JVC HR-J795EK manual Check Result of Test, Press the Aand Bbuttons to move

Page 38

38

advanced features

.

Check Result of Test

If the satellite receiver’s channel number has been changed to the same channel as you set ...

Press the Aand Bbuttons to move the

highlight bar to CHANGED TO ..., then press	3	OK /
		OK /

(or E) to finish the Sat Control Set mode.

If the satellite receiver’s channel number

has not been changed correctly ...

Press the Aand Bbuttons to move the

highlight bar to NOT CHANGED, then press	3	OK /
		OK /

(or E). Then perform the procedure again from entering the satellite receiver’s brand code.

SAT CONTROL SET

SAT PROG : 111

FCHANGED TO 111

FNOT CHANGED

[1] a k [MENU]: EXIT

Notes

•The Satellite Controller may not work with all types of satellite receiver.

•For some satellite receivers, you need to set its channel input mode to 2-digit.

•If your satellite receiver has more than two channel modes, be sure to set to All Channel Mode. For details, refer to the instruction manual of the satellite receiver.

•When selecting the satellite receiver’s preset position for testing, signals from the Remote Control may interfere with signals transmitted from the Satellite Controller. In this case, move the Remote Control as close to the recorder’s infrared beam receiving window as possible.

Image 38

Contents HR-J795EK Safety Precautions Blue to N Neutral or Black Brown to L Live or RedMoisture Condensation Some Do’s And Don’ts On The Safe Use Of EquipmentContents Front panel Diagram Key Front PanelWelcome to JVC Getting Everything ReadyPerform Auto Setup pg Auto Setup Three-Step Quick StartPreset Download Go straight to 2000 used as example only Check the ResultsFinish Off Perform Clock Set on Go to StepBasic Features Play PlaybackLoad a Video Cassette Stop & EjectVideo Heads Cleaning Rewind and Fast ForwardAdvanced JOG Dial Playback FeaturesPg , 24H Express Timer Programming pg , etc Pause During PlaybackHigh Speed Search Slow MotionVariable Speed Search Set the Tape Speed RecordingChoose a Programme Start RecordingChange Display Information Resetting the CounterDisplay Tape Remaining Time Instant Timer Recording Recording Resume FunctionPress p. You will see the following TV screen information Get to the Video Plus + ScreenEnter the PlusCode Number Return to Normal Screen Engage Timer Mode Enter Programme Details Express Timer ProgrammingGet to the Programme Screen AUX 24H Express Timer Programming Times as necessary Check, Cancel & Change ProgrammesPress c, then press oto disengage the timer mode Basic features Advanced Features Picture Control Picture QualityManual Tracking B.E.S.T Picture System Recording and Playback Using B.E.S.TAvoiding B.E.S.T. Time Delay Turning B.E.S.T. on or OFFSoundtrack Selection Sound ModesNicam Stereo and Bilingual Broadcasts Index Search Finding Specific ScenesSkip Search Instant ReViewLink Functions TV Auto Power OnYou can use your TV’s Remote Control to turn off the VCR NexTView LinkRecording on Direct RecButtons. Press Or E to select on or Satellite Receiver Control Settings Installing Satellite ControllerAppropriate number keys to enter the brand Setting satellite receiver’s brandSET using the Aand Bbuttons. Press Or E ModePress the Aand Bbuttons to move Or E to finish the Sat Control Set modeCheck Result of Test Auto Satellite Auto Record from Satellite ReceiverAdvanced features Editing Using Another VCR EditingEditing from a Camcorder Start recorder Press TOther Functions On-Screen Display O.S.DPower Save Mode Auto SP aLP TimerRepeat Playback Auto TimerAuto Power Off/3H Next Function MemoryConnection to a Stereo System AUX in or Tape MonitorVideo Channel Set Access Video Channel ModeExit Video Channel Set Mode Set Video ChannelTuner Set Auto Channel SetupSET using the Aand Bbuttons and press Or E twice Perform auto channel set Move the highlight bar to Auto CHPress Or E Manual Channel SetupButton on the Remote Control to move the highlight bar Delete a Channel To the preset position you want then pressChange Station Name Confirmation screen appearsButton to move the station to the new preset position Change Station Preset PositionButton on the Remote Control until the item you want to Then pressFine-Tuning Stored Channels TV Station ID GuideTV Station Channel Number Guide BBC1 BBC2 ITV CH4 CH5Or E. Set the correct year Setting the ClockOr E. The date Manually Setting Guide Program Numbers Guide Program NumbersCan the VCR indefinitely remain in the still mode? Uand cremain lit on the display panel. Is there a problem?Question and Answers Can the VCR indefinitely remain in the Record-Pause mode?Troubleshooting Symptom Possible CauseRecording Other Problems List of Terms Memo Memo Memo HR-J795EK