JVC HR-S9800U 12 EN, Setting clock manually, Set time, Set year

12 EN INITIAL SETTINGS (cont.)

4–7

8 4–6

VCR TV CABLE/DBS

1 2 3

4 5 6

7 8 9

0

Setting clock manually

— Manual Clock Set

First follow steps 1 to 3 on page 10, then go to the following steps.

4 Set time

On the front panel:	CLOCK SET
Press CH5° until the
	TIME	DATE YEAR
desired time appears,
	– –:– –AM	1/ 1	00
then press OK.	AUTO CLOCK : ON
	HOST CH	: AUTO	(CATV)
On the Remote:	D.S.T.	: AUTO
	TIME ZONE	: AUTO
Press %Þ until the
	PRESS (5,°), THEN (OK)

desired time appears,	PRESS (MENU) TO END
then press OK or #.

Holding CH 5° or %Þ changes the time in 30-minute intervals.

When the time is entered manually, “AUTO CLOCK” is automatically set to “OFF”, and “HOST CH” and “TIME ZONE” disappear.

5SetOn thedatefront panel:

Press CH 5° until the desired date appears, then press OK.

On the Remote:

Press %Þ until the desired date appears, then press OK or #.

6

4–7
8	4–6	7

Holding CH 5° or %Þ changes the date in 15- day intervals.

Set year

On the front panel:

Press CH5° until the desired year appears, then press OK twice.

On the Remote:

Press %Þuntil the desired year appears, then press OK or # twice.

Select D.S.T. mode

You can select either “ON” or “OFF”.

ON– Adjustment will be made by the built-in clock itself.

OFF– Select when Daylight Saving Time does not apply to you.

On the front panel:

Press CH5° to select the desired setting.

On the Remote:

Press %Þ to select the desired setting.

8StartPress MENUclock and normal screen appears.

To make corrections any time during the process

Press OK or # repeatedly until the item you want to change blinks, then press CH 5° or %Þ.