
21-pin SCART Cables
(not provided)

Another VCR