JVC HR-S9911U specifications Video Navigation, Other Problems

Page 28

Video Navigation

SYMPTOM	POSSIBLE CAUSE	CORRECTIVE ACTION
Title screen does not	● The current inserted tape has not been recorded	● Tape information cannot be shown if it has not
appear for the currently	on this VCR.	been recorded on this VCR.
inserted tape.

The VCR cannot search for	● Two (or more) tape numbers are recorded on one	● Video Navigation cannot work correctly on a tape
the correct program.	tape.	if it has more than one tape number. If this
		happens, fast-forward the tape up to its end, eject
		it, and try it again.

“MEMORY FULL” appears	● The VCR’s memory for Video Navigation is full.	● Check the remaining memory ( pg. 18). If it is
on the screen when you try		full, delete unnecessary Video Navigation
to start recording.		information ( pg. 17).

Other Problems

SYMPTOM	POSSIBLE CAUSE	CORRECTIVE ACTION
The channel cannot be	● Recording is in progress.	● Press PAUSE (9) to pause the recording, change
changed.		channels, then press PLAY (4) to resume
		recording.

Even though Auto or	● The clock setting data received from the host	● Select a different host channel during Semiauto
Semiauto Clock Set has	channel is incorrect.	Clock Set ( pg. 7), or perform Manual Clock Set
been performed, the clock		( pg. 7).
is incorrect.

— 28 —

Image 28

Contents HR-S9911U Declaration of Conformity How to use the Remote Video heads cleaningFront Panel IndexRear Panel Display Panel Remote On-Screen DisplayTo recall an indication Connections and Plug&Play Setting Video ConnectionRF Connection AV ConnectionLanguage Setting Initial SettingsClock Setting Tuner Setting Cable Box and/or DBS Receiver Control SettingSetting channels automatically Auto Channel Set Setting channels manually Manual Channel SetPlayback Basic PlaybackOn the VCR On the RemotePlayback Features Locating beginning of timer recordings Instant Review Adjusting picture condition Digital TBC/NRRecording Basic RecordingRecording Features Changing VCR Plus+ Setting Timer RecordingVCR Plus+ Timer Programing To use the VCR while it is in timer recording standby mode Express Timer Programing24HR Quick Programing Video Navigation Title Screen Program overlap warning displayDeactivating Video Navigation Editing Titles Editing tape titleEditing program title and category Deleting tape informationFinding Titles Timer warning display Function settingsOther Functions Checking tape positionWhen this function is set to on When this function is set to OFFJlip ID Number Setting Access Jlip ID Number Set screenSatellite Auto Recording Child LockMulti-Brand Remote Control Changing Remote Control CodeTV Brand Setting Cable Box or DBS Receiver Brand SettingEditing Editing from CamcorderSelect video input connector on recording VCR Example 1 When another VCR is VHS VCREditing with Another VCR Select input location on recording VCRAudio Dubbing Insert Editing and AV DubbingSelect input location Start dubbingSpecifications Locate start point, and engage Insert Editing modeLocate end point Start editingTroubleshooting PowerTimer Recording PlaybackOther Problems Video NavigationHOW to Locate Your JVC Service Center For Servicing Only in U.S.AWarranty Only in U.S.A Limited Warrantyconsumer VideoMemo