JVC HR-J795EK manual Recording

Page 58

58

subsidiary information

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

RECORDING

1.Recording cannot be started.

2.TV broadcasts cannot be recorded.

3.Tape-to-tape editing is not possible.

4.Camcorder recording is not possible.

•There is no cassette loaded, or the cassette loaded has had its record safety tab removed.

•L-1 or L-2 has been selected as the input mode.

•The source (another VCR, camcorder) has not been properly connected.

•All necessary power switches have not been turned on.

•The input mode is not correct.

•The camcorder has not been properly connected.

•The input mode is not correct.

Insert a cassette, or using adhesive tape, cover the hole where the tab was removed.

Set to the desired preset.

Confirm that the source is prop- erly connected.

Confirm that all units’ power switches are turned on.

Set the input mode to L-1 or L-2.

Confirm that the camcorder is properly connected.

Set the input mode to L-1 or L-2.

TIMER RECORDING

1.Timer recording won’t work.

2.Timer programming is not possible.

•The clock and/or the timer have been set incorrectly.

•The timer is not engaged.

•Timer recording is in progress.

Re-perform the clock and/or timer settings.

Press cand confirm that cis displayed on the display panel.

Timer programming can’t be performed while a timer recording is in progress. Wait until it finishes.

3.con the display panel won’t stop blinking.

4.c, Uand ,on the display panel won’t stop blinking.

•The timer is engaged but there’s no cassette loaded.

•The loaded cassette has had its record safety tab removed.

•The end of the tape was reached during timer recording.

Load a cassette with the record safety tab intact.

Remove the cassette and cover the hole with adhesive tape, or insert a cassette with the record safety tab intact.

The programme may not have been recorded in its entirety. Next time make sure you have enough time on the tape to record the entire programme.

5.cblinks for 10 seconds and the Timer mode is disengaged.

•chas been pressed when there are no programs in memory, or the timer record information has been pro- grammed incorrectly.

Check the programmed data and re-programme as necessary, then press cagain.

6.The VIDEO Plus+ system does not timer record properly.

•The VCR’s preset positions have been set incorrectly.

Refer to Guide Program Numbers (☞ pg. 55) and re-perform the procedure.

Page 57 Page 59
Image 58
Page 57 Page 59
Contents HR-J795EK Safety Precautions Blue to N Neutral or Black Brown to L Live or RedMoisture Condensation Some Do’s And Don’ts On The Safe Use Of EquipmentContents Front panel Diagram Key Front PanelWelcome to JVC Getting Everything ReadyPerform Auto Setup pg Auto Setup Three-Step Quick StartPreset Download Go straight to 2000 used as example only Check the ResultsFinish Off Perform Clock Set on Go to StepBasic Features Play PlaybackLoad a Video Cassette Stop & EjectVideo Heads Cleaning Rewind and Fast ForwardAdvanced JOG Dial Playback FeaturesPg , 24H Express Timer Programming pg , etc Pause During PlaybackVariable Speed Search Slow MotionHigh Speed Search Set the Tape Speed RecordingChoose a Programme Start RecordingDisplay Tape Remaining Time Resetting the CounterChange Display Information Instant Timer Recording Recording Resume FunctionEnter the PlusCode Number Get to the Video Plus + ScreenPress p. You will see the following TV screen information Return to Normal Screen Engage Timer Mode Get to the Programme Screen Express Timer ProgrammingEnter Programme Details AUX 24H Express Timer Programming Press c, then press oto disengage the timer mode Check, Cancel & Change ProgrammesTimes as necessary Basic features Advanced Features Manual Tracking Picture QualityPicture Control B.E.S.T Picture System Recording and Playback Using B.E.S.TAvoiding B.E.S.T. Time Delay Turning B.E.S.T. on or OFFNicam Stereo and Bilingual Broadcasts Sound ModesSoundtrack Selection Index Search Finding Specific ScenesSkip Search Instant ReViewLink Functions TV Auto Power OnYou can use your TV’s Remote Control to turn off the VCR NexTView LinkButtons. Press Or E to select on or Direct RecRecording on Satellite Receiver Control Settings Installing Satellite ControllerAppropriate number keys to enter the brand Setting satellite receiver’s brandSET using the Aand Bbuttons. Press Or E ModeCheck Result of Test Or E to finish the Sat Control Set modePress the Aand Bbuttons to move Auto Satellite Auto Record from Satellite ReceiverAdvanced features Editing Using Another VCR EditingEditing from a Camcorder Start recorder Press TOther Functions On-Screen Display O.S.DPower Save Mode Auto SP aLP TimerRepeat Playback Auto TimerAuto Power Off/3H Next Function MemoryConnection to a Stereo System AUX in or Tape MonitorVideo Channel Set Access Video Channel ModeExit Video Channel Set Mode Set Video ChannelTuner Set Auto Channel SetupSET using the Aand Bbuttons and press Or E twice Perform auto channel set Move the highlight bar to Auto CHButton on the Remote Control to move the highlight bar Manual Channel SetupPress Or E Delete a Channel To the preset position you want then pressChange Station Name Confirmation screen appearsButton to move the station to the new preset position Change Station Preset PositionButton on the Remote Control until the item you want to Then pressFine-Tuning Stored Channels TV Station ID GuideTV Station Channel Number Guide BBC1 BBC2 ITV CH4 CH5Or E. The date Setting the ClockOr E. Set the correct year Manually Setting Guide Program Numbers Guide Program NumbersCan the VCR indefinitely remain in the still mode? Uand cremain lit on the display panel. Is there a problem?Question and Answers Can the VCR indefinitely remain in the Record-Pause mode?Troubleshooting Symptom Possible CauseRecording Other Problems List of Terms Memo Memo Memo HR-J795EK
Top Page Image Contents